hdmi out (correction)
Barry Vercoe
barry at laptop.org.au
Sun Aug 18 16:08:34 EDT 2013
Jon
Redone file with powersave on attached. In previous my projector had
gone into sleep mode, and full hdmi handshake may not have happened.
This file longer.
-- barry
On 18/08/2013 9:24 p.m., Jon Nettleton wrote:
>
>
> On Aug 18, 2013 10:30 AM, "Barry Vercoe" <barry at laptop.org.au
> <mailto:barry at laptop.org.au>> wrote:
> >
> > Jon, yes the file exists on our system here. Contains just a zero.
>
> Also when HDMI is plugged in? Could you send me a full dmesg output of
> the HDMI handshake with auto power save enabled?
>
> >
> > -- barry
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.laptop.org/pipermail/devel/attachments/20130819/0fc4d7b5/attachment.html>
-------------- next part --------------
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.7_xo4-20130705.0203.olpc.e77de3d (mockbuild at koji3.laptop.org) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 PREEMPT Fri Jul 5 02:20:07 EDT 2013
[ 0.000000] CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: Marvell MMP2 (Device Tree Support), model: 4C2
[ 0.000000] cma: CMA: reserved 256 MiB at 1c000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 260096
[ 0.000000] free_area_init_node: node 0, pgdat c06847a8, node_mem_map c0728000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 193040 pages, LIFO batch:31
[ 0.000000] HighMem zone: 512 pages used for memmap
[ 0.000000] HighMem zone: 65024 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258064
[ 0.000000] Kernel command line: console=ttyS2,115200 console=tty0 selinux=0 fbcon=font:SUN12x22 fb_size=8M coherent_pool=64M
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1016MB = 1016MB total
[ 0.000000] Memory: 754700k/754700k available, 285684k reserved, 262144K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc060f270 (6173 kB)
.init : 0xc0610000 - 0xc064dc9c ( 248 kB)
.data : 0xc064e000 - 0xc068c6d8 ( 250 kB)
.bss : 0xc068c6fc - 0xc0727a0c ( 621 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] sched_clock: 32 bits at 6MHz, resolution 153ns, wraps every 660764ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000069] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 0.040126] pid_max: default: 32768 minimum: 301
[ 0.040172] Mount-cache hash table entries: 512
[ 0.044100] CPU: Testing write buffer coherency: ok
[ 0.044100] ftrace: allocating 16397 entries in 49 pages
[ 0.071290] hw perfevents: no hardware support available
[ 0.071381] Setting up static identity map for 0x45c7a8 - 0x45c800
[ 0.073181] devtmpfs: initialized
[ 0.104571] NET: Registered protocol family 16
[ 0.162054] DMA: preallocated 65536 KiB pool for atomic coherent allocations
[ 0.170397] L310 cache controller enabled
[ 0.170575] l2x0: 8 ways, CACHE_ID 0x880000ed, AUX_CTRL 0x32860000, Cache size: 524288 B
[ 0.170605] mmp3_fabric_ddr_config: 0x00001000, 0x00000000, 0x00000000
[ 0.170605] mmp3_fabric_ddr_config: DDR interleave size 524288 KB
[ 0.170627] mmp3_fabric_ddr_config: DDR Port Priority ff003030, ff003030
[ 0.170770] Dual MC enabled, config 0x20
[ 0.172080] mmp-sram d1030000.asram: initialized
[ 0.175013] mmp-sram d1020000.vsram: initialized
[ 0.175418] OLPC board revision 4C2 (EC api 5)
[ 0.175628] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
[ 0.175653] hw-breakpoint: Debug register access (0xee004e52) caused undefined instruction on CPU 0
[ 0.178888] bio: create slab <bio-0> at 0
[ 0.179443] SCSI subsystem initialized
[ 0.179443] usbcore: registered new interface driver usbfs
[ 0.179591] usbcore: registered new interface driver hub
[ 0.179657] usbcore: registered new device driver usb
[ 0.180212] i2c-gpio 0.camera-i2c: using pins 166 (SDA) and 165 (SCL)
[ 0.180570] i2c-gpio 0.dcon-i2c: using pins 167 (SDA) and 168 (SCL)
[ 0.180932] i2c-gpio 0.hdmi-i2c: using pins 5 (SDA) and 4 (SCL)
[ 0.181386] I2C: i2c-3: PXA I2C adapter
[ 0.181801] I2C: i2c-4: PXA I2C adapter
[ 0.182307] I2C: i2c-5: PXA I2C adapter
[ 0.182638] I2C: i2c-6: PXA I2C adapter
[ 0.182701] Linux video capture interface: v2.00
[ 0.182800] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.183447] cfg80211: Calling CRDA to update world regulatory domain
[ 0.183634] Switching to clocksource clocksource
[ 0.196701] NET: Registered protocol family 2
[ 0.196861] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.197067] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.197468] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.198898] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.198919] TCP: reno registered
[ 0.198919] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.198936] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.199125] NET: Registered protocol family 1
[ 0.199278] Trying to unpack rootfs image as initramfs...
[ 0.233842] Freeing initrd memory: 6604K
[ 0.236656] highmem bounce pool size: 64 pages
[ 0.237034] VFS: Disk quotas dquot_6.5.2
[ 0.237034] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.237515] msgmni has been set to 1486
[ 0.238095] io scheduler noop registered
[ 0.238114] io scheduler deadline registered
[ 0.238134] io scheduler cfq registered (default)
[ 0.238180] pxa168fb_gfx_init_platform_driver
[ 0.238421] pxa168fb_probe: 0
[ 0.238440] pxa168fb_gfx_probe: OLPC DCON panel isr_clear_mask not been initialized!
[ 0.238454] MMIO start 0xd420b000, size 4096
[ 0.259632] ---------FB DMA buffer phy addr : 20000000
[ 0.263837] fb0: sclk_src 0 clk_get_rate = 400000000
[ 0.272427] pxa168fb_init_modes
[ 0.272474] pxa168fb: set_screen for fbi 0
[ 0.272723] pxa168fb_open GFX layer, fbi 0 opened 0 times ----
[ 0.272827] pxa168fb: set_screen for fbi 0
[ 0.293826] Console: switching to colour frame buffer device 100x40
[ 0.313827] pxa168fb: frame buffer device was loaded to /dev/fb0 <OLPC DCON panel>.
