#12616 NORM 13.1.0: Makey Makey board not recognized by HID on XO-4
Zarro Boogs per Child
bugtracker at laptop.org
Thu Mar 14 21:07:27 EDT 2013
#12616: Makey Makey board not recognized by HID on XO-4
---------------------------------+------------------------------------------
Reporter: mike_lee | Owner: dsd
Type: defect | Status: new
Priority: normal | Milestone: 13.1.0
Component: distro | Version: not specified
Resolution: | Keywords:
Next_action: never set | Verified: 0
Deployment_affected: | Blockedby:
Blocking: |
---------------------------------+------------------------------------------
Comment(by mike_lee):
Here is dmesg from an XO-4 running 13.1.0 build 36 with Makey Makey
plugged in:
Dup dor a'az Mubster! \_____/ Bonjour, enfants du monde!
Ciao, bambini di tutto il mondo! || o || ¡Hola, chicos del mundo!
Hallo, Kinder der Welt! |._X_.| Hallo, kinderen van de
wereld!
Hello, children of the world! //_=_=_\\ Olá, crianças do mundo!
[olpc at new-host-6 ~]$ lsusb -v
bash: lsusb: command not found
[olpc at new-host-6 ~]$ dmesg
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.7_xo4-20130308.1209.olpc.66ac429
(mockbuild at koji3.laptop.org) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8)
(GCC) ) #1 PREEMPT Fri Mar 8 12:21:27 EST 2013
[ 0.000000] CPU: ARMv7 Processor [562f5842] revision 2 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction
cache
[ 0.000000] Machine: Marvell MMP2 (Device Tree Support), model: 4B1
[ 0.000000] cma: CMA: reserved 128 MiB at 24000000
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 260096
[ 0.000000] free_area_init_node: node 0, pgdat c065ac80, node_mem_map
c06fe000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 193040 pages, LIFO batch:31
[ 0.000000] HighMem zone: 512 pages used for memmap
[ 0.000000] HighMem zone: 65024 pages, LIFO batch:15
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 258064
[ 0.000000] Kernel command line: console=ttyS2,115200 console=tty0
selinux=0 fbcon=font:SUN12x22 fb_size=8M coherent_pool=64M
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Memory: 1016MB = 1016MB total
[ 0.000000] Memory: 886192k/886192k available, 154192k reserved,
262144K highmem
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc05e7d8c (6016 kB)
.init : 0xc05e8000 - 0xc06245bc ( 242 kB)
.data : 0xc0626000 - 0xc0662990 ( 243 kB)
.bss : 0xc06629b4 - 0xc06fdbcc ( 621 kB)
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] sched_clock: 32 bits at 6MHz, resolution 153ns, wraps every
660764ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000905] Calibrating delay loop... 1059.22 BogoMIPS (lpj=5296128)
[ 0.040184] pid_max: default: 32768 minimum: 301
[ 0.040184] Mount-cache hash table entries: 512
[ 0.040526] CPU: Testing write buffer coherency: ok
[ 0.044702] ftrace: allocating 16120 entries in 48 pages
[ 0.073845] Setting up static identity map for 0x43ee90 - 0x43eee8
[ 0.075774] devtmpfs: initialized
[ 0.093812] NET: Registered protocol family 16
[ 0.153864] DMA: preallocated 65536 KiB pool for atomic coherent
allocations
[ 0.162936] L310 cache controller enabled
[ 0.163103] l2x0: 8 ways, CACHE_ID 0x880000ed, AUX_CTRL 0x32860000,
Cache size: 524288 B
[ 0.163131] mmp3_fabric_ddr_config: 0x00001000, 0x00000000, 0x00000000
[ 0.163186] mmp3_fabric_ddr_config: DDR interleave size 524288 KB
[ 0.163186] mmp3_fabric_ddr_config: DDR Port Priority ff003030,
ff003030
[ 0.163235] Wow! Can't register IRQ for DMA
[ 0.163235] Dual MC enabled, config 0x20
[ 0.167994] mmp-sram d1030000.asram: initialized
[ 0.168448] mmp-sram d1020000.vsram: initialized
[ 0.168448] OLPC board revision 4B1 (EC api 5)
[ 0.172203] bio: create slab <bio-0> at 0
[ 0.172351] SCSI subsystem initialized
[ 0.172811] usbcore: registered new interface driver usbfs
[ 0.172915] usbcore: registered new interface driver hub
[ 0.173075] usbcore: registered new device driver usb
[ 0.173636] i2c-gpio 0.camera-i2c: using pins 166 (SDA) and 165 (SCL)
[ 0.174057] i2c-gpio 0.dcon-i2c: using pins 167 (SDA) and 168 (SCL)
[ 0.174383] i2c-gpio 0.hdmi-i2c: using pins 5 (SDA) and 4 (SCL)
[ 0.174922] I2C: i2c-3: PXA I2C adapter
[ 0.175442] I2C: i2c-4: PXA I2C adapter
[ 0.175794] I2C: i2c-5: PXA I2C adapter
[ 0.176234] I2C: i2c-6: PXA I2C adapter
[ 0.176415] Linux video capture interface: v2.00
[ 0.176415] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.177094] cfg80211: Calling CRDA to update world regulatory domain
[ 0.177485] Switching to clocksource clocksource
[ 0.190660] NET: Registered protocol family 2
[ 0.191040] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.191040] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.192733] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.192733] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.193090] TCP: reno registered
[ 0.193090] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.193109] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.193144] NET: Registered protocol family 1
[ 0.193316] Trying to unpack rootfs image as initramfs...
