[Server-devel] Best XSCE strategy for us in Pacific with XO-1.5 2GB Testing XSCE 3 on XO 1.5 2GB os855
David Leeming
david at leeming-consulting.com
Wed Jun 19 15:03:37 EDT 2013
All going well so far - managed to install the 13.1.0 os on an 8GB SD card
and have proceeded with the XCSE installation up to including the bootstrap.
I assume that as it is on the external SD card anyway, I don't need to run
prep-storage?
I was also wondering, how important it is to have a USB Ethernet adapter
present whilst setting it up and whether it needs to be active (i.e.
connected to an AP) whilst running xs-setup
Finally, is there any performance penalty for running it from the external
SD card?
David Leeming
Solomon Islands
-----Original Message-----
From: server-devel-bounces at lists.laptop.org
[mailto:server-devel-bounces at lists.laptop.org] On Behalf Of David Leeming
Sent: Tuesday, 18 June 2013 4:45 p.m.
To: 'James Cameron'; 'Jerry Vonau'
Cc: 'George Hunt'; 'Michael Hutak'; 'server-devel'; 'Ian Thomson'
Subject: Re: [Server-devel] Best XSCE strategy for us in Pacific with XO-1.5
2GB Testing XSCE 3 on XO 1.5 2GB os855
Thanks all for the great help and information. I will install the 13.1.0 os
on my 1.5 on an external 8GB SD card and then test the XCSE installation,
and let you know.
David Leeming
Solomon Islands
-----Original Message-----
From: quozl at us.netrek.org [mailto:quozl at us.netrek.org] On Behalf Of James
Cameron
Sent: Tuesday, 18 June 2013 4:30 p.m.
To: Jerry Vonau
Cc: George Hunt; David Leeming; server-devel; Michael Hutak; Ian Thomson;
David Farning
Subject: Re: Best XSCE strategy for us in Pacific with XO-1.5 2GB Testing
XSCE 3 on XO 1.5 2GB os855
On Tue, Jun 18, 2013 at 12:20:04AM -0500, Jerry Vonau wrote:
> This was the issue, no matter how careful I was inserting the
> SD-card the tab would move to locked. I used a dab of instant glue,
> that was enough to prevent the tab from moving.
Ah, good. Yes, I've heard of that. Also, as it works fine for
fs-update it makes one think it is not write protected. I don't know
if there is a specification for the force required to move the tab.
--
James Cameron
http://quozl.linux.org.au/
_______________________________________________
Server-devel mailing list
Server-devel at lists.laptop.org
http://lists.laptop.org/listinfo/server-devel
More information about the Server-devel
mailing list