[Server-devel] Issue with 2 B4s and a C2

[David Leeming]

OK - the problem is intermittent because about 1 out of every 10 boots, the
C2 does find the school mesh. I am close to the antenna, and using the B4s
as controls. They are all set up identically and I reinstalled the C2
several times to be sure.

How can I generate and locate the tarball on the C2? Can't find the info on
the wiki.


David Leeming
Technical Advisor, People First Network
Tel: +677 76396(m) 24419(h) 26358 (w)
www.leeming-consulting.com


-----Original Message-----
From: Martin Langhoff [mailto:martin.langhoff at gmail.com] 
Sent: Thursday, 3 July 2008 1:57 a.m.
To: David Leeming
Cc: Phill Hardstaff; Ian Thomson; Pia Waugh; XS Devel
Subject: Re: Issue with 2 B4s and a C2

On Wed, Jul 2, 2008 at 5:41 AM, David Leeming
<leeming at pipolfastaem.gov.sb> wrote:
> AFTER clicking register, and rebooting, it won't find the school mesh and
> eventually settles on teh simple mesh. Then olpc-netstatus reports:

 - Have you connected successfully with this machine? (we've seen a
small % of machines with badly connected antennae)

 - Does this happen consistently? (a few tries)

 - Are you close/far from the active antenna?

 - As Wad says, can you send the file that olpc-netlog generates?

cheers,


m
-- 
 martin.langhoff at gmail.com
 martin at laptop.org -- School Server Architect
 - ask interesting questions
 - don't get distracted with shiny stuff - working code first
 - http://wiki.laptop.org/go/User:Martinlanghoff