[ 0.315797] ---------FBoverlay DMA buffer phy addr : 21400000
[ 0.319488] pxa168fb: set_screen for fbi 0
[ 0.320860] pxa168fb_ovly: frame buffer device was loaded to /dev/fb1 <OLPC DCON panel >.
[ 0.325104] pxa168fb_gfx_init_platform_driver
[ 0.329755] pxa168fb_probe: 1
[ 0.334307] pxa168fb_gfx_probe: HDMI isr_clear_mask not been initialized!
[ 0.338901] MMIO start 0xd420b000, size 4096
[ 0.338901] --share--FB DMA buffer phy addr : 20000000
[ 0.347851] fb1: sclk_src 0 clk_get_rate = 400000000
[ 0.352281] pxa168fb_init_modes
[ 0.355971] pxa168fb: set_screen for fbi 1
[ 0.355988] surface: xres 1200 xres_z 960 yres 900 yres_z 720
left 160 top 0
[ 0.367053] pxa168fb: frame buffer device was loaded to /dev/fb2 <HDMI>.
[ 0.367126] pxa688_hdmi_init_platform_driver
[ 0.375444] ++++++++++++ hdmi_hpd_work state 4000 hdmi_state 0
[ 0.379541] ---------FBoverlay DMA buffer phy addr : 21600000
[ 0.383849] pxa168fb: set_screen for fbi 1
[ 0.384315] surface: xres 1200 xres_z 960 yres 900 yres_z 720
left 160 top 0
[ 0.395635] pxa168fb_ovly: frame buffer device was loaded to /dev/fb3 <HDMI - overlay>.
[ 0.399891] mmp-tdma c0ffd800.adma: initialized
[ 0.403939] pxa2xx-uart.1: ttyS2 at MMIO 0xd4017000 (irq = 28) is a UART3
[ 1.045198] console [ttyS2] enabled
[ 1.059735]
[galcore] GC Version: GC Ver0.8.4609p8
[ 1.074169]
contiguousBase:00000000, contiguousSize:03200000
[ 1.089087] galcore options:
[ 1.095897] irqLine = 73
[ 1.095907] registerMemBase = 0xD420D000
[ 1.111473] registerMemSize = 0x00001000
[ 1.119583] irqLine2D = 75
[ 1.126975] registerMemBase2D = 0xD420F000
[ 1.135019] registerMemSize2D = 0x00001000
[ 1.135028] contiguousSize = 52428800
[ 1.150689] contiguousBase = 0x00000000
[ 1.158473] bankSize = 0x02000000
[ 1.166201] fastClear = -1
[ 1.166207] compression = -1
[ 1.179925] signal = 48
[ 1.186719] baseAddress = 0x00000000
[ 1.194166] physSize = 0x40000000
[ 1.201505] logFileSize = 0 KB
[ 1.208468] coreClock = 533
[ 1.215454] [galcore] Print out 3D chip informations:
[ 1.215487] chipModel = 0x00002000
[ 1.231342] chipRevision = 0x00005026
[ 1.239037] chipFeatures = 0xE0286CAD
[ 1.246684] chipMinorFeatures = 0xC3799EFF
[ 1.254258] chipMinorFeatures1 = 0x2E13B2D9
[ 1.254269] chipMinorFeatures2 = 0x02000000
[ 1.269133] chipMinorFeatures3 = 0x00000000
[ 1.276470] chipMinorFeatures4 = 0x00000000
[ 1.283682] gcChipSpecs = 0xa4408a64
[ 1.290868] gcChipSpecs2 = 0x00000000
[ 1.297950] gcChipSpecs3 = 0x00000000
[ 1.304875] streamCount = 4
[ 1.304883] registerMax = 64
[ 1.316989] threadCount = 1024
[ 1.316989] shaderCoreCount = 4
[ 1.329101] vertexCacheSize = 8
[ 1.334975] vertexOutputBufferSize = 1024
[ 1.341067] pixelPipes = 2
[ 1.346849] instructionCount = 256
[ 1.352801] numConstants = 0
[ 1.358583] bufferSize = 0
[ 1.364354] varyingsCount = 8
[ 1.371140] [galcore] Print out 2D chip informations:
[ 1.378264] chipModel = 0x00000300
[ 1.384912] chipRevision = 0x00004634
[ 1.391519] chipFeatures = 0xE02C7ECA
[ 1.398134] chipMinorFeatures = 0xE1399FFF
[ 1.404787] chipMinorFeatures1 = 0x2E13B219
[ 1.404795] chipMinorFeatures2 = 0x00010000
[ 1.418013] chipMinorFeatures3 = 0x00000000
[ 1.424602] chipMinorFeatures4 = 0x00000000
[ 1.424609] gcChipSpecs = 0x92108864
[ 1.437716] gcChipSpecs2 = 0x00000000
[ 1.444260] gcChipSpecs3 = 0x00000000
[ 1.444260] streamCount = 4
[ 1.456402] registerMax = 64
[ 1.456412] threadCount = 256
[ 1.467886] shaderCoreCount = 1
[ 1.473494] vertexCacheSize = 8
[ 1.479122] vertexOutputBufferSize = 512
[ 1.484920] pixelPipes = 1
[ 1.490578] instructionCount = 256
[ 1.496446] numConstants = 0
[ 1.496456] bufferSize = 0
[ 1.507866] varyingsCount = 8
[ 1.514843] gpu_probe: No irq.
