hdmi out
Barry Vercoe
barry at laptop.org.au
Sun Aug 18 09:09:24 EDT 2013
Jon
new d,esg file attached.
-- barry
On 18/08/2013 9:24 p.m., Jon Nettleton wrote:
>
>
> On Aug 18, 2013 10:30 AM, "Barry Vercoe" <barry at laptop.org.au
> <mailto:barry at laptop.org.au>> wrote:
> >
> > Jon, yes the file exists on our system here. Contains just a zero.
>
> Also when HDMI is plugged in? Could you send me a full dmesg output of
> the HDMI handshake with auto power save enabled?
>
> >
> > -- barry
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.laptop.org/pipermail/devel/attachments/20130819/ff8214ec/attachment.html>
-------------- next part --------------
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.7_xo4-20130705.0203.olpc.e77de3d (mockbuild at koji3.laptop.org) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 PREEMPT Fri Jul 5 02:20:07 EDT 2013
[ 0.000000] CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: Marvell MMP2 (Device Tree Support), model: 4C2
[ 0.000000] cma: CMA: reserved 256 MiB at 1c000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 260096
[ 0.000000] free_area_init_node: node 0, pgdat c06847a8, node_mem_map c0728000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 193040 pages, LIFO batch:31
[ 0.000000] HighMem zone: 512 pages used for memmap
[ 0.000000] HighMem zone: 65024 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258064
[ 0.000000] Kernel command line: console=ttyS2,115200 console=tty0 selinux=0 fbcon=font:SUN12x22 fb_size=8M coherent_pool=64M
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1016MB = 1016MB total
[ 0.000000] Memory: 754700k/754700k available, 285684k reserved, 262144K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc060f270 (6173 kB)
.init : 0xc0610000 - 0xc064dc9c ( 248 kB)
.data : 0xc064e000 - 0xc068c6d8 ( 250 kB)
.bss : 0xc068c6fc - 0xc0727a0c ( 621 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] sched_clock: 32 bits at 6MHz, resolution 153ns, wraps every 660764ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000070] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 0.040123] pid_max: default: 32768 minimum: 301
[ 0.040485] Mount-cache hash table entries: 512
[ 0.040485] CPU: Testing write buffer coherency: ok
[ 0.044097] ftrace: allocating 16397 entries in 49 pages
[ 0.071309] hw perfevents: no hardware support available
[ 0.071380] Setting up static identity map for 0x45c7a8 - 0x45c800
[ 0.073188] devtmpfs: initialized
[ 0.101220] NET: Registered protocol family 16
[ 0.162079] DMA: preallocated 65536 KiB pool for atomic coherent allocations
[ 0.170397] L310 cache controller enabled
[ 0.170550] l2x0: 8 ways, CACHE_ID 0x880000ed, AUX_CTRL 0x32860000, Cache size: 524288 B
[ 0.170574] mmp3_fabric_ddr_config: 0x00001000, 0x00000000, 0x00000000
[ 0.170603] mmp3_fabric_ddr_config: DDR interleave size 524288 KB
[ 0.170625] mmp3_fabric_ddr_config: DDR Port Priority ff003030, ff003030
[ 0.170768] Dual MC enabled, config 0x20
[ 0.172108] mmp-sram d1030000.asram: initialized
[ 0.175009] mmp-sram d1020000.vsram: initialized
[ 0.175412] OLPC board revision 4C2 (EC api 5)
[ 0.175621] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
[ 0.175646] hw-breakpoint: Debug register access (0xee004e52) caused undefined instruction on CPU 0
[ 0.178883] bio: create slab <bio-0> at 0
[ 0.179019] SCSI subsystem initialized
[ 0.179438] usbcore: registered new interface driver usbfs
[ 0.179589] usbcore: registered new interface driver hub
[ 0.179655] usbcore: registered new device driver usb
[ 0.180208] i2c-gpio 0.camera-i2c: using pins 166 (SDA) and 165 (SCL)
[ 0.180569] i2c-gpio 0.dcon-i2c: using pins 167 (SDA) and 168 (SCL)
[ 0.180867] i2c-gpio 0.hdmi-i2c: using pins 5 (SDA) and 4 (SCL)
[ 0.181452] I2C: i2c-3: PXA I2C adapter
[ 0.181798] I2C: i2c-4: PXA I2C adapter
[ 0.182259] I2C: i2c-5: PXA I2C adapter
[ 0.182718] I2C: i2c-6: PXA I2C adapter
[ 0.182718] Linux video capture interface: v2.00
[ 0.182978] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.183467] cfg80211: Calling CRDA to update world regulatory domain
[ 0.183632] Switching to clocksource clocksource
[ 0.196846] NET: Registered protocol family 2
[ 0.197050] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.197050] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.197452] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.198584] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.198882] TCP: reno registered
[ 0.198903] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.198951] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.199109] NET: Registered protocol family 1
[ 0.199109] Trying to unpack rootfs image as initramfs...