[ 0.227558] Freeing initrd memory: 6604K
[ 0.234362] highmem bounce pool size: 64 pages
[ 0.234647] VFS: Disk quotas dquot_6.5.2
[ 0.234806] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.235351] msgmni has been set to 1487
[ 0.235924] io scheduler noop registered
[ 0.235948] io scheduler deadline registered
[ 0.235969] io scheduler cfq registered (default)
[ 0.236020] pxa168fb_gfx_init_platform_driver
[ 0.236270] pxa168fb_probe: 0
[ 0.236305] pxa168fb_gfx_probe: OLPC DCON panel isr_clear_mask not been
initialized!
[ 0.236338] MMIO start 0xd420b000, size 4096
[ 0.257538] ---------FB DMA buffer phy addr : 28000000
[ 0.267535] fb0: sclk_src 0 clk_get_rate = 400000000
[ 0.271245] pxa168fb_init_modes
[ 0.271272] platform pxa168fb_gfx.0: Enter set_mode mode 1200x900
[ 0.271272] platform pxa168fb_gfx.0: Enter pxa168fb_init_mode
[ 0.271285] platform pxa168fb_gfx.0: Enter pxa168fb_set_par, graphics
layer
[ 0.271310] platform pxa168fb_gfx.0: Enter set_dumb_screen_dimensions
fb 0 regs->screen_active 0xfe20b118
[ 0.271324] platform pxa168fb_gfx.0: Enter set_dumb_panel_control
[ 0.271332] pxa168fb: set_screen for fbi 0
[ 0.271332] fbi->active 0 on 1
[ 0.271498] pxa168fb_open GFX layer, fbi 0 opened 0 times ----
[ 0.271606] graphics fb0: Enter pxa168fb_set_par, graphics layer
[ 0.271730] platform pxa168fb_gfx.0: Enter set_dumb_screen_dimensions
fb 0 regs->screen_active 0xfe20b118
[ 0.271730] graphics fb0: Enter set_dumb_panel_control
[ 0.271738] pxa168fb: set_screen for fbi 0
[ 0.293986] Console: switching to colour frame buffer device 100x40
[ 0.313627] pxa168fb: frame buffer device was loaded to /dev/fb0 <OLPC
DCON panel>.
[ 0.317551] ---------FBoverlay DMA buffer phy addr : 29400000
[ 0.319519] pxa168fb: set_screen for fbi 0
[ 0.319898] pxa168fb_ovly: frame buffer device was loaded to /dev/fb1
<OLPC DCON panel >.
[ 0.319898] pxa168fb_gfx_init_platform_driver
[ 0.328954] pxa168fb_probe: 1
[ 0.333247] pxa168fb_gfx_probe: HDMI isr_clear_mask not been
initialized!
