8.2-760 AP connect problem

[Chris Marshall]

I just updated to 8.2-762 and things seemed to
work better with the network connections.  I'm
about to update to 8.2-763 and hope to get to
some more testing tomorrow.

--Chris

Ricardo Carrano wrote:
> 
> Have you tried removing your old/previous network configuration?
> This can be done in the Control Panel > Network > "Discard network history"
> 
  > On Sun, Sep 21, 2008 at 2:10 PM,  <jns-cmarshall at comcast.net> wrote:
>> I recently did a reinstall of 8.2-760 on my
>> MP G1G1 XO.  The new install seems to be
>> very finicky about connecting to my AP:
>>
>> 1. mesh connect keeps trying and seems
>>    to stay there with out finishing
>>
>> 2. clicking on my AP circle in the Neighborhood
>>    used to stop the mesh and start the AP
>>    connect process, now the mesh connect
>>    keeps  blinking and the AP always asks for
>>    the password but then fails to connect.
>>
>> 3. repeated clicks or waiting for some mins
>>    eventually gets an AP connection although
>>    often if the startup is not monitored the
>>    XO will select mesh and never get to the
>>    AP
>>
>> 4. turning on 2 XOs at the same time seems
>>    to make them both more insistent to get
>>    a mesh going rather than the AP
>>
>> 5. suspend and resume can cause this dance
>>    (nightmare?) to start again...