<br><font size=2 face="Courier New">Team,</font>
<br><font size=2 face="Courier New">Ok, I re-organized my test bed to be
more representative of what will be at OLE-Nepal</font>
<br>
<br><font size=2 face="Courier New">(ISP)----(Hub)192.168.0.1-----192.168.0.29(Squid)172.18.0.1------172.18.0.77(XS)==AA</font>
<br>
<br><font size=2 face="Courier New">So, my Hub is a 4-port wired hub that
also has WiFi.</font>
<br>
<br><font size=2 face="Courier New">Squid box has fresh XS-150 base installed,
and has two NIC cards. </font>
<br><font size=2 face="Courier New">(changed "schoolserver1"
to "squid" in all the places I could grep)</font>
<br><font size=2 face="Courier New">Eth0 is 192.168.0.29 static IP.</font>
<br><font size=2 face="Courier New">Eht1 is 172.18.0.1 static IP.</font>
<br>
<br><font size=2 face="Courier New">XS box has one NIC card.</font>
<br><font size=2 face="Courier New">Eth0 is 172.18.0.77 static IP</font>
<br><font size=2 face="Courier New">Active Antenna is attached via USB
as "msh0"</font>
<br>
<br><font size=2 face="Courier New">(a) I have my primary Windows XP box
connected via the Hub at 192.168.0.10.</font>
<br><font size=2 face="Courier New">Prior to this change, I was able to
"SSH" remote login from the Windows box</font>
<br><font size=2 face="Courier New">to the XS box as 192.168.0.77. I
would like to be able to SSH (Windows->Squid)</font>
<br><font size=2 face="Courier New">and (Windows->Squid->XS). I
have confirmed that "sshd" is up and running,</font>
<br><font size=2 face="Courier New">but ssh from Windows times out with
no error message.</font>
<br>
<br><font size=2 face="Courier New">(b) TURN_SQUID_ON and TURN_SQUID_OFF
and the iptables.principle.cache</font>
<br><font size=2 face="Courier New">fail with error messages. I will
try to see if I can capture the messages.</font>
<br>
<br><font size=2 face="Courier New">Any suggestions?</font>
<br>
<table>
<tr>
<td>
<tr>
<td><font size=1 face="Courier New"><br>
</font>
<table>
<tr>
<td>
<td><font size=1 color=#0060a0 face="Courier New"><b>Tony Pearson</b></font><font size=1 face="Courier New"><br>
Senior Storage Consultant, IBM System Storage™<br>
Telephone: +1 520-799-4309 | tie 321-4309 | Cell: +1 520 990-8669<br>
email: tpearson@us.ibm.com | GSA: http://tucgsa.ibm.com/~tpearson<br>
Blog: http://www.ibm.com/developerworks/blogs/page/InsideSystemStorage
AKA: 990tony Paravane, eightbar specialist </font></table>
<br>
<tr>
<td></table>
<br>