[Server-devel] [XSCE] cubox wifi

[George Hunt]

Jon,

In the long run, (my opinion), a cookbook description (similar to the
solidrun link) of the process would be more needed than a tarball.  Your
time, and our education, has real value.


On Tue, Feb 25, 2014 at 12:44 AM, Jon Nettleton <jon.nettleton at gmail.com>wrote:

> George,
>
> Things have actually changed a bit as the new kernel is using the new
> device-tree based configuration.  I will build you guys a testing
> kernel tarball and u-boot in a little bit.
>
> -Jon
>
> On Tue, Feb 25, 2014 at 12:18 AM, George Hunt <georgejhunt at gmail.com>
> wrote:
> > Hi Jon,
> >
> > Is it correct that I can follow the directions at:
> >
> >
> >
> http://imx.solid-run.com/wiki/index.php?title=Building_the_kernel_and_u-boot_for_the_CuBox-i_and_the_HummingBoard
> >
> > with a clone from the github link you provided at
> > https://github.com/linux4kix/linux-linaro-stable-mx6? Are there any
> gotchas?
> > Recommendations?
> >
> > I forget the details from one month/day to the next.
> >
> >
> > On Mon, Feb 24, 2014 at 9:38 AM, Jon Nettleton <jon.nettleton at gmail.com>
> > wrote:
> >>
> >> Finally out and ready for use.
> >>
> >> https://github.com/linux4kix/linux-linaro-stable-mx6
> >>
> >> All the hardware is functional at this point.  The wifi driver is a
> >> bit chatty and needs a bit more love for AP mode.  Everything else
> >> from crypto to esata should be good to go.
> >>
> >> -Jon
> >>
> >> On Sun, Feb 23, 2014 at 5:28 PM, Jon Nettleton <jon.nettleton at gmail.com
> >
> >> wrote:
> >> > It was probably a UHS capable card.  We found some hardware design
> >> > problems that will need to be rectified to support UHS speeds for the
> >> > sdcard.  For now we will be limiting the card-slot to standard SD high
> >> > speed modes of 50Mhz which equates to around 20MB/s
> >> >
> >> > On Sun, Feb 23, 2014 at 5:12 PM, Tim Moody <tim at timmoody.com> wrote:
> >> >> sounds great.  one thing I noticed in Haiti was that I could not get
> a
> >> >> 16G
> >> >> sd card to be recognized.  is this expected or was it my card?
> >> >>
> >> >> Tim
> >> >> -----Original Message----- From: Jon Nettleton
> >> >> Sent: Sunday, February 23, 2014 11:03 AM
> >> >> To: xsce-devel
> >> >> Cc: server-devel at lists.laptop.org
> >> >> Subject: Re: [XSCE] cubox wifi
> >> >>
> >> >>
> >> >> Tim,
> >> >>
> >> >> Actually the 3.10 kernel is done.  The wifi driver is a little chatty
> >> >> and I will work on sorting that out but it is functional.  I am just
> >> >> cleaning up the last few patches and will be pushing the kernel for
> >> >> initial testing in a few hours.
> >> >>
> >> >> -Jon
> >> >>
> >> >> On Sat, Feb 22, 2014 at 5:34 PM, Tim Moody <tim at timmoody.com> wrote:
> >> >>>
> >> >>> Jon,
> >> >>>
> >> >>> Can you (or anyone else) tell me where to find the drivers for the
> >> >>> cubox
> >> >>> wifi adapter you mentioned on the call on Tue.
> >> >>>
> >> >>> Thanks,
> >> >>>
> >> >>> Tim
> >> >>
> >> >>
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.laptop.org/pipermail/server-devel/attachments/20140225/173c9369/attachment-0001.html>