hdmi out
Barry Vercoe
barry at laptop.org.au
Sun Aug 18 09:24:13 EDT 2013
Jon
now with powersave enabled attached
-- barry
On 18/08/2013 9:24 p.m., Jon Nettleton wrote:
>
>
> On Aug 18, 2013 10:30 AM, "Barry Vercoe" <barry at laptop.org.au
> <mailto:barry at laptop.org.au>> wrote:
> >
> > Jon, yes the file exists on our system here. Contains just a zero.
>
> Also when HDMI is plugged in? Could you send me a full dmesg output of
> the HDMI handshake with auto power save enabled?
>
> >
> > -- barry
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.laptop.org/pipermail/devel/attachments/20130819/84b69903/attachment.html>
-------------- next part --------------
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.7_xo4-20130705.0203.olpc.e77de3d (mockbuild at koji3.laptop.org) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 PREEMPT Fri Jul 5 02:20:07 EDT 2013
[ 0.000000] CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: Marvell MMP2 (Device Tree Support), model: 4C2
[ 0.000000] cma: CMA: reserved 256 MiB at 1c000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 260096
[ 0.000000] free_area_init_node: node 0, pgdat c06847a8, node_mem_map c0728000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 193040 pages, LIFO batch:31
[ 0.000000] HighMem zone: 512 pages used for memmap
[ 0.000000] HighMem zone: 65024 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258064
[ 0.000000] Kernel command line: console=ttyS2,115200 console=tty0 selinux=0 fbcon=font:SUN12x22 fb_size=8M coherent_pool=64M
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1016MB = 1016MB total
[ 0.000000] Memory: 754700k/754700k available, 285684k reserved, 262144K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc060f270 (6173 kB)
.init : 0xc0610000 - 0xc064dc9c ( 248 kB)
.data : 0xc064e000 - 0xc068c6d8 ( 250 kB)
.bss : 0xc068c6fc - 0xc0727a0c ( 621 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] sched_clock: 32 bits at 6MHz, resolution 153ns, wraps every 660764ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000847] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 0.040123] pid_max: default: 32768 minimum: 301
[ 0.040482] Mount-cache hash table entries: 512
[ 0.040482] CPU: Testing write buffer coherency: ok
[ 0.044186] ftrace: allocating 16397 entries in 49 pages
[ 0.071271] hw perfevents: no hardware support available
[ 0.071271] Setting up static identity map for 0x45c7a8 - 0x45c800
[ 0.073151] devtmpfs: initialized
[ 0.104508] NET: Registered protocol family 16
[ 0.170229] DMA: preallocated 65536 KiB pool for atomic coherent allocations
[ 0.170229] L310 cache controller enabled
[ 0.170382] l2x0: 8 ways, CACHE_ID 0x880000ed, AUX_CTRL 0x32860000, Cache size: 524288 B
[ 0.170406] mmp3_fabric_ddr_config: 0x00001000, 0x00000000, 0x00000000
[ 0.170435] mmp3_fabric_ddr_config: DDR interleave size 524288 KB
[ 0.170457] mmp3_fabric_ddr_config: DDR Port Priority ff003030, ff003030
[ 0.170478] Dual MC enabled, config 0x20
[ 0.172018] mmp-sram d1030000.asram: initialized
[ 0.174843] mmp-sram d1020000.vsram: initialized
[ 0.175248] OLPC board revision 4C2 (EC api 5)
[ 0.175456] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
[ 0.175481] hw-breakpoint: Debug register access (0xee004e52) caused undefined instruction on CPU 0
[ 0.178641] bio: create slab <bio-0> at 0
[ 0.178852] SCSI subsystem initialized
[ 0.179271] usbcore: registered new interface driver usbfs
[ 0.179368] usbcore: registered new interface driver hub
[ 0.179486] usbcore: registered new device driver usb
[ 0.180039] i2c-gpio 0.camera-i2c: using pins 166 (SDA) and 165 (SCL)
[ 0.180398] i2c-gpio 0.dcon-i2c: using pins 167 (SDA) and 168 (SCL)
[ 0.180698] i2c-gpio 0.hdmi-i2c: using pins 5 (SDA) and 4 (SCL)
[ 0.181200] I2C: i2c-3: PXA I2C adapter
[ 0.181620] I2C: i2c-4: PXA I2C adapter
[ 0.182103] I2C: i2c-5: PXA I2C adapter
[ 0.182565] I2C: i2c-6: PXA I2C adapter
[ 0.182565] Linux video capture interface: v2.00
[ 0.182666] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.183314] cfg80211: Calling CRDA to update world regulatory domain
[ 0.183481] Switching to clocksource clocksource
[ 0.196686] NET: Registered protocol family 2
[ 0.196686] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.196891] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.197293] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.198426] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.198723] TCP: reno registered
[ 0.198762] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.198793] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.198793] NET: Registered protocol family 1
[ 0.199105] Trying to unpack rootfs image as initramfs...