[ 0.337628] MMIO start 0xd420b000, size 4096
[ 0.337641] --share--FB DMA buffer phy addr : 28000000
[ 0.346176] fb1: sclk_src 0 clk_get_rate = 400000000
[ 0.350409] pxa168fb_init_modes
[ 0.350416] platform pxa168fb_gfx.1: Enter set_mode mode 1280x720
[ 0.354579] platform pxa168fb_gfx.1: Enter pxa168fb_init_mode
[ 0.354579] platform pxa168fb_gfx.1: Enter pxa168fb_set_par, graphics
layer
[ 0.354590] platform pxa168fb_gfx.1: Enter set_dumb_screen_dimensions
fb 1 regs->screen_active 0xfe20b058
[ 0.354603] platform pxa168fb_gfx.1: Enter set_dumb_panel_control
[ 0.354617] platform pxa168fb_gfx.1: Enter set_tv_interlace
[ 0.354627] pxa168fb: set_screen for fbi 1
[ 0.358761] surface: xres 1200 xres_z 960 yres 900 yres_z 720
left 160 top 0
[ 0.358771] fbi->active 0 on 1
[ 0.367113] pxa168fb: frame buffer device was loaded to /dev/fb2
<HDMI>.
[ 0.371334] pxa688_hdmi_init_platform_driver
[ 0.371355] ++++++++++++ hdmi_hpd_work state 4000 hdmi_state 0
[ 0.379820] ---------FBoverlay DMA buffer phy addr : 29600000
[ 0.379820] pxa168fb: set_screen for fbi 1
[ 0.389258] surface: xres 1200 xres_z 960 yres 900 yres_z 720
left 160 top 0
[ 0.397762] pxa168fb_ovly: frame buffer device was loaded to /dev/fb3
<HDMI - overlay>.
[ 0.397865] mmp-tdma c0ffd800.adma: initialized
[ 0.407053] pxa2xx-uart.1: ttyS2 at MMIO 0xd4017000 (irq = 28) is a
UART3
[ 1.029821] console [ttyS2] enabled
[ 1.044906]
[galcore] GC Version: GC Ver0.8.4609p8
[ 1.060138]
contiguousBase:00000000, contiguousSize:03200000
[ 1.075997] galcore options:
[ 1.083247] irqLine = 73
[ 1.091159] registerMemBase = 0xD420D000
[ 1.099763] registerMemSize = 0x00001000
[ 1.108328] irqLine2D = 75
[ 1.108334] registerMemBase2D = 0xD420F000
[ 1.124659] registerMemSize2D = 0x00001000
[ 1.133038] contiguousSize = 52428800
[ 1.141177] contiguousBase = 0x00000000
[ 1.149372] bankSize = 0x02000000
[ 1.157481] fastClear = -1
[ 1.164791] compression = -1
[ 1.171995] signal = 48
[ 1.179164] baseAddress = 0x00000000
[ 1.179170] physSize = 0x40000000
[ 1.194680] logFileSize = 0 KB
[ 1.202001] coreClock = 533
[ 1.209331] [galcore] Print out 3D chip informations:
[ 1.217833] chipModel = 0x00002000
[ 1.217840] chipRevision = 0x00005026
[ 1.233998] chipFeatures = 0xE0286CAD
[ 1.241979] chipMinorFeatures = 0xC3799EFF
[ 1.249887] chipMinorFeatures1 = 0x2E13B2D9
[ 1.257685] chipMinorFeatures2 = 0x02000000
[ 1.265394] chipMinorFeatures3 = 0x00000000
[ 1.273043] chipMinorFeatures4 = 0x00000000
[ 1.280557] gcChipSpecs = 0xa4408a64
[ 1.288055] gcChipSpecs2 = 0x00000000
[ 1.288063] gcChipSpecs3 = 0x00000000
[ 1.302580] streamCount = 4
[ 1.308902] registerMax = 64
[ 1.308902] threadCount = 1024
[ 1.321611] shaderCoreCount = 4
[ 1.327767] vertexCacheSize = 8
[ 1.327767] vertexOutputBufferSize = 1024
[ 1.340149] pixelPipes = 2
[ 1.346129] instructionCount = 256
[ 1.352294] numConstants = 0
[ 1.358269] bufferSize = 0
[ 1.358269] varyingsCount = 8
[ 1.372202] [galcore] Print out 2D chip informations:
[ 1.379530] chipModel = 0x00000300
[ 1.379539] chipRevision = 0x00004634
[ 1.393159] chipFeatures = 0xE02C7ECA
[ 1.399951] chipMinorFeatures = 0xE1399FFF
[ 1.406756] chipMinorFeatures1 = 0x2E13B219
[ 1.413538] chipMinorFeatures2 = 0x00010000
[ 1.420335] chipMinorFeatures3 = 0x00000000
[ 1.427088] chipMinorFeatures4 = 0x00000000
[ 1.433811] gcChipSpecs = 0x92108864
[ 1.440563] gcChipSpecs2 = 0x00000000
[ 1.440563] gcChipSpecs3 = 0x00000000
[ 1.453929] streamCount = 4
[ 1.459759] registerMax = 64
[ 1.459767] threadCount = 256
[ 1.471577] shaderCoreCount = 1
[ 1.471584] vertexCacheSize = 8
[ 1.483099] vertexOutputBufferSize = 512
[ 1.489057] pixelPipes = 1
[ 1.489065] instructionCount = 256
[ 1.500889] numConstants = 0
[ 1.500896] bufferSize = 0
[ 1.512614] varyingsCount = 8
[ 1.520811] gpu_probe: No irq.