[ 0.233970] Freeing initrd memory: 6604K
[ 0.236794] highmem bounce pool size: 64 pages
[ 0.237027] VFS: Disk quotas dquot_6.5.2
[ 0.237081] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.237566] msgmni has been set to 1486
[ 0.238086] io scheduler noop registered
[ 0.238105] io scheduler deadline registered
[ 0.238125] io scheduler cfq registered (default)
[ 0.238171] pxa168fb_gfx_init_platform_driver
[ 0.238412] pxa168fb_probe: 0
[ 0.238431] pxa168fb_gfx_probe: OLPC DCON panel isr_clear_mask not been initialized!
[ 0.238444] MMIO start 0xd420b000, size 4096
[ 0.259618] ---------FB DMA buffer phy addr : 20000000
[ 0.272407] fb0: sclk_src 0 clk_get_rate = 400000000
[ 0.272407] pxa168fb_init_modes
[ 0.272428] pxa168fb: set_screen for fbi 0
[ 0.272590] pxa168fb_open GFX layer, fbi 0 opened 0 times ----
[ 0.272706] pxa168fb: set_screen for fbi 0
[ 0.293803] Console: switching to colour frame buffer device 100x40
[ 0.314418] pxa168fb: frame buffer device was loaded to /dev/fb0 <OLPC DCON panel>.
[ 0.315196] ---------FBoverlay DMA buffer phy addr : 21400000
[ 0.318889] pxa168fb: set_screen for fbi 0
[ 0.320360] pxa168fb_ovly: frame buffer device was loaded to /dev/fb1 <OLPC DCON panel >.
[ 0.324398] pxa168fb_gfx_init_platform_driver
[ 0.324514] pxa168fb_probe: 1
[ 0.329170] pxa168fb_gfx_probe: HDMI isr_clear_mask not been initialized!
[ 0.338301] MMIO start 0xd420b000, size 4096
[ 0.338313] --share--FB DMA buffer phy addr : 20000000
[ 0.347297] fb1: sclk_src 0 clk_get_rate = 400000000
[ 0.351740] pxa168fb_init_modes
[ 0.355447] pxa168fb: set_screen for fbi 1
[ 0.355465] surface: xres 1200 xres_z 960 yres 900 yres_z 720
left 160 top 0
[ 0.366627] pxa168fb: frame buffer device was loaded to /dev/fb2 <HDMI>.
[ 0.366627] pxa688_hdmi_init_platform_driver
[ 0.375087] ++++++++++++ hdmi_hpd_work state 4000 hdmi_state 0
[ 0.375666] ---------FBoverlay DMA buffer phy addr : 21600000
[ 0.383827] pxa168fb: set_screen for fbi 1
[ 0.383850] surface: xres 1200 xres_z 960 yres 900 yres_z 720
left 160 top 0
[ 0.395174] pxa168fb_ovly: frame buffer device was loaded to /dev/fb3 <HDMI - overlay>.