[ 1.523400] brd: module loaded
[ 1.543965] lis3lv02d: 8 bits 3DC sensor found
[ 1.633823] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0
[ 1.644441] OLPC XO-1.75 Embedded Controller driver probed
[ 1.644548] input: Power Button as /devices/d4037000.ec-spi/input/input1
[ 1.683828] input: OLPC OLS notify as /devices/0.ols/input/input2
[ 1.692512] OLPC Outdoor Light Sensor driver probed
[ 1.699721] OLPC XO-1.75 lid and ebook switches
[ 1.706705] input: OLPC lid switch as /devices/virtual/input/input3
[ 1.715598] input: OLPC ebook switch as /devices/virtual/input/input4
[ 1.724806] usbcore: registered new interface driver ipheth
[ 1.734052] [1] internal addr[0xe1380000],addr[0x21380000] size[524288]
[ 1.746555] [2] internal addr[0xe1340000],addr[0x21340000] size[65536]
[ 1.758113] [3] internal addr[0xe133a000],addr[0x2133a000] size[4096]
[ 1.769776] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.779003] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 1.779150] pxau2o-ehci d4208000.usb: pxa9xx ehci
[ 1.786717] pxau2o-ehci d4208000.usb: new USB bus registered, assigned bus number 1
[ 1.797219] pxa9xx_u2o_host_enable: PORTSC 0xc001800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
[ 1.799606] pxau2o-ehci d4208000.usb: park 0
[ 1.799606] pxau2o-ehci d4208000.usb: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.799630] pxau2o-ehci d4208000.usb: irq 44, io mem 0xd4208000
[ 1.808529] pxau2o-ehci d4208000.usb: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 1.823834] pxau2o-ehci d4208000.usb: USB 2.0 started, EHCI 1.00
[ 1.823843] usb usb1: default language 0x0409
[ 1.832885] usb usb1: udev 1, busnum 1, minor = 0
[ 1.832910] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.842778] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.853124] usb usb1: Product: pxa9xx ehci
[ 1.860377] usb usb1: Manufacturer: Linux 3.5.7_xo4-20130705.0203.olpc.e77de3d ehci_hcd
[ 1.871741] usb usb1: SerialNumber: d4208000.usb
[ 1.879891] usb usb1: usb_probe_device
[ 1.880088] usb usb1: configuration #1 chosen from 1 choice
[ 1.880116] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.880203] hub 1-0:1.0: usb_probe_interface
[ 1.880203] hub 1-0:1.0: usb_probe_interface - got id
[ 1.880213] hub 1-0:1.0: USB hub found
[ 1.887421] hub 1-0:1.0: 1 port detected
[ 1.894762] hub 1-0:1.0: standalone hub
[ 1.894782] hub 1-0:1.0: individual port power switching
[ 1.894782] hub 1-0:1.0: individual port over-current protection
[ 1.894790] hub 1-0:1.0: Single TT
[ 1.894806] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.894814] hub 1-0:1.0: power on to power good time: 20ms
[ 1.894830] hub 1-0:1.0: local power source is good
[ 1.894830] hub 1-0:1.0: enabling power on all ports
[ 1.894988] mmp3_usb_phy_init_internal: Init usb phy!!!
[ 1.904851] Initializing USB Mass Storage driver...
[ 1.913457] usbcore: registered new interface driver usb-storage
[ 1.923102] USB Mass Storage support registered.
[ 1.931368] usbcore: registered new interface driver libusual
[ 1.940916] usbcore: registered new interface driver mdc800
[ 1.950238] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[ 1.961841] usbcore: registered new interface driver usbserial
[ 1.971619] usbcore: registered new interface driver usbserial_generic
[ 1.982362] USB Serial support registered for generic
[ 1.991494] usbserial: USB Serial Driver core
[ 1.999868] pxau2o-ehci d4208000.usb: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.999883] hub 1-0:1.0: port 1: status 0101 change 0001
[ 2.000193] OLPC SP keyboard/touchpad driver probed
[ 2.009751] sa1100-rtc d4010000.wakeup-rtc: rtc core: registered d4010000.wakeup-rtc as rtc0
[ 2.022733] rtc_idt1338 4-0068: rtc core: registered rtc_idt1338 as rtc1
[ 2.093838] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 2.093856] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 2.121507] input: AT Translated Set 2 keyboard as /devices/d4290000.ap-sp/serio0/input/input5
[ 2.213843] usb 1-1: new high-speed USB device number 2 using pxau2o-ehci
[ 2.374892] usb 1-1: default language 0x0409
[ 2.375268] usb 1-1: udev 2, busnum 1, minor = 1
[ 2.375283] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.386180] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.397489] usb 1-1: Product: USB2.0 Hub
[ 2.405707] usb 1-1: usb_probe_device
[ 2.405719] usb 1-1: configuration #1 chosen from 1 choice
[ 2.406017] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 2.406150] hub 1-1:1.0: usb_probe_interface
[ 2.406160] hub 1-1:1.0: usb_probe_interface - got id
[ 2.406171] hub 1-1:1.0: USB hub found
[ 2.414284] hub 1-1:1.0: 4 ports detected
[ 2.422252] hub 1-1:1.0: standalone hub
[ 2.422252] hub 1-1:1.0: ganged power switching
[ 2.422261] hub 1-1:1.0: global over-current protection
[ 2.422269] hub 1-1:1.0: Single TT
[ 2.422276] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 2.422292] hub 1-1:1.0: Port indicators are supported
[ 2.422299] hub 1-1:1.0: power on to power good time: 100ms
[ 2.422767] hub 1-1:1.0: local power source is good
[ 2.422780] hub 1-1:1.0: no over-current condition exists
[ 2.422790] hub 1-1:1.0: enabling power on all ports
[ 2.424010] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 2.426314] mmp3_thermal: setting thermal watchdog to 100.5C
[ 2.465971] sdhci: Secure Digital Host Controller Interface driver
[ 2.476318] sdhci: Copyright(c) Pierre Ossman
[ 2.484772] Registered led device: mmc0::
[ 2.523857] mmc0: SDHCI controller on d4280800.sdhci [d4280800.sdhci] using ADMA
[ 2.536265] usb 1-1: link qh256-0001/ec3ab240 start 1 [1/0 us]
[ 2.536323] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 2.553827] mmc0: done resetting wlan
[ 2.561646] Registered led device: mmc1::
[ 2.580788] mmc0: new high speed SDIO card at address 0001
[ 2.593844] mmc1: SDHCI controller on d4281000.sdhci [d4281000.sdhci] using ADMA
[ 2.605719] Registered led device: mmc2::
