November 2006 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Wed Nov 1 15:45:10 EDT 2006
Ending: Wed Nov 29 11:57:08 EDT 2006
Messages: 203

• [MTD] CAFÉ NAND: Add 'slowtiming' parameter, default usedma and checkecc on   David Woodhouse
• [MTD] NAND: Add ECC debugging for CAFÉ   David Woodhouse
• [MTD] NAND: Add hardware ECC correction support to CAFÉ NAND driver   David Woodhouse
• [MTD] NAND: Add register debugging spew option to CAFÉ driver   David Woodhouse
• [MTD] NAND: CAFÉ NAND driver cleanup, fix ECC on reading empty flash   David Woodhouse
• [MTD] NAND: Café ECC -- remove spurious BUG ON() in err pos()   David Woodhouse
• [MTD] NAND: Disable ECC checking on CAFÉ since it's broken for now   David Woodhouse
• [MTD] NAND: Fix ECC settings in CAFÉ controller driver.   David Woodhouse
• [MTD] NAND: Fix timing calculation in CAFÉ debugging message   David Woodhouse
• [MTD] NAND: Reset Café controller before initialising.   David Woodhouse
• [MTD] NAND: Use register #defines throughout CAFÉ driver, not numbers   David Woodhouse
• [MTD NAND] Initial import of CAFÉ NAND driver.   David Woodhouse
• [MTD NAND] Initial import of CAFÉ NAND driver.   David Woodhouse
• [MTD NAND] OLPC CAFÉ driver update   David Woodhouse
• [SDHCI] Initialise Marvell CAFÉ controller with/without write-protect   David Woodhouse
• [SDHCI] Initialise Marvell CAFÉ controller with/without write-protect   David Woodhouse
• [BATTERY] Add initial implementation of battery class   David Woodhouse
• [BATTERY] Add Kconfig and Makefile bits for PMU battery   David Woodhouse
• [BATTERY] Add status_caps file, showing which status flags the driver supports   David Woodhouse
• [BATTERY] Add support for OLPC battery   David Woodhouse
• [BATTERY] Add support for PMU battery information   David Woodhouse
• [BATTERY] Fix status_caps for AC supplies to 'on-line' not 'present'   David Woodhouse
• [BATTERY] Fix typo preventing olpc-battery from compiling   David Woodhouse
• [BATTERY] Run Lindent on drivers/battery/   David Woodhouse
• [BATTERY] Separate status flags with space, not comma   David Woodhouse
• [BATTERY] Switch to using device_attribute, from the hardware driver   David Woodhouse
• [BATTERY] Update OLPC battery driver   David Woodhouse
• [BATTERY] Update properties list.   David Woodhouse
• [DCON] Default to turning anti-aliasing off   David Woodhouse
• [DCON] Enable GPIO7 input to ensure DCONIRQ works correctly.   David Woodhouse
• [DCON] Enable GPIO7 input to ensure DCONIRQ works correctly.   David Woodhouse
• [DCON] Fix DCON->VGA transition timing.   David Woodhouse
• [DCON] Fix DCON->VGA transition timing.   David Woodhouse
• [DCON] Switch back to using anti-aliasing by default.   David Woodhouse
• [DCON] Switch panel off cleanly to sleep mode on reboot.   David Woodhouse
• [DCON] Switch panel off cleanly to sleep mode on reboot.   David Woodhouse
• [DCON] Update register initialisation for DCON ASIC   David Woodhouse
• [DCON] Update register initialisation for DCON ASIC   David Woodhouse
• [GXFB] Don't disable gamma correction if it was set up by the BIOS/loader   David Woodhouse
• [GXFB] Maximum powerup time is 64ms, per AMD.   David Woodhouse
• [JFFS2] Speed up mounts by inreasing INO_CACHE_HASHSIZE to 1024   David Woodhouse
• [LIBERTAS] Don't attempt to use devices with too-old boot firmware.   David Woodhouse
• [LIBERTAS] Don't attempt to use devices with too-old boot firmware.   David Woodhouse
• [LIBERTAS] Fix legacy charset in copyright headers   David Woodhouse
• [LIBERTAS] Fix legacy charset in copyright headers   David Woodhouse
• [LIBERTAS] Fix legacy charset in copyright headers   David Woodhouse
• [LIBERTAS] Hook up EC GPIO pin to reset Libertas when it goes AWOL   David Woodhouse
• [LIBERTAS] Reduce reset pulse to 100ms   David Woodhouse
