[Server-devel] XS 0.5.1-dev03 with ejabberd goodness, kernel bling, Access Point workingness... looking for xmas testers

[Reuben K. Caron]

David,

Thank you for the information.

Can you attempt to perform a clean install again with edits in line below.

David Leeming wrote:
> Hi Reuben
>
>  
>
> -          Installed 0.5 Nov 19th download on Toshiba notebook computer with
> black box prototype AA (USB)
>
> -          Fresh install (overwriting not upgrading the previously fully
> working 0.4 installation
>
> -          Set location Guadalcanal, use local time
>   
(I did not change this in my tests; I doubt this has any effect but want
to note I left this at the default setting)

> -          No optional application selected
>
> -          Install...... restart
>
> -          /etc/sysconfig/olpc-scripts/domain_config oceania.org
>   
After running domain_config

Then edit the file /etc/sysconfig/network and set hostname to
schoolserver.oceania.org (nano /etc/sysconfig/network)

Then restart (shutdown -r now)


> -          chkconfig --level 345 ejabberd on
>
> -          service ejabberd start
>
>   
Wait a few minutes for ejabberd to completely startup. You can check
it's status by running: service ejabberd status

> -          ejabberdctl register admin schoolserver.oceania.org admin 
>
>   

With a fresh install of 0.5.1 dev 3 you don't need the following from
here -->
> -          restart
>
> -          yum --enablerepo=olpcxs-testing update
>
> -          restart
>
>   
to here <--

> -          One one of 4 XOs, log onto ejabberd web admin and set up shared
> roster "Online"
>
> -          restart
>
> -          start all four XOs and register, then restart
>
>  
>   
On the XOs are registering from a fresh OS install, 8.2? If the XOs have
been previously registered; you will need to clean out their
registration by removing the server fields in
/home/olpc/.sugar/default/config.

After removing these fields; restart the XOs
Then connect the XOs to the appropriate SSID or AA.
Then register the XO.
Then restart the XO.

I hope this helps. Please let us know.

> At this stage I cannot see any other XO, and still had to do the work around
> of removing all four users from the ejabberd webadmin and restarting
> everything before I could see them in the neighbourhood views.  (as advised
> by Martin):
>
>  
>
> (Martin wrote...) To avoid re-installing the XS to re-test the "just
> registered" scenario you can
>
>  - go with a webbrowser to the ejabberd admin panel, go into the
> 'schoolserver' vhost listed there and delete all the users registered
>
>  - restart ejabberd
>
>  - restart the laptops
>
>  
>
> This happens each time a laptop is restarted. 
>
>  
>
> However, once all going, it is fine: 
>
> - All four show up in the eJabberd control panel as users
>
> - All have the same correct results for olpc-netstatus 
>
> - I tried sharing Memorize - all four OK
>
> - Video chat is OK between any two
>
> - Server access and Internet browsing all OK (updated them each online)
>
>  
>
>  
>
> Log attached
>
>  
>
>  
>
>  
>
>  
>
> David Leeming
>
> Technical Advisor, People First Network, Honiara, Solomon Islands
>
> Alternative email address: leemingdavid at yahoo.com.au 
>
>  
>
>  
>
> From: Reuben Caron [mailto:caron.reuben at gmail.com] On Behalf Of Reuben K.
> Caron
> Sent: Tuesday, 30 December 2008 12:15 p.m.
> To: David Leeming
> Cc: XS Devel; Martin Langhoff
> Subject: Re: [Server-devel] XS 0.5.1-dev03 with ejabberd goodness, kernel
> bling, Access Point workingness... looking for xmas testers
>
>  
>
> Hmm..
>
> Are you upgrading or doing this from fresh install? 
>
> If upgrade from what previous version?
>
> If from fresh install can you give more detail to the exact steps you are
> performing?
>
> (pardon me if you provided this information earlier; I quickly reviewed the
> archive and could not find anything)
>
> Reuben
>
>
> Martin Langhoff wrote: 
>
> On Mon, Dec 29, 2008 at 10:04 PM, David Leeming
>  <mailto:leeming at pipolfastaem.gov.sb> <leeming at pipolfastaem.gov.sb> wrote:
>   
>
> It works but you have to run through the procedure below each time you start
> the XOs up with the server.
>     
>
>  
> Hmmm, well, that's definitely not normal procedure!
>  
>   
>
> - I have to log onto ejabberd web admin with all XOs turned off and delete
> all users (time consuming for a class of 40....) and then start them up.
> Then it will work fine and the neighbourhood screens populate, until you
> want to start again. Next time you start everything up, you will not see the
> other XOs, until the procedure is repeated.
>     
>
>  
> I suspect there's something else happening there... on the server
> there should be a log for ejabberd, /var/log/ejabberd.log I think. Can
> you post it to the list or to me? That should give us something to
> chew on...
>  
> cheers,
>  
>  
> m
>   
>
>  
>
>
>   

-- 
Reuben K. Caron
Country Support Engineer
One Laptop per Child
Mobile: +1-617-230-3893
reuben at laptop.org
Deployments Support <http://wiki.laptop.org/go/Deployments_Support>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.laptop.org/pipermail/server-devel/attachments/20081230/d2c0c9a5/attachment.htm