[ 2.643841] mmc2: SDHCI controller on d4280000.sdhci [d4280000.sdhci] using ADMA
[ 2.655561] Registered led device: mmc3::
[ 2.693832] mmc3: SDHCI controller on d4217000.sdhci [d4217000.sdhci] using ADMA
[ 2.705608] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.715480] Registered led device: storage-led
[ 2.715480] usbcore: registered new interface driver usbhid
[ 2.725247] usbhid: USB HID core driver
[ 2.733645] olpc-dcon: Discovered DCON version 2
[ 2.744349] i2c-core: driver [olpc_dcon] using legacy suspend method
[ 2.756574] i2c-core: driver [olpc_dcon] using legacy resume method
[ 2.768240] usbcore: registered new interface driver snd-usb-audio
[ 2.779106] mmp_pcm_probe
[ 2.786287] mmc1: new high speed DDR MMC card at address 0001
[ 2.797111] mmcblk0: mmc1:0001 SEM08G 7.39 GiB
[ 2.805907] mmcblk0boot0: mmc1:0001 SEM08G partition 1 2.00 MiB
[ 2.816072] mmcblk0boot1: mmc1:0001 SEM08G partition 2 2.00 MiB
[ 2.826940] mmcblk0: p1 p2
[ 2.836740] mmcblk0boot1: unknown partition table
[ 2.847001] mmcblk0boot0: unknown partition table
[ 2.907180] asoc: rt5631-hifi <-> c0ffdc00.audio mapping ok
[ 2.921435] input: OLPC XO-1.75 Headphone Jack as /devices/0.audio-complex/sound/card0/input6
[ 2.934941] input: OLPC XO-1.75 Mic Jack as /devices/0.audio-complex/sound/card0/input7
[ 2.947286] TCP: bic registered
[ 2.954654] Initializing XFRM netlink socket
[ 2.965888] NET: Registered protocol family 10
[ 2.975255] NET: Registered protocol family 17
[ 2.975741] lib80211: common routines for IEEE802.11 drivers
[ 2.993004] lib80211_crypt: registered algorithm 'NULL'
[ 2.993047] Key type dns_resolver registered
[ 3.001893] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
[ 3.013487] ThumbEE CPU extension supported.
[ 3.021518] Registering SWP/SWPB emulation handler
[ 3.034583] PJ4 iWMMXt coprocessor enabled.
[ 3.044339] rtc_idt1338 4-0068: setting system clock to 2013-08-18 19:41:01 UTC (1376854861)
[ 3.060351] ALSA device list:
[ 3.067225] #0: OLPC XO-1.75
[ 3.074286] Freeing init memory: 244K
[ 3.109232] tmpfs: No value for mount option 'strictatime'
[ 3.146000] tmpfs: No value for mount option 'strictatime'
[ 3.174305] tmpfs: No value for mount option 'strictatime'
[ 3.223883] dracut: dracut-18 (Spherical Cow) dracut-024-25.git20130205.fc18
[ 3.266367] systemd-udevd[83]: starting version 201
[ 4.688011] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.720611] dracut: Remounting /dev/disk/mmc/mmc1p2 with -o
[ 4.732510] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.764435] dracut: Mounted root filesystem /dev/disk/mmc/mmc1p2
[ 4.782939] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.797867] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[ 4.811724] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[ 4.838319] Dsize 15515648 Psize 15376384 Pstart 139264 Pend 15515648
[ 5.043853] hub 1-1:1.0: hub_suspend
[ 5.043894] usb 1-1: unlink qh256-0001/ec3ab240 start 1 [1/0 us]
[ 5.044399] usb 1-1: usb auto-suspend, wakeup 1
[ 5.101366] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 5.573449] dcon_freeze_store: 0
[ 5.576999] dcon_source_switch to CPU
[ 5.608459] olpc-dcon: The CPU has control
[ 5.655090] dracut: Switching root
[ 5.778613] systemd[1]: systemd 201 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 5.794403] systemd[1]: Set hostname to <xo-d1-c9-59.localdomain>.
[ 5.956266] systemd[1]: Started Replay Read-Ahead Data.
[ 5.961490] systemd[1]: Expecting device dev-ttyS2.device...
[ 5.967377] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.975178] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.982762] systemd[1]: Starting Remote File Systems.
[ 5.987829] systemd[1]: Reached target Remote File Systems.
[ 5.993506] systemd[1]: Starting Syslog Socket.
[ 5.998152] systemd[1]: Listening on Syslog Socket.
[ 6.003134] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 6.009795] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.016896] systemd[1]: Starting Delayed Shutdown Socket.
[ 6.022421] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.028161] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.037677] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 6.045760] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.053669] systemd[1]: Starting Paths.
[ 6.057526] systemd[1]: Reached target Paths.
[ 6.061979] systemd[1]: Starting Encrypted Volumes.
[ 6.066901] systemd[1]: Reached target Encrypted Volumes.
[ 6.072404] systemd[1]: Starting Journal Socket.
[ 6.077147] systemd[1]: Listening on Journal Socket.
[ 6.083618] systemd[1]: Started Set Up Additional Binary Formats.
[ 6.089709] systemd[1]: Mounted Huge Pages File System.
[ 6.094991] systemd[1]: Starting Setup Virtual Console...
[ 6.110759] systemd[1]: Started Load Kernel Modules.
[ 6.116287] systemd[1]: Mounting Debug File System...
[ 6.122661] systemd[1]: Mounted Configuration File System.
[ 6.129921] systemd[1]: Starting Journal Service...
[ 6.139955] systemd[1]: Started Journal Service.
[ 6.270477] systemd[1]: Starting Apply Kernel Variables...
[ 6.285456] systemd[1]: Mounted FUSE Control File System.
[ 6.290843] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.318313] systemd[1]: Starting udev Kernel Socket.
[ 6.323602] systemd[1]: Listening on udev Kernel Socket.
[ 6.343909] systemd[1]: Starting udev Control Socket.
[ 6.349308] systemd[1]: Listening on udev Control Socket.
[ 6.367285] systemd[1]: Starting udev Coldplug all Devices...
[ 6.384553] systemd[1]: Starting udev Kernel Device Manager...
[ 6.392115] systemd[1]: Starting Swap.
[ 6.414122] systemd[1]: Reached target Swap.
[ 6.418393] systemd[1]: Started File System Check on Root Device.
[ 6.434015] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.454112] systemd[1]: Started Setup Virtual Console.
[ 6.460267] systemd-udevd[209]: starting version 201
[ 6.467550] systemd[1]: Started udev Kernel Device Manager.