• [LIBERTAS] Set default debug level to include 'FATAL' messages.   David Woodhouse
• [LIBERTAS] Set default debug level to include 'FATAL' messages.   David Woodhouse
• [LIBERTAS] Set default debug level to include 'FATAL' messages.   David Woodhouse
• [MMC] Fail I/O to stopped SD card; avoid dividing by zero   David Woodhouse
• [MTD] NAND: Combined oob buffer so it's contiguous with data   David Woodhouse
• [MTD] NAND: Correct setting of chip->oob_poi OOB buffer   David Woodhouse
• [MTD] NAND: Remove empty block ECC workaround   David Woodhouse
• [OLPC touchpad] Support PT-only and GS-only operation modes.   David Woodhouse
• [OLPC] Add basic power management handling for CS5536   David Woodhouse
• [OLPC] Add poweroff function, check for ROM signature to detect board.   David Woodhouse
• [OLPC] ROM BIOS signature probing less verbose, export 'machine_is_olpc' flag   David Woodhouse
• [OLPC] Turn on OLPC power management handling in .config   David Woodhouse
• [PATCH] Add a configuration option to avoid automatically probing VGA   Jordan Crouse
• [PATCH] Add a configuration option to avoid automatically probing VGA   Jordan Crouse
• [PATCH] Add DCON support to the GX framebuffer driver   Jordan Crouse
• [PATCH] Add DCON support to the GX framebuffer driver   Jordan Crouse
• [PATCH] Consolidate the backlight into the gxfb_dcon driver   Jordan Crouse
• [PATCH] DCON: Add the DCON platform device   Jordan Crouse
• [PATCH] DCON: Add the DCON platform device   Jordan Crouse
• [PATCH] Detect if the OLPC DCON was detected by the BIOS   Jordan Crouse
• [PATCH] Detect if the OLPC DCON was detected by the BIOS   Jordan Crouse
• [PATCH] fix `make headers_install'   David Woodhouse
• [PATCH] Fix headers_check for O= builds; disable automatic check on UML.   David Woodhouse
• [PATCH] Fix headers_check for O= builds; disable automatic check on UML.   David Woodhouse
• [PATCH] gxfb: Add an ioctl() to set the gamma correction RAM   Jordan Crouse
• [PATCH] gxfb: Set the right registers to tweak the sync polarity   Jordan Crouse
• [PATCH] gxfb: Set the right registers to tweak the sync polarity   Jordan Crouse
• [PATCH] gxfb: Add timings for the OLPC LCD   Jordan Crouse
• [PATCH] gxfb: Add timings for the OLPC LCD   Jordan Crouse
• [PATCH] gxfb: Fixup flatpanel detection   Jordan Crouse
• [PATCH] gxfb: Fixup flatpanel detection   Jordan Crouse
• [PATCH] gxfb: Fixups for the AMD Geode GX framebuffer driver   Jordan Crouse
• [PATCH] gxfb: Fixups for the AMD Geode GX framebuffer driver   Jordan Crouse
• [PATCH] gxfb: Replace FBSIZE config option with a command line variable   David Woodhouse
• [PATCH] gxfb: Replace FBSIZE config option with a command line variable   David Woodhouse
• [PATCH] gxfb: Support command line options   Jordan Crouse
• [PATCH] gxfb: Support command line options   Jordan Crouse
• [PATCH] gxfb: Support flat panel timings   Jordan Crouse
• [PATCH] gxfb: Support flat panel timings   Jordan Crouse
• [PATCH] gxfb: Turn on the flatpanel power and data   Jordan Crouse
• [PATCH] gxfb: Turn on the flatpanel power and data   Jordan Crouse
• [PATCH] libertas: don't oops on module unload after boot2 flash   Dan Williams
• [PATCH] scx200_acb: Use PCI I/O resource when appropriate   Jordan Crouse
• [PATCH] scx200_acb: Use PCI I/O resource when appropriate   Jordan Crouse
• [SPARC]: Clean up asm-sparc/elf.h pollution in userspace.   David Woodhouse
• add a recommended .config file; this is what I use for testing.   Andres Salomon
• Add core CAFE camera controller (from Jonathan Corbet)   Andres Salomon
• Add core CAFE camera controller (from Jonathan Corbet)   Andres Salomon
• Add sysprof support, from fedora's kernel   Andres Salomon
• add the new touchpad model signature   Andres Salomon
• Add the OV7670 sensor driver (from Jonathan Corbet)   Andres Salomon
• Add the OV7670 sensor driver (from Jonathan Corbet)   Andres Salomon
