re active the network mesh when suspends the system

[Esteban Arias]

if I change configuration /etc/powerd/powerd.conf runs ok.

config_MESH_DURING_SUSPEND="*yes*"

Regards


2010/12/16 Paul Fox <pgf at laptop.org>

> martin wrote:
>  > On Wed, Dec 15, 2010 at 11:52 AM, Esteban Arias
>  > <earias at plan.ceibal.edu.uy> wrote:
>  > > I have the mesh inactive (dextrose version xo-1.0)
>  > >
>  > > In the file: /etc/rc.local I have:
>  > > echo 0 > /sys/class/net/eth0/lbs_mesh
>  > >
>  > > but, when suspends the system, (close and open the laptop xo),
>  > > reactive the mesh....
>  >
>  > I think recent versions of powerd can run scripts on resume --
>  >
>
> actually post-resume scripts have been available for some time.
> it was pre-suspend scripts that were added recently.
>
> look for "Post-resume scripts" in /usr/sbin/powerd for documentation.
>
> Note:  these scripts run when there's a high likelihood that
> the system will, or did, suspend.  but the suspend may not actually
> have happened.  in the case being discussed ("echo 0 > lbs_mesh"), it
> sounds like that's probably okay, but you wouldn't want to use these
> script hooks to implement a suspend counter, or something that breaks
> the system if the suspend didn't actually take place.
>
> paul
> =---------------------
>  paul fox, pgf at laptop.org
>



-- 
    Esteban Arias
    Investigación y Desarrollo - Plan Ceibal
    Avda. Italia 6201 - Edificio Los Ceibos
    Montevideo - Uruguay.
    Tel.: 2601.57.73 Interno 2228
    E-mail : earias at plan.ceibal.edu.uy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.laptop.org/pipermail/devel/attachments/20101216/c4e9a7de/attachment.html>