Adventurers: please take new firmware Q2B83 and a build 353 for a test drive.

[Michail Bletsas]

Please note that those instructions assume the existence of an MPP ( mesh 
portal point) in the mesh cloud.
We happen to have those at OLPC but you probably don't, so ignore the 
mppreq_client.py script.
If you happen to have more than one laptop, running msh0-conf will 
configure the mesh interfaces so that they can talk via them

Sorry for the confusion,

Michail





> > >
> > >
> > >
> > > ---------- Forwarded message ----------
> > > From: Michail Bletsas <mbletsas at media.mit.edu>
> > > To: walter at laptop.org
> > > Date: Wed, 28 Mar 2007 14:16:42 -0400 (EDT)
> > > Subject: how to get internet access via our mesh testbed
> > >
> > > In order to try internet access via our mesh testbed you need to
> do two
> > > things:
> > >
> > > 1. configure and start your msh0 interface.
> > > The attached msh0-conf script will do that and assign a network
> 10.
> > > address to it based on the last 3 bytes of its MAC address
> > >
> > > 2. check for a mesh portal (internet gateway). To do that run the
> attached
> > > mppreq_client.py script. No news is good news when you run that
> script.
> > > If a mesh portal gets discovered, its IP address will be added to
> the
> > > routing table as the default route.
> > >
> > >
> > > M.
> > >
> > >
> > >
> > > _______________________________________________
> > > Devel mailing list
> > > Devel at laptop.org
> > > http://mailman.laptop.org/mailman/listinfo/devel
> > >
> > >
> > >
> > 
> > 
> -- 
> Jim Gettys
> One Laptop Per Child
> 
> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.laptop.org/pipermail/devel/attachments/20070329/94a04fbb/attachment.html>