[ 1.529804] brd: module loaded
[ 1.547671] lis3lv02d: 8 bits 3DC sensor found
[ 1.637527] input: ST LIS3LV02DL Accelerometer as
/devices/platform/lis3lv02d/input/input0
[ 1.648479] OLPC XO-1.75 Embedded Controller driver probed
[ 1.648479] input: Power Button as /devices/d4037000.ec-
spi/input/input1
[ 1.687820] input: OLPC OLS notify as /devices/0.ols/input/input2
[ 1.696481] OLPC Outdoor Light Sensor driver probed
[ 1.704028] OLPC XO-1.75 lid and ebook switches
[ 1.711344] input: OLPC lid switch as /devices/virtual/input/input3
[ 1.720335] input: OLPC ebook switch as /devices/virtual/input/input4
[ 1.729830] usbcore: registered new interface driver ipheth
[ 1.738775] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.748268] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[ 1.748282] pxau2o-ehci d4208000.usb: pxa9xx ehci
[ 1.756149] pxau2o-ehci d4208000.usb: new USB bus registered, assigned
bus number 1
[ 1.766971] pxa9xx_u2o_host_enable: PORTSC 0xc001800 USBMODE 0x3 USBSTS
0x1080 USBCMD 0x80b00
[ 1.767569] pxau2o-ehci d4208000.usb: park 0
[ 1.769795] pxau2o-ehci d4208000.usb: reset command 0080b02 park=3
ithresh=8 period=1024 Reset HALT
[ 1.769795] pxau2o-ehci d4208000.usb: irq 44, io mem 0xd4208000
[ 1.778931] pxau2o-ehci d4208000.usb: init command 0010005 (park)=0
ithresh=1 period=512 RUN
[ 1.797537] pxau2o-ehci d4208000.usb: USB 2.0 started, EHCI 1.00
[ 1.806783] usb usb1: default language 0x0409
[ 1.806783] usb usb1: udev 1, busnum 1, minor = 0
[ 1.806809] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 1.816896] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.827464] usb usb1: Product: pxa9xx ehci
[ 1.834992] usb usb1: Manufacturer: Linux
3.5.7_xo4-20130308.1209.olpc.66ac429 ehci_hcd
[ 1.846633] usb usb1: SerialNumber: d4208000.usb
[ 1.855218] usb usb1: usb_probe_device
[ 1.855218] usb usb1: configuration #1 chosen from 1 choice
[ 1.855233] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.855263] hub 1-0:1.0: usb_probe_interface
[ 1.855354] hub 1-0:1.0: usb_probe_interface - got id
[ 1.855377] hub 1-0:1.0: USB hub found
[ 1.862817] hub 1-0:1.0: 1 port detected
[ 1.870532] hub 1-0:1.0: standalone hub
[ 1.870532] hub 1-0:1.0: individual port power switching
[ 1.870542] hub 1-0:1.0: individual port over-current protection
[ 1.870550] hub 1-0:1.0: Single TT
[ 1.870568] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.870568] hub 1-0:1.0: power on to power good time: 20ms
[ 1.870577] hub 1-0:1.0: local power source is good
[ 1.870595] hub 1-0:1.0: enabling power on all ports
[ 1.870605] mmp3_usb_phy_init_internal: Init usb phy!!!
[ 1.880949] Initializing USB Mass Storage driver...
[ 1.889835] usbcore: registered new interface driver usb-storage
[ 1.899905] USB Mass Storage support registered.
