No subject
Sun Oct 31 06:30:26 EDT 2010
192.168.0.210) and mixed results...
http://192.168.0.210 gives the Firefox error "Server not found, Firefox =
can't find the server at schoolserver.patukae.org" (showing that it has =
found something at least....). Same with http://192.168.0.210/moodle/=20
However, the MediaWiki installed on the XS is fine =
(http://192.168.0.210/wiki is fully accessible).
The difference is that moodle lives in /var/www/moodle but the wiki =
lives in /var/www/html/wiki
Would be sincerely grateful for the last piece in the puzzle.... so =
would all the teachers here, as this firefighting is going on in =
parallel with the XS/wiki deployment!
David Leeming
Solomon Islands Rural Link=20
..
-----Original Message-----
From: Jerry Vonau [mailto:jvonau at shaw.ca]=20
Sent: Monday, 1 November 2010 4:15 p.m.
To: David Leeming
Cc: 'XS Devel'
Subject: RE: [Server-devel] Bridging XS to another network
On Mon, 2010-11-01 at 11:35 +1100, David Leeming wrote:
> Hi thanks jerry,
>=20
> Almost there, just need clarification...
>=20
> On the router, what should I use for the LAN network, like this or =
different?
> 172.18.0.88
> 255.255.255.0 ????
> (is that correct? It means the network does not include the higher =
ranges 172.18.96.xxx etc)
>=20
That should work, then only the XS has a direct route, while the XOs on
172.18.96.xxx don't. =20
> Should the router firewall settings be virtual server port 80 to =
172.18.0.1??? or 172.18.???.???=20
> What is the main IP address of the XS, I thought is was 172.18.0.1
>=20
use 172.18.0.1 as the target of the port forwarding, that should work
once the default route is set as below.
> To add a route on the XS, do you mean (and what are the ??/):
>=20
> route add default gw 172.18.0.88 netmask 255.255.???.??? landbond0???=20
>=20
Yea that is the idea, but you would need to re-add that upon reboots.
Lets try to get this to auto configure, edit ifcfg-lanbond0:2 from:
if [ $XS_SERVER_NUM =3D "1" ] ;then
ONBOOT=3Dyes
IPADDR=3D$XS_LANBOND_MAINXS_IPADDR
NETMASK=3D255.255.255.0
=20
BOOTPROTO=3Dstatic
#BONDING_OPTS=3D""
IPV6INIT=3Dno
else
=20
To be:
if [ $XS_SERVER_NUM =3D "1" ] ;then
ONBOOT=3Dyes
IPADDR=3D$XS_LANBOND_MAINXS_IPADDR
NETMASK=3D255.255.255.0
GATEWAY=3D172.18.0.88=20
BOOTPROTO=3Dstatic
#BONDING_OPTS=3D""
IPV6INIT=3Dno
else
That should create the default route via 172.18.0.88, when the network =
comes up.
restart the network service and retest
service network restart
ping 172.18.0.88
ping 192.168.1.88=20
This that fails, can you capture the output of:
ip route ls
Jerry
> David Leeming
> Solomon Islands Rural Link=20
>=20
> -----Original Message-----
> From: Jerry Vonau [mailto:jvonau at shaw.ca]=20
> Sent: Monday, 1 November 2010 10:41 a.m.
> To: David Leeming
> Cc: 'XS Devel'
> Subject: Re: [Server-devel] Bridging XS to another network
>=20
> On Sun, 2010-10-31 at 18:13 -0500, Jerry Vonau wrote:
> > On Mon, 2010-11-01 at 08:55 +1100, David Leeming wrote:
> > > Still no luck here. What it boils down to, is that when placing =
the XS
> > > (eth1 - LAN) behind a router with NAT, in order to allow the XS =
web
> > > service to be visible on the external WAN side of the router, what =
are
> > > the required LAN IP settings including netmask and firewall =
settings,
> > > including port forwarding or DMZ Host or other. Anna, you seem to =
have
> > > been able to do that but I can=E2=80=99t replicate without more =
info on your
> > > router/firewall settings.
> > >=20
> > > =20
> > >=20
> > > I have tried everything I can think of and the XS is not visible =
from
> > > the external network. Only need to be able to see Moodle, etc, =
(not
> > > interested in registering XOs on the external network)=20
> > >=20
> > > =20
> > >=20
> > > David Leeming
> > >=20
> > > Solomon Islands Rural Link=20
> > > P.O.Box 652 Honiara, Solomon Islands
> > >=20
> > > +677 7476396 (m) +677 24419 (h)
> > >=20
> > > www.leeming-consulting.com
> > >=20
> > >=20
> > > =20
> > >=20
> > > From: server-devel-bounces at lists.laptop.org
> > > [mailto:server-devel-bounces at lists.laptop.org] On Behalf Of David
> > > Leeming
> > > Sent: Sunday, 31 October 2010 11:38 a.m.
> > > To: 'Anna'
> > > Cc: 'XS Devel'
> > > Subject: Re: [Server-devel] Bridging XS to another network
> > >=20
> > >=20
> > > =20
> > >=20
> > > Anna,
> > >=20
> > > =20
> > >=20
> > > What you describe below is what I am trying to do (see the net =
diagram
> > > in my other email). I only want apache/Moodle/wiki to be available =
to
> > > the external network (your =E2=80=9Cregular LAN=E2=80=9D). =
You=E2=80=99ll see that I have a
> > > simple WRT54G router bridging but no matter what I try, I =
can=E2=80=99t see
> > > the apache service through the router. Can you say what Wan and =
LAN
> > > settings you used for your router?=20
> > >=20
> > > I used
> > >=20
> > > WAN =E2=80=93 fixed 192.168.1.88 / 255.255.255.0
> > >=20
> > > LAN =E2=80=93 fixed 172.18.0.88 / 255.255.255.0
> > >=20
> > > Port 80 forwarded from WAN to 172.18.0.1 (or DMZ host with =
171.18.0.1)
> > >=20
> > > In this set up:=20
> > >=20
> > > If I try to ping from the XS to 172.18.0.88 it is OK, if I try to
> > > 192.168.0.88 it says network unreachable.
> > >=20
> >=20
> >=20
> > You have a single interface in use, in order for the XS to see past
> > anything other than what routes that are present(these are local to =
the
> > lan), what your missing is the default gateway.=20
> >=20
> >=20
> > > But if I use a PC hooked up on the eth1 network, with fixed IP
> > > 172.18.0.89 / 255.255.255.0 (for example) I can ping the WAN =
address
> > > and beyond. This is what leads me to think it needs one extra step
> > > with route, or it may be something to do with the WRT LAN setting =
and
> > > XS having different netmasks. You can see I am reaching at straws =
a
> > > little L =20
> >=20
> >=20
> > No, you need to have a default gateway present, how are you =
configuring
> > 172.18.0.88 on the XS?
> >=20
> > Jerry
>=20
> OK, I have that backwards your running the XS as is and you have added
> the linksys with the ip address 172.18.0.88. The linksys is providing
> the route to 192.168... The XS can't respond to anything from =
192.168...
> as there is no route back to 192.168. You can either add a route to
> 192.168... via 172.18.0.88, or add 172.18.0.88 as the default gateway,
> on the XS.=20
>=20
> Jerry
>=20
>=20
>=20
More information about the Server-devel
mailing list