8.2-760 AP connect problem

[Ricardo Carrano]

Hi,

Have you tried removing your old/previous network configuration?
This can be done in the Control Panel > Network > "Discard network history"

Cheers!
Ricardo

On Sun, Sep 21, 2008 at 2:10 PM,  <jns-cmarshall at comcast.net> wrote:
> I recently did a reinstall of 8.2-760 on my
> MP G1G1 XO.  The new install seems to be
> very finicky about connecting to my AP:
>
> 1. mesh connect keeps trying and seems
>    to stay there with out finishing
>
> 2. clicking on my AP circle in the Neighborhood
>    used to stop the mesh and start the AP
>    connect process, now the mesh connect
>    keeps  blinking and the AP always asks for
>    the password but then fails to connect.
>
> 3. repeated clicks or waiting for some mins
>    eventually gets an AP connection although
>    often if the startup is not monitored the
>    XO will select mesh and never get to the
>    AP
>
> 4. turning on 2 XOs at the same time seems
>    to make them both more insistent to get
>    a mesh going rather than the AP
>
> 5. suspend and resume can cause this dance
>    (nightmare?) to start again...
>
> --Chris
> _______________________________________________
> Devel mailing list
> Devel at lists.laptop.org
> http://lists.laptop.org/listinfo/devel
>