[ 0.395267] mmp-tdma c0ffd800.adma: initialized
[ 0.403589] pxa2xx-uart.1: ttyS2 at MMIO 0xd4017000 (irq = 28) is a UART3
[ 1.051436] console [ttyS2] enabled
[ 1.059423]
[galcore] GC Version: GC Ver0.8.4609p8
[ 1.073663]
contiguousBase:00000000, contiguousSize:03200000
[ 1.088576] galcore options:
[ 1.095350] irqLine = 73
[ 1.102784] registerMemBase = 0xD420D000
[ 1.110919] registerMemSize = 0x00001000
[ 1.119040] irqLine2D = 75
[ 1.126448] registerMemBase2D = 0xD420F000
[ 1.134506] registerMemSize2D = 0x00001000
[ 1.142457] contiguousSize = 52428800
[ 1.150183] contiguousBase = 0x00000000
[ 1.157975] bankSize = 0x02000000
[ 1.165711] fastClear = -1
[ 1.165717] compression = -1
[ 1.179443] signal = 48
[ 1.186243] baseAddress = 0x00000000
[ 1.186248] physSize = 0x40000000
[ 1.201030] logFileSize = 0 KB
[ 1.207988] coreClock = 533
[ 1.214964] [galcore] Print out 3D chip informations:
[ 1.214997] chipModel = 0x00002000
[ 1.230828] chipRevision = 0x00005026
[ 1.238514] chipFeatures = 0xE0286CAD
[ 1.246161] chipMinorFeatures = 0xC3799EFF
[ 1.246161] chipMinorFeatures1 = 0x2E13B2D9
[ 1.261168] chipMinorFeatures2 = 0x02000000
[ 1.268581] chipMinorFeatures3 = 0x00000000
[ 1.275889] chipMinorFeatures4 = 0x00000000
[ 1.275889] gcChipSpecs = 0xa4408a64
[ 1.290247] gcChipSpecs2 = 0x00000000
[ 1.297305] gcChipSpecs3 = 0x00000000
[ 1.304201] streamCount = 4
[ 1.304209] registerMax = 64
[ 1.316259] threadCount = 1024
[ 1.316259] shaderCoreCount = 4
[ 1.328310] vertexCacheSize = 8
[ 1.334158] vertexOutputBufferSize = 1024
[ 1.340224] pixelPipes = 2
[ 1.345988] instructionCount = 256
[ 1.345988] numConstants = 0
[ 1.357638] bufferSize = 0
[ 1.363357] varyingsCount = 8
[ 1.371098] [galcore] Print out 2D chip informations:
[ 1.378181] chipModel = 0x00000300
[ 1.384785] chipRevision = 0x00004634
[ 1.384794] chipFeatures = 0xE02C7ECA
[ 1.397905] chipMinorFeatures = 0xE1399FFF
[ 1.404492] chipMinorFeatures1 = 0x2E13B219
[ 1.411044] chipMinorFeatures2 = 0x00010000
[ 1.417600] chipMinorFeatures3 = 0x00000000
[ 1.424147] chipMinorFeatures4 = 0x00000000
[ 1.424154] gcChipSpecs = 0x92108864
[ 1.437166] gcChipSpecs2 = 0x00000000
[ 1.443661] gcChipSpecs3 = 0x00000000
[ 1.450123] streamCount = 4
[ 1.455755] registerMax = 64
[ 1.455766] threadCount = 256
[ 1.467201] shaderCoreCount = 1
[ 1.472781] vertexCacheSize = 8
[ 1.478367] vertexOutputBufferSize = 512
[ 1.484146] pixelPipes = 1
[ 1.484152] instructionCount = 256
[ 1.495621] numConstants = 0
[ 1.495631] bufferSize = 0
[ 1.506999] varyingsCount = 8
[ 1.515096] gpu_probe: No irq.