[ 0.233812] Freeing initrd memory: 6604K
[ 0.236648] highmem bounce pool size: 64 pages
[ 0.236783] VFS: Disk quotas dquot_6.5.2
[ 0.236934] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.237360] msgmni has been set to 1486
[ 0.237961] io scheduler noop registered
[ 0.237961] io scheduler deadline registered
[ 0.238027] io scheduler cfq registered (default)
[ 0.238027] pxa168fb_gfx_init_platform_driver
[ 0.238287] pxa168fb_probe: 0
[ 0.238287] pxa168fb_gfx_probe: OLPC DCON panel isr_clear_mask not been initialized!
[ 0.238301] MMIO start 0xd420b000, size 4096
[ 0.253681] ---------FB DMA buffer phy addr : 20000000
[ 0.272264] fb0: sclk_src 0 clk_get_rate = 400000000
[ 0.272264] pxa168fb_init_modes
[ 0.272284] pxa168fb: set_screen for fbi 0
[ 0.272562] pxa168fb_open GFX layer, fbi 0 opened 0 times ----
[ 0.272562] pxa168fb: set_screen for fbi 0
[ 0.293673] Console: switching to colour frame buffer device 100x40
[ 0.315314] pxa168fb: frame buffer device was loaded to /dev/fb0 <OLPC DCON panel>.
[ 0.316091] ---------FBoverlay DMA buffer phy addr : 21400000
[ 0.319781] pxa168fb: set_screen for fbi 0
[ 0.321153] pxa168fb_ovly: frame buffer device was loaded to /dev/fb1 <OLPC DCON panel >.
[ 0.325264] pxa168fb_gfx_init_platform_driver
[ 0.330010] pxa168fb_probe: 1
[ 0.334543] pxa168fb_gfx_probe: HDMI isr_clear_mask not been initialized!
[ 0.334550] MMIO start 0xd420b000, size 4096
[ 0.343607] --share--FB DMA buffer phy addr : 20000000
[ 0.348069] fb1: sclk_src 0 clk_get_rate = 400000000
[ 0.352495] pxa168fb_init_modes
[ 0.356200] pxa168fb: set_screen for fbi 1
[ 0.359876] surface: xres 1200 xres_z 960 yres 900 yres_z 720
left 160 top 0
[ 0.367266] pxa168fb: frame buffer device was loaded to /dev/fb2 <HDMI>.
[ 0.367339] pxa688_hdmi_init_platform_driver
[ 0.375664] ++++++++++++ hdmi_hpd_work state 4000 hdmi_state 0
[ 0.376356] ---------FBoverlay DMA buffer phy addr : 21600000
[ 0.383695] pxa168fb: set_screen for fbi 1
[ 0.388297] surface: xres 1200 xres_z 960 yres 900 yres_z 720
left 160 top 0
[ 0.395863] pxa168fb_ovly: frame buffer device was loaded to /dev/fb3 <HDMI - overlay>.
[ 0.395956] mmp-tdma c0ffd800.adma: initialized
[ 0.404169] pxa2xx-uart.1: ttyS2 at MMIO 0xd4017000 (irq = 28) is a UART3
[ 1.045396] console [ttyS2] enabled
[ 1.060119]
[galcore] GC Version: GC Ver0.8.4609p8
[ 1.074386]
contiguousBase:00000000, contiguousSize:03200000
[ 1.089325] galcore options:
[ 1.096108] irqLine = 73
[ 1.096117] registerMemBase = 0xD420D000
[ 1.111710] registerMemSize = 0x00001000
[ 1.119850] irqLine2D = 75
[ 1.127269] registerMemBase2D = 0xD420F000
[ 1.135341] registerMemSize2D = 0x00001000
[ 1.143309] contiguousSize = 52428800
[ 1.151039] contiguousBase = 0x00000000
[ 1.158836] bankSize = 0x02000000
[ 1.166581] fastClear = -1
[ 1.166586] compression = -1
[ 1.180323] signal = 48
[ 1.187125] baseAddress = 0x00000000
[ 1.194572] physSize = 0x40000000
[ 1.201928] logFileSize = 0 KB
[ 1.208903] coreClock = 533
[ 1.215883] [galcore] Print out 3D chip informations:
[ 1.224029] chipModel = 0x00002000
[ 1.224036] chipRevision = 0x00005026
[ 1.239480] chipFeatures = 0xE0286CAD
[ 1.247116] chipMinorFeatures = 0xC3799EFF
[ 1.254690] chipMinorFeatures1 = 0x2E13B2D9
[ 1.262168] chipMinorFeatures2 = 0x02000000
[ 1.269569] chipMinorFeatures3 = 0x00000000
[ 1.276911] chipMinorFeatures4 = 0x00000000
[ 1.284140] gcChipSpecs = 0xa4408a64
[ 1.284140] gcChipSpecs2 = 0x00000000
[ 1.298380] gcChipSpecs3 = 0x00000000
[ 1.305298] streamCount = 4
[ 1.311344] registerMax = 64
[ 1.317384] threadCount = 1024
[ 1.317393] shaderCoreCount = 4
[ 1.329495] vertexCacheSize = 8
[ 1.335356] vertexOutputBufferSize = 1024
[ 1.341446] pixelPipes = 2
[ 1.347218] instructionCount = 256
