[OLPC-devel] 1M config file

[Tom Sylla]

Ronald G Minnich wrote:
> 
> I can't test it ... I can't flash the 1M parts I got on the rumba. I 
> will have to set up an OLPC as a flasher.

Actually, you can flash those 1MB parts I sent you on Rumba, too. You 
just have to change the configuration to make the LPC pins talk FWH 
instead of LPC after you have booted. Just change PRI_BOOT_LOC in the 
Ball Options MSR to '11' instead of '00'. They are bits 3:2 in MSR 
51400015 (8a000015 from FS2)

Tom