• Add two desired video formats to v4l2 (from Jonathan Corbet)   Andres Salomon
• Add two desired video formats to v4l2 (from Jonathan Corbet)   Andres Salomon
• Add Zephaniah's touchpad driver (part of psmouse).   Andres Salomon
• Add Zephaniah's touchpad driver (part of psmouse).   Andres Salomon
• Add Zephaniah's touchpad driver (part of psmouse).   Andres Salomon
• Add Zephaniah's touchpad driver (part of psmouse).   Andres Salomon
• build evdev, serio, serport, and libps2 statically   Andres Salomon
• build fix for sysprof (oops!)   Andres Salomon
• build fix from Jonathon Corbet; remember to include vmalloc.h.   Andres Salomon
• Camera driver update   Jonathan Corbet
• Committing atkbd.c additional keycodes patch for Zephaniah.   Chris Ball
• Committing atkbd.c additional keycodes patch for Zephaniah.   Chris Ball
• compile cafe-nand in statically so that we can boot off it   Andres Salomon
• DCON: Update initialisation sequence for DCON ASIC.   David Woodhouse
• disable a bunch of drivers for hardware we don't have.   Andres Salomon
• Don't flip the video image by 180 degrees.   Andres Salomon
• drop pt_regs arguments from olpc_process_byte (and down the chain)   Andres Salomon
• drop pt_regs arguments from olpc_process_byte (and down the chain)   Andres Salomon
• Enable IPV6 and NETFILTER in .config   Andres Salomon
• Enable IPV6 and NETFILTER in .config   Andres Salomon
• enable MMC_DEBUG, at cjb's request   Andres Salomon
• enable MMC_DEBUG, at cjb's request   Andres Salomon
• enable more IPV6 stuff, and the generic pci ide driver   Andres Salomon
• enable more IPV6 stuff, and the generic pci ide driver   Andres Salomon
• enable sysprof as a module   Andres Salomon
• Ensure the queue is flushed when destroying the mmc block device   Pierre Ossman
• FB: Get the Geode GX frambuffer size from the BIOS   Jordan Crouse
• FB: Get the Geode GX frambuffer size from the BIOS   Jordan Crouse
• Fix cafe_ccic reference in makefile   Andres Salomon
• GEODE: Update and fixup the PCI IDs for the CS5535   Jordan Crouse
• GEODE: Update and fixup the PCI IDs for the CS5535   Jordan Crouse
• Here's an updated version of the camera driver (against current OLPC   Jonathan Corbet
• Here's the latest version of the camera driver. It has a few bug fixes;   Jonathan Corbet
• include autoconf.h instead of config.h in dcon code (which was   Andres Salomon
• include autoconf.h instead of config.h in dcon code (which was   Andres Salomon
• Instead of renaming the cafe ccic driver, fix the makefile.   Andres Salomon
• libertas: add quality information to getscantable   Marcelo Tosatti
• libertas: cap reset attempts to a maximum of 10   Marcelo Tosatti
• libertas: consolidate some REASSOCIATION code blocks   Dan Williams
• libertas: convert extscan from wlanconfig to debugfs   Marcelo Tosatti
• libertas: convert getscantable from wlanconfig to debugfs   Marcelo Tosatti
• libertas: convert setuserscan from wlanconfig to debugfs   Marcelo Tosatti
• libertas: convert sleepparams from wlanconfig to debugfs   Marcelo Tosatti
• libertas: convert to deferred association   Dan Williams
• libertas: do not attempt to transmit during device removal   Marcelo Tosatti
• libertas: dynamically allocate scan command structure   Dan Williams
• libertas: fix deadlock on failed command; don't return without unlocking driver lock   Dan Williams
• libertas: fix usb_complete_t prototype   Marcelo Tosatti
• libertas: get rid of wlan_cpu_to_le{16,32,64}, use kernel macros   Marcelo Tosatti
• libertas: pass right argument to wlan_cmd_802_11_set_wep   Dan Williams
• libertas: remove boot2 update code, now performed by Dan's python tool   Marcelo Tosatti
• libertas: remove debugging printk from wlan_debugfs.c   Marcelo Tosatti
• libertas: remove obsolete check for zero-length SSID   Dan Williams