[ 1.347225] numConstants = 0
[ 1.358920] bufferSize = 0
[ 1.364692] varyingsCount = 8
[ 1.371471] [galcore] Print out 2D chip informations:
[ 1.378585] chipModel = 0x00000300
[ 1.385223] chipRevision = 0x00004634
[ 1.385231] chipFeatures = 0xE02C7ECA
[ 1.398421] chipMinorFeatures = 0xE1399FFF
[ 1.405053] chipMinorFeatures1 = 0x2E13B219
[ 1.405053] chipMinorFeatures2 = 0x00010000
[ 1.418217] chipMinorFeatures3 = 0x00000000
[ 1.424792] chipMinorFeatures4 = 0x00000000
[ 1.424799] gcChipSpecs = 0x92108864
[ 1.437872] gcChipSpecs2 = 0x00000000
[ 1.444384] gcChipSpecs3 = 0x00000000
[ 1.450862] streamCount = 4
[ 1.456524] registerMax = 64
[ 1.462200] threadCount = 256
[ 1.467981] shaderCoreCount = 1
[ 1.467988] vertexCacheSize = 8
[ 1.479211] vertexOutputBufferSize = 512
[ 1.484999] pixelPipes = 1
[ 1.485006] instructionCount = 256
[ 1.496488] numConstants = 0
[ 1.502201] bufferSize = 0
[ 1.507912] varyingsCount = 8
[ 1.515021] gpu_probe: No irq.
[ 1.523325] brd: module loaded
[ 1.543810] lis3lv02d: 8 bits 3DC sensor found
[ 1.633671] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0
[ 1.644294] OLPC XO-1.75 Embedded Controller driver probed
[ 1.652307] input: Power Button as /devices/d4037000.ec-spi/input/input1
[ 1.683931] input: OLPC OLS notify as /devices/0.ols/input/input2
[ 1.692358] OLPC Outdoor Light Sensor driver probed
[ 1.699677] OLPC XO-1.75 lid and ebook switches
[ 1.706577] input: OLPC lid switch as /devices/virtual/input/input3
[ 1.715487] input: OLPC ebook switch as /devices/virtual/input/input4
[ 1.724704] usbcore: registered new interface driver ipheth
[ 1.733954] [1] internal addr[0xe1380000],addr[0x21380000] size[524288]
[ 1.746362] [2] internal addr[0xe1340000],addr[0x21340000] size[65536]
[ 1.757943] [3] internal addr[0xe133a000],addr[0x2133a000] size[4096]
[ 1.769614] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.778857] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 1.779004] pxau2o-ehci d4208000.usb: pxa9xx ehci
[ 1.786588] pxau2o-ehci d4208000.usb: new USB bus registered, assigned bus number 1
[ 1.797110] pxa9xx_u2o_host_enable: PORTSC 0xc001800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
[ 1.797408] pxau2o-ehci d4208000.usb: park 0
[ 1.799520] pxau2o-ehci d4208000.usb: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.799520] pxau2o-ehci d4208000.usb: irq 44, io mem 0xd4208000
[ 1.808444] pxau2o-ehci d4208000.usb: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 1.823692] pxau2o-ehci d4208000.usb: USB 2.0 started, EHCI 1.00
[ 1.823692] usb usb1: default language 0x0409
[ 1.832758] usb usb1: udev 1, busnum 1, minor = 0
[ 1.832793] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.842683] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.853040] usb usb1: Product: pxa9xx ehci
[ 1.860314] usb usb1: Manufacturer: Linux 3.5.7_xo4-20130705.0203.olpc.e77de3d ehci_hcd
[ 1.871689] usb usb1: SerialNumber: d4208000.usb
[ 1.879829] usb usb1: usb_probe_device
[ 1.880014] usb usb1: configuration #1 chosen from 1 choice
[ 1.880026] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.880055] hub 1-0:1.0: usb_probe_interface
[ 1.880141] hub 1-0:1.0: usb_probe_interface - got id
[ 1.880151] hub 1-0:1.0: USB hub found
[ 1.887340] hub 1-0:1.0: 1 port detected
[ 1.894702] hub 1-0:1.0: standalone hub
[ 1.894721] hub 1-0:1.0: individual port power switching
[ 1.894729] hub 1-0:1.0: individual port over-current protection
[ 1.894729] hub 1-0:1.0: Single TT
[ 1.894736] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.894745] hub 1-0:1.0: power on to power good time: 20ms
[ 1.894753] hub 1-0:1.0: local power source is good
[ 1.894770] hub 1-0:1.0: enabling power on all ports
[ 1.894927] mmp3_usb_phy_init_internal: Init usb phy!!!
