[OLPC-devel] 1M config file

[Ronald G Minnich]

I can't test it ... I can't flash the 1M parts I got on the rumba. I 
will have to set up an OLPC as a flasher.

On jordan's kernel, with ub.c, I am still at this point:

sbcore: registered new driver ub
PCI: Enabling device 0000:00:0f.4 (0000 -> 0002)
ohci_hcd 0000:00:0f.4: OHCI Host Controller
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.4: irq 10, io mem 0x10002000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usbcore: registered new driver libusual

I have two keys on there, pretty standard ones, but they don't seem to 
be registering.

So I'm almost there ... is there anything I might be missing from this:
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_LIBUSUAL=y

Just for a bit, if I get this usb key up, I'm probably still going to 
kexec from the raw partition on the drive, just so I can get something 
going.

thanks

ron