[ 1.523385] brd: module loaded
[ 1.543947] lis3lv02d: 8 bits 3DC sensor found
[ 1.633801] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input0
[ 1.644415] OLPC XO-1.75 Embedded Controller driver probed
[ 1.652430] input: Power Button as /devices/d4037000.ec-spi/input/input1
[ 1.683797] input: OLPC OLS notify as /devices/0.ols/input/input2
[ 1.692483] OLPC Outdoor Light Sensor driver probed
[ 1.699786] OLPC XO-1.75 lid and ebook switches
[ 1.706675] input: OLPC lid switch as /devices/virtual/input/input3
[ 1.715583] input: OLPC ebook switch as /devices/virtual/input/input4
[ 1.724809] usbcore: registered new interface driver ipheth
[ 1.734069] [1] internal addr[0xe1380000],addr[0x21380000] size[524288]
[ 1.748694] [2] internal addr[0xe1340000],addr[0x21340000] size[65536]
[ 1.758101] [3] internal addr[0xe133a000],addr[0x2133a000] size[4096]
[ 1.769779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.779039] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 1.779039] pxau2o-ehci d4208000.usb: pxa9xx ehci
[ 1.786745] pxau2o-ehci d4208000.usb: new USB bus registered, assigned bus number 1
[ 1.797294] pxa9xx_u2o_host_enable: PORTSC 0xc001800 USBMODE 0x3 USBSTS 0x1080 USBCMD 0x80b00
[ 1.797565] pxau2o-ehci d4208000.usb: park 0
[ 1.799676] pxau2o-ehci d4208000.usb: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 1.799676] pxau2o-ehci d4208000.usb: irq 44, io mem 0xd4208000
[ 1.808614] pxau2o-ehci d4208000.usb: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 1.823821] pxau2o-ehci d4208000.usb: USB 2.0 started, EHCI 1.00
[ 1.823821] usb usb1: default language 0x0409
[ 1.832903] usb usb1: udev 1, busnum 1, minor = 0
[ 1.832903] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.842797] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.853144] usb usb1: Product: pxa9xx ehci
[ 1.860403] usb usb1: Manufacturer: Linux 3.5.7_xo4-20130705.0203.olpc.e77de3d ehci_hcd
[ 1.871815] usb usb1: SerialNumber: d4208000.usb
[ 1.879925] usb usb1: usb_probe_device
[ 1.880110] usb usb1: configuration #1 chosen from 1 choice
[ 1.880123] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.880238] hub 1-0:1.0: usb_probe_interface
[ 1.880248] hub 1-0:1.0: usb_probe_interface - got id
[ 1.880248] hub 1-0:1.0: USB hub found
[ 1.887436] hub 1-0:1.0: 1 port detected
[ 1.894797] hub 1-0:1.0: standalone hub
[ 1.894816] hub 1-0:1.0: individual port power switching
[ 1.894824] hub 1-0:1.0: individual port over-current protection
[ 1.894831] hub 1-0:1.0: Single TT
[ 1.894831] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.894840] hub 1-0:1.0: power on to power good time: 20ms
[ 1.894848] hub 1-0:1.0: local power source is good
[ 1.894865] hub 1-0:1.0: enabling power on all ports
[ 1.894874] mmp3_usb_phy_init_internal: Init usb phy!!!
[ 1.905011] Initializing USB Mass Storage driver...
[ 1.913503] usbcore: registered new interface driver usb-storage
[ 1.923146] USB Mass Storage support registered.
