No kernel messages displayed on 2.6.26-rc2

[Andres Salomon]

On Fri, 23 May 2008 12:44:39 -0400
"Denver Gingerich" <denver at ossguy.com> wrote:

> On Fri, May 23, 2008 at 2:03 AM, Alex Belits <abelits at belits.com>
> wrote:
> > Denver Gingerich wrote:
> >>
> >> For the record, this is the olpc.fth file that I'm using to boot
> >> from OFW: \ Boot script
> >> " ro root=/dev/mmcblk0p1 rootdelay=1 console=ttyS0,115200
> >> console=tty0 fbcon=font:SUN12x22" to boot-file
> >> boot sd:\boot\vmlinuz
> >
> > Add "unfreeze" (without quotes) after the first (comment) line.
> 
> Thanks for the tip.  I tried that and was successfully able to boot
> the 2.6.22-20071121.7 kernel without holding the check key on boot,
> but it made no difference when booting 2.6.26-rc2 either with or
> without the check key held.  Booting 2.6.26-rc2 still causes a
> completely white screen to be displayed (no kernel messages can be
> seen).
> 
> Any other suggestions?  Has anyone successfully booted 2.6.26-rc2 from
> the laptop.org git on a C2 XO-1?
> 

Did you manually build that?  Automated kernel builds are very
seriously broken right now..