Blue-print (was Re: [Trac #495] protective film left on LCD in B1 build)

[Bert Freudenberg]

On Nov 28, 2006, at 2:43 , Mary Lou Jepsen wrote:

> Every single unit has the protective film still on the polarizer,  
> they were
> not removed by Quanta (we can get this next time!).  You can take  
> off your
> protective film, carefully, it's only 4 screws - all on the bottom  
> of the
> brick (the brick is the LCD - motherboard assembly), you have  
> rotate the
> brick to the left, unscrew the two screws that you can get to (philips
> head), and then rotate to the right and get the other two screws.
>
> Next take off the left and right short green things (part of the  
> "bumper),
> and then take off the plastic face plate over the LCD.  Now you can  
> peel the
> thin protective layer of plastic off the polarizer.

Is there an assembly scheme somewhere for reference? The closest one  
is a CAD drawing on p. 10 of  Mark's lecture slides (http:// 
www.stanford.edu/class/ee380/Abstracts/061004.html) ...

- Bert -