[Testing] [support-gang] Lost Communication in 10.1.3?

[Dr. Gerald Ardito]

The adhoc network looks like any other wireless device.
Do check the version.
I think I had to start the chat on the 1.5, but I am not sure.

Gerald

On Sunday, February 6, 2011, Caryl Bigenho <cbigenho at hotmail.com> wrote:
>
>
>
>
>
> OK I think I know what happened.  First a question... how will the ad hoc networks look on the XO-1?  They were still targets on these.  Maybe I grabbed the wrong usb stick and put 10.1.2 on them again... but I don't think so.
>
> I didn't see any parenthesis... just that the 2 XO-1s could see each other fine, but they couldn't see the 1.5s, even with sharing on.  I started the Chat on a 1.5.  Maybe it has to start on a 1.0?
>
> Caryl
>
>> Date: Sun, 6 Feb 2011 12:52:01 -0500
>> Subject: Re: [Testing] [support-gang] Lost Communication in 10.1.3?
>> From: gerald.ardito at gmail.com
>> To: cbigenho at hotmail.com
>> CC: gerald.ardito at gmail.com; support-gang at lists.laptop.org; devel at lists.laptop.org; testing at lists.laptop.org; support-gang at laptop.org
>>
>> Caryl,
>>
>> Once you connect to one of the ad-hoc networks, you will see the
>> familiar parentheses surrounding it. Then, in the Neighborhood View on
>> the the XOs, this network should appear as a wireless device.
>>
>> I would start troubleshooting by going o Settings and turning the
>> radio off and then on again.
>>
>> Good luck.
>>
>> Gerald
>>
>> On Sunday, February 6, 2011, Caryl Bigenho <cbigenho at hotmail.com> wrote:
>> >
>> >
>> >
>> >
>> >
>> > Hi Gerald,
>> >
>> > That was the first thing I tried and it didn't work for me.  I'll try it again when I get back from TX.  How did you connect the 1.0 to the network?  They are still showing as access points rather than the Mayan numerals on the 1.0s.  Maybe I need to do the install again.
>> >
>> > Caryl
>> >
>> >> Date: Sun, 6 Feb 2011 11:39:38 -0500
>> >> From: gerald.ardito at gmail.com
>> >> To: support-gang at lists.laptop.org
>> >> CC: devel at lists.laptop.org; testing at lists.laptop.org; support-gang at laptop.org
>> >> Subject: Re: [Testing] [support-gang] Lost Communication in 10.1.3?
>> >>
>> >> Caryl,
>> >>
>> >> I have been able to make this work. Here's what I did:
>> >> 1. Create an ad-hoc network on one of the 1.5s.
>> >> 2. Connect to it on the 1.0s.
>> >> 3. Open Chat and make public.
>> >>
>> >> Hope this helps.
>> >> Gerald
>> >>
>> >> On Sunday, February 6, 2011, Caryl Bigenho <cbigenho at hotmail.com> wrote:
>> >> >
>> >> >tee's what I
>> >> >
>> >> >
>> >> >.
>> >>
>> >> H
>> >> > Hi...
>> >> >
>> >> > Prepping some XOs for our booth at SCaLE 9X Feb 26-27.  When I first started charging and testing I was running 10.1.2.  I tried Chat and found that the XO-1s could easily chat with the XO-1.5s.
>> >> >
>> >> > Then I updated all of them to 10.1.3, and this ability seems to have been lost.  While the XO-1.5s connected right away to the ad hoc network, the XO-1s were totally left out.  They can only see each other.
>> >> >
>> >> > Is this an intentional change?  Is there a way for both models to communicate among themselves in 10.1.3?
>> >> >
>> >> > Caryl 		 	   		
>> >> >
>> >> _______________________________________________
>> >> Testing mailing list
>> >> Testing at lists.laptop.org
>> >> http://lists.laptop.org/listinfo/testing
>> >  		 	   		
>> >
>  		 	   		
>