[ 6.479201] systemd[1]: Mounted Debug File System.
[ 6.497867] systemd[1]: Started Apply Kernel Variables.
[ 6.516035] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.550044] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 6.587943] systemd[1]: Started Remount Root and Kernel File Systems.
[ 6.615174] systemd[1]: Started Import network configuration from initramfs.
[ 6.622264] systemd[1]: Starting Configure read-only root support...
[ 6.651268] systemd[1]: Starting Local File Systems (Pre).
[ 6.658927] systemd[1]: Reached target Local File Systems (Pre).
[ 6.666709] systemd[1]: Mounting /var/log...
[ 6.672793] systemd[1]: var-log.mount: Directory /var/log to mount over is not empty, mounting anyway.
[ 6.685024] systemd[1]: Mounting /var/tmp...
[ 6.693265] systemd[1]: Mounting /tmp...
[ 7.064002] hub 1-0:1.0: hub_suspend
[ 7.064093] usb usb1: bus auto-suspend, wakeup 1
[ 7.064093] pxau2o-ehci d4208000.usb: suspend root hub
[ 7.384113] siv120d 0-0033: chip found @ 0x66 (i2c-gpio-1)
[ 7.528799] got GPIOs power=150 reset=102
[ 7.605190] zforce: found zForce firmware 0.0.0.10
[ 7.641933] zforce: running in multitouch mode
[ 7.723566] input: zForce touchscreen as /devices/d4033000.i2c/i2c-5/5-0050/input/input8
[ 7.849232] psmouse serio1: sentelic: Finger Sensing Pad, hw: 13.2.6, sn: 0, sw: 1.1.0-K
[ 7.870136] usbcore: registered new interface driver sisusb
[ 7.908585] usbcore: registered new interface driver udlfb
[ 7.938886] Bluetooth: Core ver 2.16
[ 7.960521] usbcore: deregistering interface driver sisusb
[ 7.992788] usbcore: deregistering interface driver udlfb
[ 8.003194] NET: Registered protocol family 31
[ 8.074230] runin-check: noop
[ 8.084710] Bluetooth: HCI device and connection manager initialized
[ 8.101438] Bluetooth: HCI socket layer initialized
[ 8.112734] siv120d 0-0033: reset...
[ 8.122199] Bluetooth: L2CAP socket layer initialized
[ 8.214403] Bluetooth: SCO socket layer initialized
[ 8.236360] input: FSPPS/2 Sentelic FingerSensingPad as /devices/d4290000.ap-sp/serio1/input/input9
[ 8.600019] Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2
[ 8.840434] dcon_freeze_store: 1
[ 8.845492] dcon_source_switch to DCON
[ 8.875551] olpc-dcon: The DCON has control
[ 9.165091] mousedev: PS/2 mouse device common for all mice
[ 9.447358] input: olpc-kbdshim virtual keyboard as /devices/virtual/input/input10
[ 9.482878] input: olpc-kbdshim virtual mouse as /devices/virtual/input/input11
[ 9.524515] input: olpc-kbdshim virtual touchscreen as /devices/virtual/input/input12
[ 9.640327] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.833885] siv120d 0-0033: reset...
[ 11.393898] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
[ 11.400853] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[ 11.500089] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (14.66.9.p96)
[ 11.544568] pxa168fb: set_screen for fbi 0
[ 11.589076] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 11.604526] systemd-udevd[228]: renamed network interface mlan0 to eth0
[ 11.882180] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 11.888572] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 11.896178] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 11.902474] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 11.909221] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 11.915696] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 11.922844] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 11.929480] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 11.936307] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 11.943670] pxa168fb_open GFX layer, fbi 0 opened 2 times ----
[ 12.020056] pxa168fb: set_screen for fbi 0
[ 13.343398] fuse init (API version 7.19)
[ 14.832998] dcon_freeze_store: 0
[ 14.844476] dcon_source_switch to CPU
[ 14.880380] olpc-dcon: The CPU has control
[ 111.138368] PM: Syncing filesystems ... done.
[ 111.144803] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 111.163872] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 111.183854] Suspending console(s) (use no_console_suspend to debug)
[ 111.193336] usb usb1: usb auto-resume
[ 111.193336] pxau2o-ehci d4208000.usb: resume root hub
[ 111.194113] dcon_source_switch to DCON
[ 111.223838] hub 1-0:1.0: hub_resume
[ 111.223865] hub 1-0:1.0: port 1: status 0507 change 0000
[ 111.223887] usb 1-1: usb auto-resume
[ 111.224726] olpc-dcon: The DCON has control
[ 111.263825] pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
[ 111.283840] usb 1-1: finish resume
[ 111.284266] hub 1-1:1.0: hub_resume
[ 111.285267] pxau2o-ehci d4208000.usb: reused qh ec3ab240 schedule
[ 111.285288] usb 1-1: link qh256-0001/ec3ab240 start 1 [1/0 us]
[ 111.285311] hub 1-1:1.0: hub_suspend
[ 111.285326] usb 1-1: unlink qh256-0001/ec3ab240 start 1 [1/0 us]
[ 111.285404] usb 1-1: usb suspend, wakeup 0
[ 111.303858] hub 1-0:1.0: hub_suspend
[ 111.303870] usb usb1: bus suspend, wakeup 0
[ 111.303870] pxau2o-ehci d4208000.usb: suspend root hub
[ 111.303890] mmp3_usb_phy_deinit_internal: Deinit usb phy!!!
