[Testing] Testing Summary, Auckland - 28 April 2012

[Walter Bender]

On Sun, May 20, 2012 at 10:00 PM, Walter Bender <walter.bender at gmail.com> wrote:
> On Sat, May 19, 2012 at 12:32 PM, Daniel Drake <dsd at laptop.org> wrote:
>> On Sat, Apr 28, 2012 at 4:17 PM, Tom Parker <tom at carrott.org> wrote:
>>> Details:
>>> One of our XO-1.5s refused to fs-update os8, complaining about something to
>>> do with the first block and erasing or something. Unfortunately I observed
>>> this a few days ago and then when I came to re-visit, os8 just installed on
>>> all the XOs, so I don’t know what happened there.
>>
>> Next time you see a fs-update related problem please note the firmware version.
>>
>> I suspect what might have happened is that the flash completed but it
>> printed a misleading error (old firmware version).
>> Then you rebooted, it upgraded the firmware, and when you tried again
>> you were running a fixed firmware version.
>>
>>> poppy-copy (XO-1.5 B2) failed to boot after installing os8 complaining about
>>> read only filesystems. re-flashing did not help. I haven’t looked in to this
>>> in any detail.
>>
>> Would be interested in serial console logs from boot if you have time.
>>
>>> rosella (XO-1.5) has very very small fonts on os8, even after a reboot
>>
>> Where do you observe the small fonts? Can you post a screenshot?
>>
>>> Ivy (XO-1.5) had a very bad resume from suspend, the laptop locked up for so
>>> long I thought it had crashed. I was about to hard reset it when processed
>>> some of my keyboard input and locked again. Eventually it started behaving
>>> normally but there was no eth0 for a few more minutes. After this it
>>> appeared to happy. I have the whole /var/log/messages if anyone wants it,
>>> relevant excerpt here:
>>
>> We have some issues with libertas on suspend/resume, hopefully to be
>> fixed soon. Please keep testing.
>>
>
> I've patched Measure to fix the problem with rapid pressing of the
> radio buttons.
>
>>> Measure’s trigger doesn’t seem to work at all now. Also, if you reduce
>>> either gain to zero the display stops updating until you turn off the
>>> trigger.
>
> Will investigate this as per #2203

The freezing was due to a zero-dvide error. Still investigating the trigger bug.

-walter
>
>>> Restoring the gain does not help. Measure uses about 15% cpu even
>>> when it is hidden, maybe it should stop processing when in the background?
>
> Not clear that we want to do this if data is being captured. I suppose
> I could check to see it capture is enabled and only hold onto the
> device if it is.
>
>>>
>>> The record feature doesn’t seem to do anything.
>>>
>>> Measure’s page on aslo points to http://wiki.laptop.org/go/Measure which
>>> claims to be out of date and points back to aslo. Is there any up-to-date
>>> documentation?
>>
>> Walter, please test/comment.
>>
>> Thanks,
>> Daniel
>
>
>
> --
> Walter Bender
> Sugar Labs
> http://www.sugarlabs.org



-- 
Walter Bender
Sugar Labs
http://www.sugarlabs.org