[ 1.904915] Initializing USB Mass Storage driver...
[ 1.904915] usbcore: registered new interface driver usb-storage
[ 1.923041] USB Mass Storage support registered.
[ 1.931388] usbcore: registered new interface driver libusual
[ 1.940865] usbcore: registered new interface driver mdc800
[ 1.950178] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[ 1.961677] usbcore: registered new interface driver usbserial
[ 1.971526] usbcore: registered new interface driver usbserial_generic
[ 1.982244] USB Serial support registered for generic
[ 1.991359] usbserial: USB Serial Driver core
[ 1.999729] pxau2o-ehci d4208000.usb: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.999744] hub 1-0:1.0: port 1: status 0101 change 0001
[ 2.000052] OLPC SP keyboard/touchpad driver probed
[ 2.009596] sa1100-rtc d4010000.wakeup-rtc: rtc core: registered d4010000.wakeup-rtc as rtc0
[ 2.022618] rtc_idt1338 4-0068: rtc core: registered rtc_idt1338 as rtc1
[ 2.093700] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 2.093700] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 2.121476] input: AT Translated Set 2 keyboard as /devices/d4290000.ap-sp/serio0/input/input5
[ 2.213690] usb 1-1: new high-speed USB device number 2 using pxau2o-ehci
[ 2.374783] usb 1-1: default language 0x0409
[ 2.375173] usb 1-1: udev 2, busnum 1, minor = 1
[ 2.375184] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.386053] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.397334] usb 1-1: Product: USB2.0 Hub
[ 2.405420] usb 1-1: usb_probe_device
[ 2.405570] usb 1-1: configuration #1 chosen from 1 choice
[ 2.405782] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 2.405901] hub 1-1:1.0: usb_probe_interface
[ 2.405901] hub 1-1:1.0: usb_probe_interface - got id
[ 2.405912] hub 1-1:1.0: USB hub found
[ 2.414049] hub 1-1:1.0: 4 ports detected
[ 2.422004] hub 1-1:1.0: standalone hub
[ 2.422012] hub 1-1:1.0: ganged power switching
[ 2.422012] hub 1-1:1.0: global over-current protection
[ 2.422020] hub 1-1:1.0: Single TT
[ 2.422027] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 2.422036] hub 1-1:1.0: Port indicators are supported
[ 2.422043] hub 1-1:1.0: power on to power good time: 100ms
[ 2.422407] hub 1-1:1.0: local power source is good
[ 2.422421] hub 1-1:1.0: no over-current condition exists
[ 2.422430] hub 1-1:1.0: enabling power on all ports
[ 2.424025] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 2.425494] mmp3_thermal: setting thermal watchdog to 100.5C
[ 2.465816] sdhci: Secure Digital Host Controller Interface driver
[ 2.476149] sdhci: Copyright(c) Pierre Ossman
[ 2.484851] Registered led device: mmc0::
[ 2.523709] mmc0: SDHCI controller on d4280800.sdhci [d4280800.sdhci] using ADMA
[ 2.536188] usb 1-1: link qh256-0001/ec3ac240 start 1 [1/0 us]
[ 2.536217] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 2.553709] mmc0: done resetting wlan
[ 2.561647] Registered led device: mmc1::
[ 2.580624] mmc0: new high speed SDIO card at address 0001
[ 2.593685] mmc1: SDHCI controller on d4281000.sdhci [d4281000.sdhci] using ADMA
[ 2.605677] Registered led device: mmc2::
[ 2.643693] mmc2: SDHCI controller on d4280000.sdhci [d4280000.sdhci] using ADMA
[ 2.655413] Registered led device: mmc3::
[ 2.693684] mmc3: SDHCI controller on d4217000.sdhci [d4217000.sdhci] using ADMA
[ 2.705287] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.715176] Registered led device: storage-led
[ 2.715492] usbcore: registered new interface driver usbhid
[ 2.725074] usbhid: USB HID core driver
[ 2.725091] olpc-dcon: Discovered DCON version 2
[ 2.745886] i2c-core: driver [olpc_dcon] using legacy suspend method
[ 2.756307] i2c-core: driver [olpc_dcon] using legacy resume method
[ 2.767817] usbcore: registered new interface driver snd-usb-audio
[ 2.778512] mmp_pcm_probe
[ 2.788662] mmc1: new high speed DDR MMC card at address 0001
[ 2.799391] mmcblk0: mmc1:0001 SEM08G 7.39 GiB
[ 2.808157] mmcblk0boot0: mmc1:0001 SEM08G partition 1 2.00 MiB
[ 2.818247] mmcblk0boot1: mmc1:0001 SEM08G partition 2 2.00 MiB
[ 2.829168] mmcblk0: p1 p2
[ 2.838918] mmcblk0boot1: unknown partition table
[ 2.849185] mmcblk0boot0: unknown partition table
[ 2.876926] asoc: rt5631-hifi <-> c0ffdc00.audio mapping ok
[ 2.887590] input: OLPC XO-1.75 Headphone Jack as /devices/0.audio-complex/sound/card0/input6
[ 2.900348] input: OLPC XO-1.75 Mic Jack as /devices/0.audio-complex/sound/card0/input7
[ 2.913171] TCP: bic registered
[ 2.923333] Initializing XFRM netlink socket
[ 2.932617] NET: Registered protocol family 10
[ 2.940704] NET: Registered protocol family 17
[ 2.950157] lib80211: common routines for IEEE802.11 drivers
[ 2.959426] lib80211_crypt: registered algorithm 'NULL'
[ 2.959457] Key type dns_resolver registered
[ 2.967346] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
[ 2.983199] ThumbEE CPU extension supported.