[ 111.303955] mmc2: dropping power over suspend
[ 111.303990] mmc1: dropping power over suspend
[ 112.672277] mmc0: keeping power over suspend
[ 112.672277] sdhci_wakeup_irq
[ 112.672288] sdhci_wakeup_irq
[ 112.672290] sdhci_wakeup_irq
[ 112.672292] sdhci_wakeup_irq
[ 112.672294] [galcore] enter gpu_suspend
[ 112.672315] [galcore] exit gpu_suspend, return 0
[ 112.672399] PM: suspend of devices complete after 1479.525 msecs
[ 112.693827] olpc_ec_1_75_suspend: suspend sync 00000001
[ 112.713856] PM: late suspend of devices complete after 41.427 msecs
[ 112.714120] PM: noirq suspend of devices complete after 0.001 msecs
[ 112.714212] mmp3_pm_enter_d2
[ 112.714231] before suspend
[ 112.714244] after resume
[ 112.755339] PM: noirq resume of devices complete after 0.101 msecs
[ 112.774370] PM: early resume of devices complete after 18.803 msecs
[ 112.774524] [galcore] enter gpu_resume
[ 112.778684] [galcore] exit gpu_resume, return 0
[ 112.778741] sdhci_wakeup_irq
[ 112.778741] sdhci_wakeup_irq
[ 112.778743] sdhci_wakeup_irq
[ 112.778745] sdhci_wakeup_irq
[ 112.914255] mmp3_usb_phy_init_internal: Init usb phy!!!
[ 112.915451] pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
[ 112.915516] usb usb1: usb resume
[ 112.915534] pxau2o-ehci d4208000.usb: resume root hub after power loss
[ 112.935037] dcon_source_switch to CPU
[ 112.954263] hub 1-0:1.0: hub_resume
[ 112.954304] hub 1-0:1.0: port 1: status 0507 change 0000
[ 112.954340] usb 1-1: usb resume
[ 112.969173] olpc-dcon: The CPU has control
[ 112.994292] pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
[ 113.014276] usb 1-1: finish reset-resume
[ 113.134255] usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
[ 113.285269] hub 1-1:1.0: hub_reset_resume
[ 113.285286] hub 1-1:1.0: enabling power on all ports
[ 113.395421] usb 1-1: link qh256-0001/ec3ab240 start 2 [1/0 us]
[ 113.395482] PM: resume of devices complete after 621.097 msecs
[ 113.529737] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 113.529798] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 113.526052] Restarting tasks ... done.
[ 116.084263] hub 1-1:1.0: hub_suspend
[ 116.084323] usb 1-1: unlink qh256-0001/ec3ab240 start 2 [1/0 us]
[ 116.084772] usb 1-1: usb auto-suspend, wakeup 1
[ 118.104261] hub 1-0:1.0: hub_suspend
[ 118.104295] usb usb1: bus auto-suspend, wakeup 1
[ 118.104324] pxau2o-ehci d4208000.usb: suspend root hub
[ 126.912207] olpc-ec-1.75: got event 04
[ 153.120000] pxa168fb: set_screen for fbi 0
[ 153.238730] pxa168fb: set_screen for fbi 0
[ 153.349820] Process 529 released:
[ 153.376326] -- VidMem: used bytes 25336 KB, max bytes 32076 KB, total bytes 131449 KB
[ 153.414658] -- NonPaged Mem: used bytes 0 KB, max bytes 0 KB, total bytes 0 KB
[ 153.433817] -- Contiguous Mem: used bytes 51712 KB, max bytes 51712 KB, total bytes 51712 KB
[ 153.453189] -- MapUserMemory: used bytes 0 KB, max bytes 0 KB, total bytes 0 KB
[ 153.472816] -- MapMemory: used bytes 51200 KB, max bytes 153600 KB, total bytes 153600 KB
[ 153.492548] [529]Marvell Technology Group Ltd(GC Ver0.8.4609p8)
idle register: [3D][0x00][idle], [2D][0x00][idle]
clock register: [0x00]
clock rate: [0] MHz
Total reserved video mem: 51200 KB
- used video mem: 0 KB
- contiguousPaged: 0 KB
- virtualPaged: 0 KB
- contiguousNonPaged: 0 KB
Video memory usage in details:
- Index: 0 KB
- Vertex: 0 KB
- Texture: 0 KB
- RenderTarget: 0 KB
- Depth: 0 KB
- Bitmap: 0 KB
- TileStatus: 0 KB
- Image: 0 KB
- Mask: 0 KB
- Scissor: 0 KB
- HierarchicalDepth: 0 KB
- Others: 0 KB
- Sum: 0 KB
[ 153.674440] pxa168fb_release GFX layer, fbi 0 opened 3 times ----
[ 153.707273] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 153.983631] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 153.990004] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 154.009170] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 154.015317] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 154.029078] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 154.035147] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 154.049190] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 154.055309] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 154.069376] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 154.076716] pxa168fb_open GFX layer, fbi 0 opened 2 times ----
[ 154.096519] pxa168fb: set_screen for fbi 0
[ 226.450365] mwifiex_sdio mmc0:0001:1: assoc: requested bss not found in scan results
[ 226.548048] netlink: 12 bytes leftover after parsing attributes.
[ 226.559482] netlink: 12 bytes leftover after parsing attributes.
[ 226.572167] netlink: 12 bytes leftover after parsing attributes.
[ 292.194281] pxau2o-ehci d4208000.usb: port 1 remote wakeup
[ 292.194304] usb usb1: usb wakeup-resume
[ 292.194353] usb usb1: usb auto-resume
[ 292.194363] pxau2o-ehci d4208000.usb: resume root hub
[ 292.234274] hub 1-0:1.0: hub_resume
[ 292.234274] pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
[ 292.234307] hub 1-0:1.0: port 1: status 0503 change 0004
[ 292.234350] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 292.234367] pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
[ 292.254278] usb 1-1: usb wakeup-resume
[ 292.254308] usb 1-1: finish resume
[ 292.254768] hub 1-1:1.0: hub_resume
[ 292.255768] pxau2o-ehci d4208000.usb: reused qh ec3ab240 schedule
[ 292.255791] usb 1-1: link qh256-0001/ec3ab240 start 2 [1/0 us]
[ 292.255804] hub 1-0:1.0: resume on port 1, status 0
[ 292.255827] hub 1-0:1.0: port 1, status 0503, change 0004, 480 Mb/s
[ 292.255854] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 292.386460] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0001
[ 292.386895] hub 1-1:1.0: over-current change
[ 292.894280] hub 1-1:1.0: enabling power on all ports
[ 294.456139] PM: Syncing filesystems ... done.