[ 1.931422] usbcore: registered new interface driver libusual
[ 1.940979] usbcore: registered new interface driver mdc800
[ 1.950309] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[ 1.961913] usbcore: registered new interface driver usbserial
[ 1.971732] usbcore: registered new interface driver usbserial_generic
[ 1.982433] USB Serial support registered for generic
[ 1.991567] usbserial: USB Serial Driver core
[ 1.999920] pxau2o-ehci d4208000.usb: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.999953] hub 1-0:1.0: port 1: status 0101 change 0001
[ 2.000278] OLPC SP keyboard/touchpad driver probed
[ 2.009827] sa1100-rtc d4010000.wakeup-rtc: rtc core: registered d4010000.wakeup-rtc as rtc0
[ 2.022805] rtc_idt1338 4-0068: rtc core: registered rtc_idt1338 as rtc1
[ 2.093813] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 2.093831] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 2.121574] input: AT Translated Set 2 keyboard as /devices/d4290000.ap-sp/serio0/input/input5
[ 2.213802] usb 1-1: new high-speed USB device number 2 using pxau2o-ehci
[ 2.374939] usb 1-1: default language 0x0409
[ 2.375314] usb 1-1: udev 2, busnum 1, minor = 1
[ 2.375330] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 2.386205] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.397523] usb 1-1: Product: USB2.0 Hub
[ 2.405757] usb 1-1: usb_probe_device
[ 2.405757] usb 1-1: configuration #1 chosen from 1 choice
[ 2.406065] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 2.406111] hub 1-1:1.0: usb_probe_interface
[ 2.406184] hub 1-1:1.0: usb_probe_interface - got id
[ 2.406205] hub 1-1:1.0: USB hub found
[ 2.414316] hub 1-1:1.0: 4 ports detected
[ 2.422300] hub 1-1:1.0: standalone hub
[ 2.422318] hub 1-1:1.0: ganged power switching
[ 2.422326] hub 1-1:1.0: global over-current protection
[ 2.422333] hub 1-1:1.0: Single TT
[ 2.422333] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 2.422349] hub 1-1:1.0: Port indicators are supported
[ 2.422356] hub 1-1:1.0: power on to power good time: 100ms
[ 2.422814] hub 1-1:1.0: local power source is good
[ 2.422827] hub 1-1:1.0: no over-current condition exists
[ 2.422837] hub 1-1:1.0: enabling power on all ports
[ 2.424187] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 2.427226] mmp3_thermal: setting thermal watchdog to 100.5C
[ 2.466858] sdhci: Secure Digital Host Controller Interface driver
[ 2.477305] sdhci: Copyright(c) Pierre Ossman
[ 2.486024] Registered led device: mmc0::
[ 2.523841] mmc0: SDHCI controller on d4280800.sdhci [d4280800.sdhci] using ADMA
[ 2.536314] usb 1-1: link qh256-0001/ec3ac240 start 1 [1/0 us]
[ 2.536362] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 2.553830] mmc0: done resetting wlan
[ 2.561803] Registered led device: mmc1::
[ 2.580746] mmc0: new high speed SDIO card at address 0001
[ 2.593812] mmc1: SDHCI controller on d4281000.sdhci [d4281000.sdhci] using ADMA
[ 2.605699] Registered led device: mmc2::
[ 2.643817] mmc2: SDHCI controller on d4280000.sdhci [d4280000.sdhci] using ADMA
[ 2.655408] Registered led device: mmc3::
[ 2.693807] mmc3: SDHCI controller on d4217000.sdhci [d4217000.sdhci] using ADMA
[ 2.705445] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.715474] Registered led device: storage-led
[ 2.715648] usbcore: registered new interface driver usbhid
[ 2.725241] usbhid: USB HID core driver
[ 2.725263] olpc-dcon: Discovered DCON version 2
[ 2.745964] i2c-core: driver [olpc_dcon] using legacy suspend method
[ 2.756416] i2c-core: driver [olpc_dcon] using legacy resume method
[ 2.768064] usbcore: registered new interface driver snd-usb-audio
[ 2.778727] mmp_pcm_probe
[ 2.806890] mmc1: new high speed DDR MMC card at address 0001
[ 2.817634] mmcblk0: mmc1:0001 SEM08G 7.39 GiB
[ 2.826254] mmcblk0boot0: mmc1:0001 SEM08G partition 1 2.00 MiB
[ 2.836365] mmcblk0boot1: mmc1:0001 SEM08G partition 2 2.00 MiB
[ 2.847068] mmcblk0: p1 p2
[ 2.856809] mmcblk0boot1: unknown partition table
[ 2.867238] mmcblk0boot0: unknown partition table
[ 2.878923] asoc: rt5631-hifi <-> c0ffdc00.audio mapping ok
[ 2.893196] input: OLPC XO-1.75 Headphone Jack as /devices/0.audio-complex/sound/card0/input6
[ 2.907092] input: OLPC XO-1.75 Mic Jack as /devices/0.audio-complex/sound/card0/input7
[ 2.919622] TCP: bic registered
[ 2.926646] Initializing XFRM netlink socket
[ 2.939071] NET: Registered protocol family 10
[ 2.947677] NET: Registered protocol family 17
[ 2.956647] lib80211: common routines for IEEE802.11 drivers
[ 2.965883] lib80211_crypt: registered algorithm 'NULL'
[ 2.965900] Key type dns_resolver registered
[ 2.973926] VFP support v0.3: implementor 56 architecture 2 part 20 variant 9 rev 6
[ 2.989683] ThumbEE CPU extension supported.