[ 1.908552] usbcore: registered new interface driver libusual
[ 1.918567] usbcore: registered new interface driver mdc800
[ 1.928230] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800
Digital Camera
[ 1.940115] usbcore: registered new interface driver usbserial
[ 1.950371] usbcore: registered new interface driver usbserial_generic
[ 1.961245] USB Serial support registered for generic
[ 1.970753] pxau2o-ehci d4208000.usb: GetStatus port:1 status 001803 0
ACK POWER sig=j CSC CONNECT
[ 1.970768] hub 1-0:1.0: port 1: status 0101 change 0001
[ 1.970789] usbserial: USB Serial Driver core
[ 1.979915] OLPC SP keyboard/touchpad driver probed
[ 1.990073] sa1100-rtc d4010000.wakeup-rtc: rtc core: registered
d4010000.wakeup-rtc as rtc0
[ 2.003782] rtc_idt1338 4-0068: rtc core: registered rtc_idt1338 as
rtc1
[ 2.067556] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 2.067574] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 2.105590] input: AT Translated Set 2 keyboard as /devices/d4290000
.ap-sp/serio0/input/input5
[ 2.187524] usb 1-1: new high-speed USB device number 2 using pxau2o-
ehci
[ 2.280345] mmp3_thermal: setting thermal watchdog to 100.5C
[ 2.320589] sdhci: Secure Digital Host Controller Interface driver
[ 2.331726] sdhci: Copyright(c) Pierre Ossman
[ 2.340822] Registered led device: mmc0::
[ 2.348808] usb 1-1: default language 0x0409
[ 2.349184] usb 1-1: udev 2, busnum 1, minor = 1
[ 2.349201] usb 1-1: New USB device found, idVendor=05e3,
idProduct=0608
[ 2.361671] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 2.373630] usb 1-1: Product: USB2.0 Hub
[ 2.382383] mmc0: SDHCI controller on d4280800.sdhci [d4280800.sdhci]
using ADMA
[ 2.394753] usb 1-1: usb_probe_device
[ 2.394902] usb 1-1: configuration #1 chosen from 1 choice
[ 2.395186] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 2.395336] hub 1-1:1.0: usb_probe_interface
[ 2.395336] hub 1-1:1.0: usb_probe_interface - got id
[ 2.395348] hub 1-1:1.0: USB hub found
[ 2.404310] hub 1-1:1.0: 4 ports detected
[ 2.413077] mmc0: done resetting wlan
[ 2.422511] hub 1-1:1.0: standalone hub
[ 2.422523] hub 1-1:1.0: ganged power switching
[ 2.422541] hub 1-1:1.0: global over-current protection
[ 2.422541] hub 1-1:1.0: Single TT
[ 2.422549] hub 1-1:1.0: TT requires at most 32 FS bit times (2664 ns)
[ 2.422566] hub 1-1:1.0: Port indicators are supported
[ 2.422575] hub 1-1:1.0: power on to power good time: 100ms
[ 2.424750] Registered led device: mmc1::
[ 2.425084] hub 1-1:1.0: local power source is good
[ 2.425084] hub 1-1:1.0: no over-current condition exists
[ 2.425094] hub 1-1:1.0: enabling power on all ports
[ 2.426556] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 2.449271] mmc0: new SDIO card at address 0001
[ 2.458526] mmc1: SDHCI controller on d4281000.sdhci [d4281000.sdhci]
using ADMA
[ 2.471206] Registered led device: mmc2::
[ 2.507545] mmc2: SDHCI controller on d4280000.sdhci [d4280000.sdhci]
using ADMA
[ 2.519699] Registered led device: mmc3::
[ 2.520433] hub 1-1:1.0: port 2: status 0101 change 0001
[ 2.557537] mmc3: SDHCI controller on d4217000.sdhci [d4217000.sdhci]
using ADMA
[ 2.569572] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.580050] Registered led device: storage-led
[ 2.580212] usbcore: registered new interface driver usbhid
[ 2.590565] usbhid: USB HID core driver
[ 2.599212] olpc-dcon: Discovered DCON version 2
[ 2.611074] i2c-core: driver [olpc_dcon] using legacy suspend method
[ 2.623430] usb 1-1: link qh256-0001/ec3d4ec0 start 1 [1/0 us]
[ 2.623503] hub 1-1:1.0: state 7 ports 4 chg 0004 evt 0000
[ 2.623539] i2c-core: driver [olpc_dcon] using legacy resume method
[ 2.634448] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 2.635871] usbcore: registered new interface driver snd-usb-audio
