latest HaitiOS-0.6 very close

[Jerry Vonau]

http://mock.laptop.org/cgit/local.13.2.0-xo1/tree/RPMS

Use the 'plain' link on the right to save the rpm.

Jerry


----- Original Message -----
From: "Tim Moody" <tim at timmoody.com>
To: "Jerry Vonau" <jvonau at shaw.ca>
Cc: "Sandra / Sora Edwards-Thro" <sora at unleashkids.org>, "Curt Thompson" <curtathompson at gmail.com>, "Developers List" <devel at lists.laptop.org>, "George Hunt" <georgejhunt at gmail.com>, "Adam Holt" <holt at unleashkids.org>
Sent: Wednesday, 18 December, 2013 3:43:11 PM
Subject: Re: latest HaitiOS-0.6 very close

but is the firmware an rpm?  I assumed it wasn't.

Tim
-----Original Message----- 
From: Jerry Vonau
Sent: Wednesday, December 18, 2013 4:12 PM
To: Tim Moody
Cc: Sandra / Sora Edwards-Thro ; Curt Thompson ; Developers List ; George 
Hunt ; Adam Holt
Subject: Re: latest HaitiOS-0.6 very close

Hi Tim,

I'd first see if you can build an image with a stock configuration before 
you introduce any changes. I'd create a yum repo containing the rpm on the 
building box, next introduce that yum repo into olpc-os-builder with an 
entry in the [repos] section of the .ini file. ie:

custom_repo_1=1,xo1-fw,file:///</full/path/to/repo/>


After your changes run OOB and check the output/packages.txt to see which 
version was installed.

Jerry


----- Original Message -----
From: "Tim Moody" <tim at timmoody.com>
To: "George Hunt" <georgejhunt at gmail.com>, "Adam Holt" 
<holt at unleashkids.org>
Cc: "Sandra / Sora Edwards-Thro" <sora at unleashkids.org>, "Curt Thompson" 
<curtathompson at gmail.com>, "Developers List" <devel at lists.laptop.org>, 
jvonau at shaw.ca
Sent: Wednesday, 18 December, 2013 12:12:48 PM
Subject: Re: latest HaitiOS-0.6 very close




>given the potential for error, I re-downloaded the q2f199, and without 
>changing name, copied it up to our boot directory.
>
>Then when I tar-ed it all up, downloaded, the tar, expanded, I discovered 
>that the presence of the bootfw.zip in the boot directory prevented the 
>4button load (finding the signed OS img using fs.zip or fs0.zip) from 
>working.
>
>The observation was that It didn't find the image after 4 button startup. 
>Then moved /boot/bootfw.zip to /boot/bootfw.zip.gh, and the img was loaded.

I went part way down the road of trying to bundle q2f19 into 21021o0.img, 
but stopped because I hoped the approach you tried would work.

http://wiki.laptop.org/go/Updating_the_XO#Firmware says the os image 
includes firmware. so I installed olpc-os-builder and had a look at 
olpc-os-12.1.0-xo1.ini, but I don’t see how to rebuild with the later 
firmware.