quozl at laptop.org
Wed Mar 9 16:37:46 EST 2011
On Wed, Mar 09, 2011 at 11:31:24AM -0500, Kevin Gordon wrote:
> OK, the little 8GiB microSD card inserted into an SD adapter, inserted
> into the external SD slot, passed the dir test that James said to
> perform at OFW. Didnt complain.
Good. You must test again if you change cards, by the way.
> However, it is a "Class 2" Sandisk card, so it might not really be the
> right way to go.
You can fs-update it in the external slot, and this will give you a good
indication of write performance in two ways; the flickering of the
storage LED during the fs-update, and the total time shown at the end of
ok devalias fsdisk /sd/disk at 1:0
ok fs-update ...
Then you can boot it, and the laptop should boot from the external card
and not use the internal card.
> Before I do the surgery, armed with silver heat sink paste,
I've never tried heat sink paste, I don't know if it is recommended, but
there's a thermal test in OpenFirmware you might try before and after.
ok test /switches
It instructs you to close the laptop, after which you should open it,
then it asks for e-book configuration.
Note the temperature rise. Note your environment temperature so that
you can reproduce the test reliably.
> advice please: go, no-go, spend the extra pennies and get a Class
A faster card is certainly worth getting, but "Class 4/6/8/10" doesn't
really indicate how fast it will be. The definition of these classes
corresponds to sequential write rate by a camera to a FAT filesystem,
not random writes to an ext3 filesystem!
> All I know for sure is the 2GiB card in there has to be replaced.
> There are progressively more and red squares appearing on every
I don't agree with your assessment. It might easily be another defect,
and not the card itself. If it were in my hands I would do more write
testing on the internal card, using Tiny Core booted from USB.
You might defer the surgery and instead use the external slot for a
More information about the Devel