[Server-devel] Problems with iptables

[Tony Pearson]

Team,
Ok, I re-organized my test bed to be more representative of what will be 
at OLE-Nepal

(ISP)----(Hub)192.168.0.1-----192.168.0.29(Squid)172.18.0.1------172.18.0.77(XS)==AA

So, my Hub is a 4-port wired hub that also has WiFi.

Squid box has fresh XS-150 base installed, and has two NIC cards. 
(changed "schoolserver1" to "squid" in all the places I could grep)
Eth0 is 192.168.0.29 static IP.
Eht1 is 172.18.0.1 static IP.

XS box has one NIC card.
Eth0 is 172.18.0.77 static IP
Active Antenna is attached via USB as "msh0"

(a) I have my primary Windows XP box connected via the Hub at 
192.168.0.10.
Prior to this change, I was able to "SSH" remote login from the Windows 
box
to the XS box as 192.168.0.77.  I would like to be able to SSH 
(Windows->Squid)
and (Windows->Squid->XS).  I have confirmed that "sshd" is up and running,
but ssh from Windows times out with no error message.

(b) TURN_SQUID_ON and TURN_SQUID_OFF and the iptables.principle.cache
fail with error messages.  I will try to see if I can capture the 
messages.

Any suggestions?





Tony Pearson
Senior Storage Consultant, IBM System Storage?
Telephone: +1 520-799-4309 |  tie 321-4309 |  Cell: +1 520 990-8669
email: tpearson at us.ibm.com |  GSA: http://tucgsa.ibm.com/~tpearson
Blog: http://www.ibm.com/developerworks/blogs/page/InsideSystemStorage 
AKA: 990tony Paravane, eightbar specialist 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.laptop.org/pipermail/server-devel/attachments/20080216/73c2b5cc/attachment.htm