[ 294.465277] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 294.484301] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 294.506881] Suspending console(s) (use no_console_suspend to debug)
[ 294.513540] hub 1-1:1.0: hub_suspend
[ 294.513585] usb 1-1: unlink qh256-0001/ec3ab240 start 2 [1/0 us]
[ 294.513585] usb 1-1: usb suspend, wakeup 0
[ 294.514455] dcon_source_switch to DCON
[ 294.524278] hub 1-0:1.0: hub_suspend
[ 294.524306] usb usb1: bus suspend, wakeup 0
[ 294.524306] pxau2o-ehci d4208000.usb: suspend root hub
[ 294.550051] olpc-dcon: The DCON has control
[ 294.550443] mmp3_usb_phy_deinit_internal: Deinit usb phy!!!
[ 294.550443] mmc2: dropping power over suspend
[ 294.551539] mmc1: dropping power over suspend
[ 294.555082] mmc0: keeping power over suspend
[ 294.555110] sdhci_wakeup_irq
[ 294.555110] sdhci_wakeup_irq
[ 294.555113] sdhci_wakeup_irq
[ 294.555115] sdhci_wakeup_irq
[ 294.555116] [galcore] enter gpu_suspend
[ 294.555157] [galcore] exit gpu_suspend, return 0
[ 294.555218] PM: suspend of devices complete after 41.858 msecs
[ 294.574270] olpc_ec_1_75_suspend: suspend sync 00000002
[ 294.594280] PM: late suspend of devices complete after 39.052 msecs
[ 294.594550] PM: noirq suspend of devices complete after 0.001 msecs
[ 294.594642] mmp3_pm_enter_d2
[ 294.594662] before suspend
[ 294.594674] after resume
[ 294.636374] PM: noirq resume of devices complete after 0.101 msecs
[ 294.655388] PM: early resume of devices complete after 18.892 msecs
[ 294.655500] [galcore] enter gpu_resume
[ 294.660118] [galcore] exit gpu_resume, return 0
[ 294.660118] sdhci_wakeup_irq
[ 294.660135] sdhci_wakeup_irq
[ 294.660135] sdhci_wakeup_irq
[ 294.660137] sdhci_wakeup_irq
[ 294.795309] mmp3_usb_phy_init_internal: Init usb phy!!!
[ 294.796464] pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
[ 294.796529] usb usb1: usb resume
[ 294.796546] pxau2o-ehci d4208000.usb: resume root hub after power loss
[ 294.816023] dcon_source_switch to CPU
[ 294.835288] hub 1-0:1.0: hub_resume
[ 294.835302] hub 1-0:1.0: port 1: status 0507 change 0000
[ 294.835383] usb 1-1: usb resume
[ 294.848002] olpc-dcon: The CPU has control
[ 294.895297] usb 1-1: finish reset-resume
[ 295.015278] usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
[ 295.166422] hub 1-1:1.0: hub_reset_resume
[ 295.166439] hub 1-1:1.0: enabling power on all ports
[ 295.276421] usb 1-1: link qh256-0001/ec3ab240 start 3 [1/0 us]
[ 295.276519] PM: resume of devices complete after 621.124 msecs
[ 295.410236] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 295.410258] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 295.406577] Restarting tasks ... done.
[ 296.636081] olpc-ec-1.75: got event 04
[ 298.135287] hub 1-1:1.0: hub_suspend
[ 298.135319] usb 1-1: unlink qh256-0001/ec3ab240 start 3 [1/0 us]
[ 298.135800] usb 1-1: usb auto-suspend, wakeup 1
[ 300.155287] hub 1-0:1.0: hub_suspend
[ 300.155316] usb usb1: bus auto-suspend, wakeup 1
[ 300.155355] pxau2o-ehci d4208000.usb: suspend root hub
[ 315.644380] PM: Syncing filesystems ... done.
[ 315.652312] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 315.677940] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 315.695309] Suspending console(s) (use no_console_suspend to debug)
[ 315.704589] usb usb1: usb auto-resume
[ 315.704598] pxau2o-ehci d4208000.usb: resume root hub
[ 315.705347] dcon_source_switch to DCON
[ 315.730812] olpc-dcon: missed loading, retrying
[ 315.735284] hub 1-0:1.0: hub_resume
[ 315.735299] hub 1-0:1.0: port 1: status 0507 change 0000
[ 315.735326] usb 1-1: usb auto-resume
[ 315.775281] pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
[ 315.795280] usb 1-1: finish resume
[ 315.795796] hub 1-1:1.0: hub_resume
[ 315.796796] pxau2o-ehci d4208000.usb: reused qh ec3ab240 schedule
[ 315.796826] usb 1-1: link qh256-0001/ec3ab240 start 3 [1/0 us]
[ 315.796826] hub 1-1:1.0: hub_suspend
[ 315.796856] usb 1-1: unlink qh256-0001/ec3ab240 start 3 [1/0 us]
[ 315.796933] usb 1-1: usb suspend, wakeup 0
[ 315.810363] olpc-dcon: The DCON has control
[ 315.815323] hub 1-0:1.0: hub_suspend
[ 315.815336] usb usb1: bus suspend, wakeup 0
[ 315.815336] pxau2o-ehci d4208000.usb: suspend root hub
[ 315.815408] mmp3_usb_phy_deinit_internal: Deinit usb phy!!!
[ 315.815471] mmc2: dropping power over suspend
[ 315.816522] mmc1: dropping power over suspend
[ 315.820190] mmc0: keeping power over suspend
[ 315.820190] sdhci_wakeup_irq
[ 315.820203] sdhci_wakeup_irq
[ 315.820203] sdhci_wakeup_irq
[ 315.820205] sdhci_wakeup_irq
[ 315.820207] [galcore] enter gpu_suspend
[ 315.820227] [galcore] exit gpu_suspend, return 0
[ 315.820310] PM: suspend of devices complete after 122.344 msecs
[ 315.835286] olpc_ec_1_75_suspend: suspend sync 00000003
[ 315.855311] PM: late suspend of devices complete after 34.965 msecs
[ 315.855582] PM: noirq suspend of devices complete after 0.001 msecs
[ 315.855669] mmp3_pm_enter_d2
[ 315.855689] before suspend
[ 315.855701] after resume
[ 315.897117] PM: noirq resume of devices complete after 0.100 msecs
[ 315.916056] PM: early resume of devices complete after 18.735 msecs
[ 315.916169] [galcore] enter gpu_resume
[ 315.920742] [galcore] exit gpu_resume, return 0
[ 315.920742] sdhci_wakeup_irq
[ 315.920759] sdhci_wakeup_irq
[ 315.920759] sdhci_wakeup_irq
[ 315.920761] sdhci_wakeup_irq
[ 316.055944] mmp3_usb_phy_init_internal: Init usb phy!!!
