[Server-devel] ansible install on a 1.75 with low RAM

[James Cameron]

On Thu, Jun 05, 2014 at 07:23:35PM -0700, Sameer Verma wrote:
> I've been helping Anish with some server testing. I have a XO 1.75
> with 512MB RAM. After installing the 13.2 build, and following
> instructions from
> (https://github.com/XSCE/xsce/blob/master/docs/INSTALL.rst)
> 
> ./runansible fails repeatedly, and at varying successive points. I
> suspect this is due to a low amount of RAM and no swap (I see memory
> page errors at the console).

Without diagnosis of those errors, I'm worried you may have more than
just depletion of memory.

-- 
James Cameron
http://quozl.linux.org.au/