[ 2.997710] Registering SWP/SWPB emulation handler
[ 3.007313] PJ4 iWMMXt coprocessor enabled.
[ 3.016109] rtc_idt1338 4-0068: setting system clock to 2013-08-18 12:26:50 UTC (1376828810)
[ 3.028433] ALSA device list:
[ 3.040079] #0: OLPC XO-1.75
[ 3.048212] Freeing init memory: 244K
[ 3.086390] tmpfs: No value for mount option 'strictatime'
[ 3.122856] tmpfs: No value for mount option 'strictatime'
[ 3.145885] tmpfs: No value for mount option 'strictatime'
[ 3.195532] dracut: dracut-18 (Spherical Cow) dracut-024-25.git20130205.fc18
[ 3.237807] systemd-udevd[83]: starting version 201
[ 4.641166] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[ 4.652659] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 4.670380] EXT4-fs (mmcblk0p2): recovery complete
[ 4.682598] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.713250] dracut: Remounting /dev/disk/mmc/mmc1p2 with -o
[ 4.725163] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.757018] dracut: Mounted root filesystem /dev/disk/mmc/mmc1p2
[ 4.775477] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.790436] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended
[ 4.804452] EXT4-fs (mmcblk0p1): mounted filesystem without journal. Opts: (null)
[ 4.830818] Dsize 15515648 Psize 15376384 Pstart 139264 Pend 15515648
[ 5.043825] hub 1-1:1.0: hub_suspend
[ 5.043889] usb 1-1: unlink qh256-0001/ec3ac240 start 1 [1/0 us]
[ 5.044346] usb 1-1: usb auto-suspend, wakeup 1
[ 5.093929] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 5.566116] dcon_freeze_store: 0
[ 5.569520] dcon_source_switch to CPU
[ 5.607890] olpc-dcon: The CPU has control
[ 5.649367] dracut: Switching root
[ 5.772406] systemd[1]: systemd 201 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 5.788059] systemd[1]: Set hostname to <xo-d1-c9-59.localdomain>.
[ 5.948696] systemd[1]: Started Replay Read-Ahead Data.
[ 5.953971] systemd[1]: Expecting device dev-ttyS2.device...
[ 5.959767] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.967616] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.975217] systemd[1]: Starting Remote File Systems.
[ 5.980403] systemd[1]: Reached target Remote File Systems.
[ 5.986001] systemd[1]: Starting Syslog Socket.
[ 5.990598] systemd[1]: Listening on Syslog Socket.
[ 5.995634] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 6.002243] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.009351] systemd[1]: Starting Delayed Shutdown Socket.
[ 6.014762] systemd[1]: Listening on Delayed Shutdown Socket.
[ 6.020735] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.030087] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 6.038211] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.046139] systemd[1]: Starting Paths.
[ 6.049974] systemd[1]: Reached target Paths.
[ 6.054438] systemd[1]: Starting Encrypted Volumes.
[ 6.059319] systemd[1]: Reached target Encrypted Volumes.
[ 6.064904] systemd[1]: Starting Journal Socket.
[ 6.069718] systemd[1]: Listening on Journal Socket.
[ 6.075949] systemd[1]: Started Set Up Additional Binary Formats.