[ 316.057124] pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
[ 316.057206] usb usb1: usb resume
[ 316.057206] pxau2o-ehci d4208000.usb: resume root hub after power loss
[ 316.076689] dcon_source_switch to CPU
[ 316.095950] hub 1-0:1.0: hub_resume
[ 316.095965] hub 1-0:1.0: port 1: status 0507 change 0000
[ 316.096024] usb 1-1: usb resume
[ 316.099368] olpc-dcon: The CPU has control
[ 316.135944] pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
[ 316.155947] usb 1-1: finish reset-resume
[ 316.275943] usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
[ 316.427082] hub 1-1:1.0: hub_reset_resume
[ 316.427098] hub 1-1:1.0: enabling power on all ports
[ 316.537081] usb 1-1: link qh256-0001/ec3ab240 start 4 [1/0 us]
[ 316.537168] PM: resume of devices complete after 621.108 msecs
[ 316.675485] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 316.675509] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 316.671835] Restarting tasks ... done.
[ 319.125984] hub 1-1:1.0: hub_suspend
[ 319.125984] usb 1-1: unlink qh256-0001/ec3ab240 start 4 [1/0 us]
[ 319.126461] usb 1-1: usb auto-suspend, wakeup 1
[ 321.145952] hub 1-0:1.0: hub_suspend
[ 321.145983] usb usb1: bus auto-suspend, wakeup 1
[ 321.146024] pxau2o-ehci d4208000.usb: suspend root hub
[ 437.049318] PM: Syncing filesystems ... done.
[ 437.057883] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 437.075981] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 437.095973] Suspending console(s) (use no_console_suspend to debug)
[ 437.105231] usb usb1: usb auto-resume
[ 437.105260] pxau2o-ehci d4208000.usb: resume root hub
[ 437.106037] dcon_source_switch to DCON
[ 437.135949] hub 1-0:1.0: hub_resume
[ 437.135964] hub 1-0:1.0: port 1: status 0507 change 0000
[ 437.136014] usb 1-1: usb auto-resume
[ 437.138658] olpc-dcon: The DCON has control
[ 437.175946] pxau2o-ehci d4208000.usb: GetStatus port:1 status 8001205 4 ACK POWER sig=se0 LPM PE CONNECT
[ 437.195944] usb 1-1: finish resume
[ 437.196470] hub 1-1:1.0: hub_resume
[ 437.197477] pxau2o-ehci d4208000.usb: reused qh ec3ab240 schedule
[ 437.197486] usb 1-1: link qh256-0001/ec3ab240 start 4 [1/0 us]
[ 437.197501] hub 1-1:1.0: hub_suspend
[ 437.197501] usb 1-1: unlink qh256-0001/ec3ab240 start 4 [1/0 us]
[ 437.197516] usb 1-1: usb suspend, wakeup 0
[ 437.215970] hub 1-0:1.0: hub_suspend
[ 437.215984] usb usb1: bus suspend, wakeup 0
[ 437.215995] pxau2o-ehci d4208000.usb: suspend root hub
[ 437.216067] mmp3_usb_phy_deinit_internal: Deinit usb phy!!!
[ 437.216095] mmc2: dropping power over suspend
[ 437.216167] mmc1: dropping power over suspend
[ 437.220119] mmc0: keeping power over suspend
[ 437.220148] sdhci_wakeup_irq
[ 437.220148] sdhci_wakeup_irq
[ 437.220152] sdhci_wakeup_irq
[ 437.220152] sdhci_wakeup_irq
[ 437.220154] [galcore] enter gpu_suspend
[ 437.220175] [galcore] exit gpu_suspend, return 0
[ 437.220258] PM: suspend of devices complete after 115.145 msecs
[ 437.235948] olpc_ec_1_75_suspend: suspend sync 00000004
[ 437.255968] PM: late suspend of devices complete after 35.700 msecs
[ 437.256240] PM: noirq suspend of devices complete after 0.266 msecs
[ 437.256353] mmp3_pm_enter_d2
[ 437.256353] before suspend
[ 437.296864] after resume
[ 437.297646] PM: noirq resume of devices complete after 0.745 msecs
[ 437.316581] PM: early resume of devices complete after 18.726 msecs
[ 437.316792] [galcore] enter gpu_resume
[ 437.320845] [galcore] exit gpu_resume, return 0
[ 437.320886] sdhci_wakeup_irq
[ 437.320902] sdhci_wakeup_irq
[ 437.320904] sdhci_wakeup_irq
[ 437.320908] sdhci_wakeup_irq
[ 437.456508] mmp3_usb_phy_init_internal: Init usb phy!!!
[ 437.456508] pxa9xx_u2o_host_enable: PORTSC 0xc000800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
[ 437.457728] usb usb1: usb resume
[ 437.457746] pxau2o-ehci d4208000.usb: resume root hub after power loss
[ 437.477225] dcon_source_switch to CPU
[ 437.496489] hub 1-0:1.0: hub_resume
[ 437.496504] hub 1-0:1.0: port 1: status 0507 change 0000
[ 437.496584] usb 1-1: usb resume
[ 437.500525] olpc-dcon: The CPU has control
[ 437.536512] pxau2o-ehci d4208000.usb: GetStatus port:1 status 00180b 0 ACK POWER sig=j PEC CSC CONNECT
[ 437.556483] usb 1-1: finish reset-resume
[ 437.566088] olpc-ec-1.75: got event 04
[ 437.676524] usb 1-1: reset high-speed USB device number 2 using pxau2o-ehci
[ 437.827497] hub 1-1:1.0: hub_reset_resume
[ 437.827513] hub 1-1:1.0: enabling power on all ports
[ 437.937649] usb 1-1: link qh256-0001/ecf76b00 start 5 [1/0 us]
[ 437.937709] PM: resume of devices complete after 621.117 msecs
[ 438.071542] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 438.071542] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 438.067874] Restarting tasks ... done.
More information about the Devel
mailing list