[ 2.991204] Registering SWP/SWPB emulation handler
[ 3.000706] PJ4 iWMMXt coprocessor enabled.
[ 3.009589] rtc_idt1338 4-0068: setting system clock to 2013-08-18 12:57:40 UTC (1376830660)
[ 3.023535] ALSA device list:
[ 3.034839] #0: OLPC XO-1.75
[ 3.041650] Freeing init memory: 244K
[ 3.079200] tmpfs: No value for mount option 'strictatime'
[ 3.115701] tmpfs: No value for mount option 'strictatime'
[ 3.145071] tmpfs: No value for mount option 'strictatime'
[ 3.196073] dracut: dracut-18 (Spherical Cow) dracut-024-25.git20130205.fc18
[ 3.237446] systemd-udevd[83]: starting version 201
[ 4.660863] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 4.672345] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 4.855185] EXT4-fs (mmcblk0p2): recovery complete
[ 4.868265] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.898710] dracut: Remounting /dev/disk/mmc/mmc1p2 with -o
[ 4.909444] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.942475] dracut: Mounted root filesystem /dev/disk/mmc/mmc1p2
[ 4.960131] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.975075] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[ 4.988889] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[ 5.014812] Dsize 15515648 Psize 15376384 Pstart 139264 Pend 15515648
[ 5.043746] hub 1-1:1.0: hub_suspend
[ 5.043746] usb 1-1: unlink qh256-0001/ec3ac240 start 1 [1/0 us]
[ 5.044163] usb 1-1: usb auto-suspend, wakeup 1
[ 5.270944] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 5.743088] dcon_freeze_store: 0
[ 5.746639] dcon_source_switch to CPU
[ 5.788952] olpc-dcon: The CPU has control
[ 5.826521] dracut: Switching root
[ 5.949555] systemd[1]: systemd 201 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 5.965402] systemd[1]: Set hostname to <xo-d1-c9-59.localdomain>.
[ 6.126336] systemd[1]: Started Replay Read-Ahead Data.
[ 6.131546] systemd[1]: Expecting device dev-ttyS2.device...
[ 6.137443] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 6.145305] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.152832] systemd[1]: Starting Remote File Systems.
[ 6.157896] systemd[1]: Reached target Remote File Systems.
[ 6.163581] systemd[1]: Starting Syslog Socket.
[ 6.168353] systemd[1]: Listening on Syslog Socket.
[ 6.173205] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 6.179864] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.186969] systemd[1]: Starting Delayed Shutdown Socket.
[ 6.192366] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.198228] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.207762] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 6.215833] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.223764] systemd[1]: Starting Paths.
[ 6.227606] systemd[1]: Reached target Paths.
[ 6.232059] systemd[1]: Starting Encrypted Volumes.
[ 6.237065] systemd[1]: Reached target Encrypted Volumes.
[ 6.242483] systemd[1]: Starting Journal Socket.
[ 6.247189] systemd[1]: Listening on Journal Socket.
[ 6.253524] systemd[1]: Started Set Up Additional Binary Formats.
[ 6.259733] systemd[1]: Mounted Huge Pages File System.
[ 6.265066] systemd[1]: Starting Setup Virtual Console...
[ 6.285667] systemd[1]: Started Load Kernel Modules.
[ 6.290979] systemd[1]: Mounting Debug File System...
[ 6.312430] systemd[1]: Mounted Configuration File System.
[ 6.318760] systemd[1]: Starting Journal Service...
[ 6.326456] systemd[1]: Started Journal Service.
[ 6.417791] systemd[1]: Starting Apply Kernel Variables...
[ 6.429568] systemd[1]: Mounted FUSE Control File System.
[ 6.435656] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.450041] systemd[1]: Starting udev Kernel Socket.
[ 6.458216] systemd[1]: Listening on udev Kernel Socket.
[ 6.467552] systemd[1]: Starting udev Control Socket.
[ 6.472937] systemd[1]: Listening on udev Control Socket.
[ 6.483827] systemd[1]: Starting udev Coldplug all Devices...
[ 6.491280] systemd[1]: Starting udev Kernel Device Manager...
