[Testing] Testing Summary, Auckland - 28 April 2012

[Walter Bender]

On Sat, May 19, 2012 at 12:32 PM, Daniel Drake <dsd at laptop.org> wrote:
> On Sat, Apr 28, 2012 at 4:17 PM, Tom Parker <tom at carrott.org> wrote:
>> Details:
>> One of our XO-1.5s refused to fs-update os8, complaining about something to
>> do with the first block and erasing or something. Unfortunately I observed
>> this a few days ago and then when I came to re-visit, os8 just installed on
>> all the XOs, so I don’t know what happened there.
>
> Next time you see a fs-update related problem please note the firmware version.
>
> I suspect what might have happened is that the flash completed but it
> printed a misleading error (old firmware version).
> Then you rebooted, it upgraded the firmware, and when you tried again
> you were running a fixed firmware version.
>
>> poppy-copy (XO-1.5 B2) failed to boot after installing os8 complaining about
>> read only filesystems. re-flashing did not help. I haven’t looked in to this
>> in any detail.
>
> Would be interested in serial console logs from boot if you have time.
>
>> rosella (XO-1.5) has very very small fonts on os8, even after a reboot
>
> Where do you observe the small fonts? Can you post a screenshot?
>
>> Ivy (XO-1.5) had a very bad resume from suspend, the laptop locked up for so
>> long I thought it had crashed. I was about to hard reset it when processed
>> some of my keyboard input and locked again. Eventually it started behaving
>> normally but there was no eth0 for a few more minutes. After this it
>> appeared to happy. I have the whole /var/log/messages if anyone wants it,
>> relevant excerpt here:
>
> We have some issues with libertas on suspend/resume, hopefully to be
> fixed soon. Please keep testing.
>

I've patched Measure to fix the problem with rapid pressing of the
radio buttons.

>> Measure’s trigger doesn’t seem to work at all now. Also, if you reduce
>> either gain to zero the display stops updating until you turn off the
>> trigger.

Will investigate this as per #2203

>> Restoring the gain does not help. Measure uses about 15% cpu even
>> when it is hidden, maybe it should stop processing when in the background?

Not clear that we want to do this if data is being captured. I suppose
I could check to see it capture is enabled and only hold onto the
device if it is.

>>
>> The record feature doesn’t seem to do anything.
>>
>> Measure’s page on aslo points to http://wiki.laptop.org/go/Measure which
>> claims to be out of date and points back to aslo. Is there any up-to-date
>> documentation?
>
> Walter, please test/comment.
>
> Thanks,
> Daniel



-- 
Walter Bender
Sugar Labs
http://www.sugarlabs.org