[ 6.082130] systemd[1]: Mounted Huge Pages File System.
[ 6.087419] systemd[1]: Starting Setup Virtual Console...
[ 6.102904] systemd[1]: Started Load Kernel Modules.
[ 6.108858] systemd[1]: Mounting Debug File System...
[ 6.115245] systemd[1]: Mounted Configuration File System.
[ 6.122699] systemd[1]: Starting Journal Service...
[ 6.132200] systemd[1]: Started Journal Service.
[ 6.246892] systemd[1]: Starting Apply Kernel Variables...
[ 6.265540] systemd[1]: Mounted FUSE Control File System.
[ 6.270935] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.295532] systemd[1]: Starting udev Kernel Socket.
[ 6.300739] systemd[1]: Listening on udev Kernel Socket.
[ 6.329941] systemd[1]: Starting udev Control Socket.
[ 6.343942] systemd[1]: Listening on udev Control Socket.
[ 6.349497] systemd[1]: Starting udev Coldplug all Devices...
[ 6.365585] systemd[1]: Starting udev Kernel Device Manager...
[ 6.372851] systemd[1]: Starting Swap.
[ 6.393521] systemd[1]: Reached target Swap.
[ 6.403889] systemd[1]: Started File System Check on Root Device.
[ 6.410089] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.418647] systemd-udevd[209]: starting version 201
[ 6.436849] systemd[1]: Started udev Kernel Device Manager.
[ 6.459587] systemd[1]: Started Setup Virtual Console.
[ 6.484319] systemd[1]: Mounted Debug File System.
[ 6.494544] systemd[1]: Started Apply Kernel Variables.
[ 6.509440] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.640948] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 7.063957] hub 1-0:1.0: hub_suspend
[ 7.063957] usb usb1: bus auto-suspend, wakeup 1
[ 7.063988] pxau2o-ehci d4208000.usb: suspend root hub
[ 7.347074] siv120d 0-0033: chip found @ 0x66 (i2c-gpio-1)
[ 7.536957] got GPIOs power=150 reset=102
[ 7.597341] zforce: found zForce firmware 0.0.0.10
[ 7.597366] zforce: running in multitouch mode
[ 7.753136] input: zForce touchscreen as /devices/d4033000.i2c/i2c-5/5-0050/input/input8
[ 7.812115] usbcore: registered new interface driver sisusb
[ 7.845375] psmouse serio1: sentelic: Finger Sensing Pad, hw: 13.2.6, sn: 0, sw: 1.1.0-K
[ 7.859254] Bluetooth: Core ver 2.16
[ 7.868964] usbcore: registered new interface driver udlfb
[ 7.912464] NET: Registered protocol family 31
[ 7.925581] usbcore: deregistering interface driver sisusb
[ 7.955890] usbcore: deregistering interface driver udlfb
[ 8.035263] Bluetooth: HCI device and connection manager initialized
[ 8.044158] Bluetooth: HCI socket layer initialized
[ 8.056161] runin-check: noop
[ 8.059590] Bluetooth: L2CAP socket layer initialized
[ 8.081360] siv120d 0-0033: reset...
[ 8.103725] Bluetooth: SCO socket layer initialized
[ 8.157897] Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2
[ 8.224155] input: FSPPS/2 Sentelic FingerSensingPad as /devices/d4290000.ap-sp/serio1/input/input9
[ 8.834462] dcon_freeze_store: 1
[ 8.852684] dcon_source_switch to DCON
[ 8.894819] olpc-dcon: The DCON has control
[ 9.100113] mousedev: PS/2 mouse device common for all mice
[ 9.414376] input: olpc-kbdshim virtual keyboard as /devices/virtual/input/input10
[ 9.422544] input: olpc-kbdshim virtual mouse as /devices/virtual/input/input11
[ 9.535665] input: olpc-kbdshim virtual touchscreen as /devices/virtual/input/input12
[ 9.644671] siv120d 0-0033: reset...