[ 6.522792] systemd[1]: Starting Swap.
[ 6.539081] systemd[1]: Reached target Swap.
[ 6.543604] systemd[1]: Started File System Check on Root Device.
[ 6.563760] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.575362] systemd-udevd[210]: starting version 201
[ 6.581711] systemd[1]: Started Setup Virtual Console.
[ 6.595492] systemd[1]: Started udev Kernel Device Manager.
[ 6.620506] systemd[1]: Mounted Debug File System.
[ 6.635629] systemd[1]: Started Apply Kernel Variables.
[ 6.659679] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.753879] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 7.063793] hub 1-0:1.0: hub_suspend
[ 7.063793] usb usb1: bus auto-suspend, wakeup 1
[ 7.063823] pxau2o-ehci d4208000.usb: suspend root hub
[ 7.579934] siv120d 0-0033: chip found @ 0x66 (i2c-gpio-1)
[ 7.794873] usbcore: registered new interface driver sisusb
[ 7.811250] got GPIOs power=150 reset=102
[ 7.827421] usbcore: registered new interface driver udlfb
[ 7.875293] zforce: found zForce firmware 0.0.0.10
[ 7.884021] usbcore: deregistering interface driver sisusb
[ 7.899465] usbcore: deregistering interface driver udlfb
[ 7.917449] zforce: running in multitouch mode
[ 7.917479] input: zForce touchscreen as /devices/d4033000.i2c/i2c-5/5-0050/input/input8
[ 8.011188] runin-check: noop
[ 8.151832] psmouse serio1: sentelic: Finger Sensing Pad, hw: 13.2.6, sn: 0, sw: 1.1.0-K
[ 8.491002] input: FSPPS/2 Sentelic FingerSensingPad as /devices/d4290000.ap-sp/serio1/input/input9
[ 8.719973] dcon_freeze_store: 1
[ 8.723582] dcon_source_switch to DCON
[ 8.733310] Bluetooth: Core ver 2.16
[ 8.775042] olpc-dcon: The DCON has control
[ 8.849737] pxa168fb: set_screen for fbi 0
[ 8.914302] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 8.933823] NET: Registered protocol family 31
[ 8.946311] Bluetooth: HCI device and connection manager initialized
[ 9.229638] siv120d 0-0033: reset...
[ 9.257784] Bluetooth: HCI socket layer initialized
[ 9.368015] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 9.398717] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 9.408395] input: olpc-kbdshim virtual keyboard as /devices/virtual/input/input10
[ 9.434236] Bluetooth: L2CAP socket layer initialized
[ 9.439268] Bluetooth: SCO socket layer initialized
[ 9.452997] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 9.463763] input: olpc-kbdshim virtual mouse as /devices/virtual/input/input11
[ 9.475256] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 9.484229] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 9.490028] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 9.526085] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 9.564381] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 9.597910] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 9.647164] Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2
[ 9.664826] pxa168fb_open GFX layer, fbi 0 opened 2 times ----
[ 9.731199] pxa168fb: set_screen for fbi 0
[ 9.771229] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.105235] mousedev: PS/2 mouse device common for all mice
[ 10.202348] input: olpc-kbdshim virtual touchscreen as /devices/virtual/input/input12
[ 10.958764] siv120d 0-0033: reset...
[ 12.637762] fuse init (API version 7.19)
[ 12.663850] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
[ 12.670792] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[ 12.776354] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (14.66.9.p96)
[ 12.864480] systemd-udevd[228]: renamed network interface mlan0 to eth0
[ 14.341417] dcon_freeze_store: 0
[ 14.345124] dcon_source_switch to CPU
[ 14.379889] olpc-dcon: The CPU has control
[ 104.112705] pxau2o-ehci d4208000.usb: port 1 remote wakeup
[ 104.112705] usb usb1: usb wakeup-resume
[ 104.112749] usb usb1: usb auto-resume
[ 104.112749] pxau2o-ehci d4208000.usb: resume root hub
[ 104.143689] hub 1-0:1.0: hub_resume
[ 104.143723] pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
[ 104.143723] hub 1-0:1.0: port 1: status 0503 change 0004
[ 104.143770] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 104.143786] pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
[ 104.163703] usb 1-1: usb wakeup-resume
[ 104.163703] usb 1-1: finish resume
[ 104.164173] hub 1-1:1.0: hub_resume
[ 104.164908] hub 1-1:1.0: port 2: status 0101 change 0001
[ 104.273670] pxau2o-ehci d4208000.usb: reused qh ec3ac240 schedule
[ 104.273696] usb 1-1: link qh256-0001/ec3ac240 start 1 [1/0 us]
[ 104.273712] hub 1-0:1.0: resume on port 1, status 0
[ 104.273747] hub 1-0:1.0: port 1, status 0503, change 0004, 480 Mb/s
[ 104.273761] hub 1-1:1.0: state 7 ports 4 chg 0004 evt 0000
[ 104.274160] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 104.353970] usb 1-1.2: new high-speed USB device number 3 using pxau2o-ehci
[ 104.694033] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
[ 104.805658] usb 1-1.2: default language 0x0409
