[Server-devel] fresh 0.6 install

Jerry Vonau jvonau at shaw.ca
Fri Oct 2 10:55:43 EDT 2009


On Fri, 2009-10-02 at 15:57 +0200, Martin Langhoff wrote:
> On Fri, Oct 2, 2009 at 3:39 PM, Tim Moody <timmoody at sympatico.ca> wrote:

> 
> > eth1 was physically present in the box.  it just didn't have anything
> > connected to it.  I supposed that the server could be installed before the
> > ap was attached. Is it necessary to have the AP attached and powered up
> > during the install?  What IP address should the AP have in order not to bump
> > into the XS's dhcp and still be on the proper subnet?
> 
> No need to have the AP connected, or anything. The subnet starts at
> 172.18.96.x but dhcpd will hand out leases there. I would suggest an
> IP address on a different subnet actually (10.0.0.0).
> 
Why not something from 172.18.1.0 or 172.18.0.0 space?  At least then
you can reach it from the local lan.   

Jerry



More information about the Server-devel mailing list