• libertas: remove redundant set of link state on associate   Dan Williams
• libertas: remove unneded packed attribute from HostCmd structure   Marcelo Tosatti
• libertas: remove unused label   Dan Williams
• libertas: remove useless indent   Dan Williams
• libertas: removed unused cmd_get_log waitqueue   Marcelo Tosatti
• libertas: replace MRVDRV_MAX_SSID_LENGTH with IW_ESSID_MAX_SIZE   Dan Williams
• libertas: replace PRINTM with dprintk   Marcelo Tosatti
• libertas: reset wait loop count   Marcelo Tosatti
• libertas: send reset before USB device is shutdown   Marcelo Tosatti
• libertas: small return value handling cleanup   Dan Williams
• libertas: spacing cleanups   Dan Williams
• libertas: whack 2800 bytes of stack   Dan Williams
• libertas: work around non-WE-21-aware userspace tools   Dan Williams
• Make atkbd and i8042 modules again; qemu can deal.   Andres Salomon
• Make atkbd and i8042 modules again; qemu can deal.   Andres Salomon
• more config changes; statically compile KBD, and add PIIX driver (qemu)   Andres Salomon
• more config changes; statically compile KBD, and add PIIX driver (qemu)   Andres Salomon
• PATCH: Add the OLPC DCON to the backlight infrastructure   Jordan Crouse
• PATCH: Add the OLPC DCON to the backlight infrastructure   Jordan Crouse
• PATCH: crypto: Add CryptoAPI support for the Geode LX AES Module   Jordan Crouse
• PATCH: crypto: Add CryptoAPI support for the Geode LX AES Module   Jordan Crouse
• Poke at some magic registers to enable SD on the cafe chip.   Andres Salomon
• Power fixes from Jonathon Corbet; Marvell changed the camera power up.   Andres Salomon
• remove more unused stuff from .config; also disabled in fedora olpc kern   Andres Salomon
• Remove redundant LEAVE() + return   Dan Williams
• Remove the iomem size check. The sdhci spec is ambiguous on this.   Andres Salomon
• Rename cafe_ccic.c -> cafe-ccic.c   Andres Salomon
• Replace custom #define WLAN_MAX_SSID_LENGTH with IW_ESSID_MAX_SIZE   Dan Williams
• Revert "[LIBERTAS] Don't attempt to use devices with too-old boot firmware."   David Woodhouse
• Revert the CONFIG_MMC_DEBUG addition, now that we know what's up with SD.   Chris Ball
• Revert the CONFIG_MMC_DEBUG addition, now that we know what's up with SD.   Chris Ball
• Revert the last 3 commits (high speed SD); it breaks w/ some SD cards.   Andres Salomon
• revert the last commit; new FPGA code should make this unnecessary   Andres Salomon
• scx200_acb: Add a module option to tune the SMB_CLK   Jordan Crouse
• scx200_acb: Add a module option to tune the SMB_CLK   Jordan Crouse
• Set the default min/max for each axis to be in line w/ what we discovered   Andres Salomon
• Set the default min/max for each axis to be in line w/ what we discovered   Andres Salomon
• Set the default min/max for each axis to be in line w/ what we discovered   Andres Salomon
• Set the default min/max for each axis to be in line w/ what we discovered   Andres Salomon
• Small tweak from Jon to restore 30fps rate on btest boards.   Andres Salomon
• Trivial commit for mail gateway testing, as requested by Ivan.   Chris Ball
• Trivial commit for mail gateway testing, as requested by Ivan.   Chris Ball
• update .config; drop some unused stuff, and cafe camera update.   Andres Salomon
• update config   Andres Salomon
• Update config for new cafe camera driver name   Andres Salomon
• Update config for new cafe camera driver name   Andres Salomon
• Update from Jon Corbet:   Andres Salomon
• Update from Jonathon for the camera driver.   Andres Salomon
• Update from Jonathon for the camera driver.   Andres Salomon
• Update from Mark Foster for dcon asic; updated init necessary   Andres Salomon

Last message date: Wed Nov 29 11:57:08 EDT 2006
Archived on: Wed Nov 29 12:02:11 EDT 2006

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...