[ 104.807408] usb 1-1.2: udev 3, busnum 1, minor = 2
[ 104.807436] usb 1-1.2: New USB device found, idVendor=090c, idProduct=1000
[ 104.815077] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 104.815077] usb 1-1.2: Product: USB DISK
[ 104.826739] usb 1-1.2: Manufacturer: SMI Corporation
[ 104.826753] usb 1-1.2: SerialNumber: AA04012700007502
[ 104.840795] usb 1-1.2: usb_probe_device
[ 104.840863] usb 1-1.2: configuration #1 chosen from 1 choice
[ 104.841092] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[ 104.841502] usb-storage 1-1.2:1.0: usb_probe_interface
[ 104.841528] usb-storage 1-1.2:1.0: usb_probe_interface - got id
[ 104.841682] scsi0 : usb-storage 1-1.2:1.0
[ 104.851947] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0004
[ 105.845199] scsi 0:0:0:0: Direct-Access FLASH Drive SM_USB20 1100 PQ: 0 ANSI: 0 CCS
[ 105.859188] sd 0:0:0:0: [sda] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 105.868830] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 105.878585] sd 0:0:0:0: [sda] Write Protect is off
[ 105.883372] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 105.889737] sd 0:0:0:0: [sda] No Caching mode page present
[ 105.896403] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 105.906804] sd 0:0:0:0: [sda] No Caching mode page present
[ 105.906821] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 105.920846] sda: sda1
[ 105.929463] sd 0:0:0:0: [sda] No Caching mode page present
[ 105.935784] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 105.941880] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 143.648425] olpc-ec-1.75: got event 04
[ 329.458144] olpc-ec-1.75: got event 04
[ 420.425977] sda: detected capacity change from 2004877312 to 0
[ 426.283759] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0004
[ 426.284407] hub 1-1:1.0: port 2, status 0100, change 0001, 12 Mb/s
[ 426.284782] usb 1-1.2: USB disconnect, device number 3
[ 426.284799] usb 1-1.2: unregistering device
[ 426.289902] usb 1-1.2: unregistering interface 1-1.2:1.0
[ 426.297662] usb 1-1.2: usb_disable_device nuking all URBs
[ 426.454044] hub 1-1:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
[ 429.003674] hub 1-1:1.0: hub_suspend
[ 429.003702] usb 1-1: unlink qh256-0001/ec3ac240 start 1 [1/0 us]
[ 429.004162] usb 1-1: usb auto-suspend, wakeup 1
[ 431.023673] hub 1-0:1.0: hub_suspend
[ 431.023701] usb usb1: bus auto-suspend, wakeup 1
[ 431.023731] pxau2o-ehci d4208000.usb: suspend root hub
[ 539.613664] olpc-ec-1.75: got event 04
[ 761.479296] pxa168fb: set_screen for fbi 0
[ 761.557745] pxa168fb: set_screen for fbi 0
[ 761.635346] Process 384 released:
[ 761.670140] -- VidMem: used bytes 23216 KB, max bytes 32076 KB, total bytes 299233 KB
[ 761.714618] -- NonPaged Mem: used bytes 0 KB, max bytes 0 KB, total bytes 0 KB
[ 761.733853] -- Contiguous Mem: used bytes 51712 KB, max bytes 51712 KB, total bytes 51712 KB
[ 761.753108] -- MapUserMemory: used bytes 0 KB, max bytes 0 KB, total bytes 0 KB
[ 761.772399] -- MapMemory: used bytes 51200 KB, max bytes 153600 KB, total bytes 153600 KB
[ 761.792007] [384]Marvell Technology Group Ltd(GC Ver0.8.4609p8)
idle register: [3D][0x00][idle], [2D][0x00][idle]
clock register: [0x00]
clock rate: [0] MHz
Total reserved video mem: 51200 KB
- used video mem: 0 KB
- contiguousPaged: 0 KB
- virtualPaged: 0 KB
- contiguousNonPaged: 0 KB
Video memory usage in details:
- Index: 0 KB
- Vertex: 0 KB
- Texture: 0 KB
- RenderTarget: 0 KB
- Depth: 0 KB
- Bitmap: 0 KB
- TileStatus: 0 KB
- Image: 0 KB
- Mask: 0 KB
- Scissor: 0 KB
- HierarchicalDepth: 0 KB
- Others: 0 KB
- Sum: 0 KB
[ 761.974200] pxa168fb_release GFX layer, fbi 0 opened 3 times ----
[ 762.004069] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 762.372210] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 762.378634] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 762.386418] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 762.386484] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 762.406323] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 762.406350] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 762.426436] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 762.432277] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 762.446548] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 762.453428] pxa168fb_open GFX layer, fbi 0 opened 2 times ----
[ 762.473844] pxa168fb: set_screen for fbi 0
[ 773.314632] dcon_freeze_store: 0
[ 790.079073] olpc-ec-1.75: got event 04
[ 804.622803] hdmi_hpd_handler
[ 804.622803] hdmi_hpd_handler
[ 804.623153] hdmi_hpd_handler
[ 804.623685] hdmi_hpd_handler
[ 804.867565] hdmi_hpd_handler
[ 805.863683] work_launch
[ 805.863697] ++++++++++++ hdmi_hpd_work state 4000 hdmi_state 0
[ 834.990532] mwifiex_sdio mmc0:0001:1: assoc: requested bss not found in scan results
[ 835.082506] netlink: 12 bytes leftover after parsing attributes.
