[Server-devel] Testing Plan for XO's

[Marten Vijn]

On Sat, 2008-03-15 at 08:42 +0545, Bryan Berry wrote:
> Yama Wrote:	
> >Just one suggestion, taken from the days I was in retail: use a 
> >self-adhesive label with fields already marked with Boot, Firmware, 
> >Software, Load.  Then the tester initials OK each box.  That label 
> >should be on the XO itself - it is way too easy to get a tested XO in 
> >the wrong box, this way you don't have to keep track of the boxes 
> >belonging to which XO etc and what is marked on them.
> >This used to be sort of standard procedure when QA electronics - not 
> >that common anymore...
> 
> >Yama
> 
> Thanks Yama, using the self-adhesive is a great idea. I just need to
> find one that comes off easily when we are done testing.
> 

post-it's?

http://solutions.3m.com/3MContentRetrievalAPI/BlobServlet?locale=nl_NL&univid=1114275981766&fallback=true&assetType=MMM_Image&blobAttribute=ImageFile&placeId=7BC6E48B1800BAE180A88E4927002D39&version=current

or as poor man-solution "paper masking tape" 

http://www.tapemarkt.nl/upload/img/1_Maskeertape%2080%20136.jpg


Marten

> _______________________________________________
> Server-devel mailing list
> Server-devel at lists.laptop.org
> http://lists.laptop.org/listinfo/server-devel
-- 

Marten Vijn
http://martenvijn.nl
http://wifisoft.org
http://opencommunitycamp.org