[Server-devel] [XSCE] cubox wifi

[Jon Nettleton]

George,

Things have actually changed a bit as the new kernel is using the new
device-tree based configuration.  I will build you guys a testing
kernel tarball and u-boot in a little bit.

-Jon

On Tue, Feb 25, 2014 at 12:18 AM, George Hunt <georgejhunt at gmail.com> wrote:
> Hi Jon,
>
> Is it correct that I can follow the directions at:
>
>
> http://imx.solid-run.com/wiki/index.php?title=Building_the_kernel_and_u-boot_for_the_CuBox-i_and_the_HummingBoard
>
> with a clone from the github link you provided at
> https://github.com/linux4kix/linux-linaro-stable-mx6? Are there any gotchas?
> Recommendations?
>
> I forget the details from one month/day to the next.
>
>
> On Mon, Feb 24, 2014 at 9:38 AM, Jon Nettleton <jon.nettleton at gmail.com>
> wrote:
>>
>> Finally out and ready for use.
>>
>> https://github.com/linux4kix/linux-linaro-stable-mx6
>>
>> All the hardware is functional at this point.  The wifi driver is a
>> bit chatty and needs a bit more love for AP mode.  Everything else
>> from crypto to esata should be good to go.
>>
>> -Jon
>>
>> On Sun, Feb 23, 2014 at 5:28 PM, Jon Nettleton <jon.nettleton at gmail.com>
>> wrote:
>> > It was probably a UHS capable card.  We found some hardware design
>> > problems that will need to be rectified to support UHS speeds for the
>> > sdcard.  For now we will be limiting the card-slot to standard SD high
>> > speed modes of 50Mhz which equates to around 20MB/s
>> >
>> > On Sun, Feb 23, 2014 at 5:12 PM, Tim Moody <tim at timmoody.com> wrote:
>> >> sounds great.  one thing I noticed in Haiti was that I could not get a
>> >> 16G
>> >> sd card to be recognized.  is this expected or was it my card?
>> >>
>> >> Tim
>> >> -----Original Message----- From: Jon Nettleton
>> >> Sent: Sunday, February 23, 2014 11:03 AM
>> >> To: xsce-devel
>> >> Cc: server-devel at lists.laptop.org
>> >> Subject: Re: [XSCE] cubox wifi
>> >>
>> >>
>> >> Tim,
>> >>
>> >> Actually the 3.10 kernel is done.  The wifi driver is a little chatty
>> >> and I will work on sorting that out but it is functional.  I am just
>> >> cleaning up the last few patches and will be pushing the kernel for
>> >> initial testing in a few hours.
>> >>
>> >> -Jon
>> >>
>> >> On Sat, Feb 22, 2014 at 5:34 PM, Tim Moody <tim at timmoody.com> wrote:
>> >>>
>> >>> Jon,
>> >>>
>> >>> Can you (or anyone else) tell me where to find the drivers for the
>> >>> cubox
>> >>> wifi adapter you mentioned on the call on Tue.
>> >>>
>> >>> Thanks,
>> >>>
>> >>> Tim
>> >>
>> >>
>
>