[ 835.098691] netlink: 12 bytes leftover after parsing attributes.
[ 835.110551] netlink: 12 bytes leftover after parsing attributes.
[ 973.443124] PM: Syncing filesystems ... done.
[ 973.451165] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 973.473706] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 973.493697] Suspending console(s) (use no_console_suspend to debug)
[ 973.502949] usb usb1: usb auto-resume
[ 973.502978] pxau2o-ehci d4208000.usb: resume root hub
[ 973.503799] dcon_source_switch to DCON
[ 973.531922] olpc-dcon: missed loading, retrying
[ 973.533671] hub 1-0:1.0: hub_resume
[ 973.533685] hub 1-0:1.0: port 1: status 0507 change 0000
[ 973.533711] usb 1-1: usb auto-resume
[ 973.573670] pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
[ 973.593673] usb 1-1: finish resume
[ 973.594171] hub 1-1:1.0: hub_resume
[ 973.595157] pxau2o-ehci d4208000.usb: reused qh ec3ac240 schedule
[ 973.595178] usb 1-1: link qh256-0001/ec3ac240 start 1 [1/0 us]
[ 973.595188] hub 1-1:1.0: hub_suspend
[ 973.595203] usb 1-1: unlink qh256-0001/ec3ac240 start 1 [1/0 us]
[ 973.595294] usb 1-1: usb suspend, wakeup 0
[ 973.613707] hub 1-0:1.0: hub_suspend
[ 973.613718] usb usb1: bus suspend, wakeup 0
[ 973.613718] pxau2o-ehci d4208000.usb: suspend root hub
[ 973.613766] olpc-dcon: The DCON has control
[ 973.614612] mmp3_usb_phy_deinit_internal: Deinit usb phy!!!
[ 973.614678] mmc2: dropping power over suspend
[ 973.615773] mmc1: dropping power over suspend
[ 973.619147] mmc0: keeping power over suspend
[ 973.619177] sdhci_wakeup_irq
[ 973.619177] sdhci_wakeup_irq
[ 973.619181] sdhci_wakeup_irq
[ 973.619181] sdhci_wakeup_irq
[ 973.619203] [galcore] enter gpu_suspend
[ 973.619203] [galcore] exit gpu_suspend, return 0
[ 973.619293] PM: suspend of devices complete after 116.519 msecs
[ 973.633683] olpc_ec_1_75_suspend: suspend sync 00000001
[ 973.653693] PM: late suspend of devices complete after 34.397 msecs
[ 973.653972] PM: noirq suspend of devices complete after 0.001 msecs
[ 973.654059] mmp3_pm_enter_d2
[ 973.654091] before suspend
[ 973.654091] after resume
[ 973.696082] PM: noirq resume of devices complete after 0.100 msecs
[ 973.715123] PM: early resume of devices complete after 18.833 msecs
[ 973.715249] [galcore] enter gpu_resume
[ 973.720267] [galcore] exit gpu_resume, return 0
[ 973.720284] sdhci_wakeup_irq
[ 973.720286] sdhci_wakeup_irq
[ 973.720286] sdhci_wakeup_irq
[ 973.720288] sdhci_wakeup_irq
[ 973.855021] mmp3_usb_phy_init_internal: Init usb phy!!!
[ 973.856201] pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
[ 973.856265] usb usb1: usb resume
[ 973.856282] pxau2o-ehci d4208000.usb: resume root hub after power loss
[ 973.875766] dcon_source_switch to CPU
[ 973.895023] hub 1-0:1.0: hub_resume
[ 973.895038] hub 1-0:1.0: port 1: status 0507 change 0000
[ 973.895121] usb 1-1: usb resume
[ 973.904461] olpc-dcon: The CPU has control
[ 973.955034] usb 1-1: finish reset-resume
[ 974.075020] usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
[ 974.226050] hub 1-1:1.0: hub_reset_resume
[ 974.226057] hub 1-1:1.0: enabling power on all ports
[ 974.336187] usb 1-1: link qh256-0001/ec3ac240 start 2 [1/0 us]
[ 974.336253] PM: resume of devices complete after 621.113 msecs
[ 974.474530] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 974.474553] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 974.465099] Restarting tasks ... done.
More information about the Devel
mailing list