[ 9.658570] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.383868] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
[ 11.390814] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[ 11.491200] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (14.66.9.p96)
[ 11.544866] pxa168fb: set_screen for fbi 0
[ 11.558354] systemd-udevd[220]: renamed network interface mlan0 to eth0
[ 11.616597] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 12.016176] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 12.016286] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 12.037970] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 12.043793] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 12.050546] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 12.056653] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 12.062994] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 12.070008] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 12.076623] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 12.083456] pxa168fb_open GFX layer, fbi 0 opened 2 times ----
[ 12.123151] pxa168fb: set_screen for fbi 0
[ 13.341866] fuse init (API version 7.19)
[ 24.613947] dcon_freeze_store: 0
[ 24.617529] dcon_source_switch to CPU
[ 24.647830] olpc-dcon: The CPU has control
[ 86.695257] mwifiex_sdio mmc0:0001:1: assoc: requested bss not found in scan results
[ 86.792570] netlink: 12 bytes leftover after parsing attributes.
[ 86.807099] netlink: 12 bytes leftover after parsing attributes.
[ 86.807128] netlink: 12 bytes leftover after parsing attributes.
[ 181.892648] olpc-ec-1.75: got event 04
[ 228.393795] hdmi_hpd_handler
[ 228.893795] hdmi_hpd_handler
[ 229.893795] work_launch
[ 229.893823] ++++++++++++ hdmi_hpd_work state 4000 hdmi_state 0
[ 248.923794] hdmi_hpd_handler
[ 249.003797] hdmi_hpd_handler
[ 249.383798] hdmi_hpd_handler
[ 249.763797] hdmi_hpd_handler
[ 250.763794] work_launch
[ 250.763822] ++++++++++++ hdmi_hpd_work state 4000 hdmi_state 0
[ 307.196014] hdmi_hpd_handler
[ 307.903693] hdmi_hpd_handler
[ 308.893812] work_launch
[ 308.893825] ++++++++++++ hdmi_hpd_work state 4000 hdmi_state 0
[ 382.109472] olpc-ec-1.75: got event 04
[ 581.761891] olpc-ec-1.75: got event 04
[ 599.710665] hdmi_hpd_handler
[ 600.703796] work_launch
[ 600.703825] hdmi_ref_clock enabled
[ 600.813803] hdmi_hpd_handler
[ 600.933805] 1920x1080 @ 60 Hz valid mode
[ 600.933860] Adding mode 1920x1080
[ 600.937756] REJECT: 1280x800 @ 59 Hz valid mode
[ 600.946198] 640x480 @ 60 Hz valid mode
[ 600.949929] Adding mode 640x480
[ 600.953040] REJECT: 800x600 @ 60 Hz valid mode
[ 600.957956] REJECT: 1024x768 @ 60 Hz valid mode
[ 600.957956] REJECT: 1600x1200 @ 60 Hz valid mode
[ 600.967391] REJECT: 1400x1050 @ 60 Hz valid mode
[ 600.967401] REJECT: 1280x1024 @ 60 Hz valid mode
[ 600.977130] REJECT: 1280x960 @ 60 Hz valid mode
[ 600.981634] 1280x720 @ 60 Hz valid mode
[ 600.985811] Adding mode 1280x720
[ 600.985820] pxa168fb_init_modes
[ 600.992141] pxa168fb: set_screen for fbi 1
[ 600.996735] surface: xres 1200 xres_z 1440 yres 900 yres_z 1080
left 240 top 0
[ 601.005648] Using config for 1920x1080 CEA
[ 601.005648] hdmi_video_cfg: mclk_div 0x6
[ 601.015097] hdmi_video_cfg: hd_en 1
[ 601.015105] hdmi_video_cfg: I have auto-learned the video frame format
[ 601.025570] ++++++++++++ hdmi_hpd_work state 0 hdmi_state 1
[ 601.813811] work_launch
[ 601.813825] ++++++++++++ hdmi_hpd_work state 4000 hdmi_state 0
More information about the Devel
mailing list