[ 2.647365] mmp_pcm_probe
[ 2.666157] mmc1: new high speed DDR MMC card at address 0001
[ 2.676822] mmcblk0: mmc1:0001 SEM08G 7.39 GiB
[ 2.686037] mmcblk0boot0: mmc1:0001 SEM08G partition 1 2.00 MiB
[ 2.696715] mmcblk0boot1: mmc1:0001 SEM08G partition 2 2.00 MiB
[ 2.707813] usb 1-1.2: new full-speed USB device number 3 using pxau2o-
ehci
[ 2.719440] mmcblk0: p1 p2
[ 2.730140] mmcblk0boot1: unknown partition table
[ 2.741316] mmcblk0boot0: unknown partition table
[ 2.752215] asoc: rt5631-hifi <-> c0ffdc00.audio mapping ok
[ 2.762739] input: OLPC XO-1.75 Headphone Jack as /devices/0.audio-
complex/sound/card0/input6
[ 2.779401] input: OLPC XO-1.75 Mic Jack as /devices/0.audio-
complex/sound/card0/input7
[ 2.792566] TCP: bic registered
[ 2.800155] Initializing XFRM netlink socket
[ 2.808968] NET: Registered protocol family 10
[ 2.818018] NET: Registered protocol family 17
[ 2.827881] lib80211: common routines for IEEE802.11 drivers
[ 2.837662] usb 1-1.2: ep0 maxpacket = 8
[ 2.839823] lib80211_crypt: registered algorithm 'NULL'
[ 2.839823] Key type dns_resolver registered
[ 2.851316] usb 1-1.2: skipped 3 descriptors after interface
[ 2.848244] VFP support v0.3: implementor 56 architecture 2 part 20
variant 9 rev 6
[ 2.860315] usb 1-1.2: default language 0x0409
[ 2.860381] ThumbEE CPU extension supported.
[ 2.868839] Registering SWP/SWPB emulation handler
[ 2.877737] usb 1-1.2: udev 3, busnum 1, minor = 2
[ 2.877773] usb 1-1.2: New USB device found, idVendor=1b4f,
idProduct=2b74
[ 2.888763] PJ4 iWMMXt coprocessor enabled.
[ 2.897843] usb 1-1.2: New USB device strings: Mfr=2, Product=1,
SerialNumber=0
[ 2.909524] usb 1-1.2: Product: MaKey MaKey
[ 2.918020] usb 1-1.2: Manufacturer: SparkFun Electronics
[ 2.927837] rtc_idt1338 4-0068: setting system clock to 2013-03-15
00:54:55 UTC (1363308895)
[ 2.940778] usb 1-1.2: usb_probe_device
[ 2.940942] usb 1-1.2: configuration #1 chosen from 1 choice
[ 2.941061] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[ 2.941355] usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1)
[ 2.942581] ALSA device list:
[ 2.951060] #0: OLPC XO-1.75
[ 2.958924] Freeing init memory: 240K
[ 2.970649] mmc2: new high speed SDHC card at address b368
[ 2.989745] mmcblk1: mmc2:b368 00000 3.74 GiB
[ 3.004894] mmcblk1: p1
[ 3.022440] tmpfs: No value for mount option 'strictatime'
[ 3.062529] tmpfs: No value for mount option 'strictatime'
[ 3.093822] tmpfs: No value for mount option 'strictatime'
[ 3.143392] dracut: dracut-18 (Spherical Cow)
dracut-024-25.git20130205.fc18
[ 3.186734] systemd-udevd[83]: starting version 197
[ 4.257536] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 4.292042] dracut: Remounting /dev/disk/mmc/mmc1p2 with -o
[ 4.304820] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.338502] dracut: Mounted root filesystem /dev/disk/mmc/mmc1p2
[ 4.358869] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 4.375437] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs,
running e2fsck is recommended
[ 4.389821] EXT4-fs (mmcblk0p1): mounted filesystem without journal.
Opts: (null)
[ 4.412892] Dsize 15515648 Psize 15376384 Pstart 139264 Pend 15515648
[ 4.653566] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 4.854657] dcon_freeze_store: 0
[ 4.858224] dcon_source_switch to CPU
[ 4.885123] graphics fb0: Enter pxa168fb_active fbi[0] active 1
[ 4.885633] olpc-dcon: The CPU has control
[ 4.989537] dracut: Switching root
[ 5.114976] systemd[1]: systemd 195 running in system mode. (+PAM
+LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ;
fedora)
[ 5.130806] systemd[1]: Set hostname to <xo-93-20-4b.localdomain>.
[ 5.281834] systemd[1]: Started Replay Read-Ahead Data.
[ 5.287566] systemd[1]: Starting Forward Password Requests to Wall
Directory Watch.
[ 5.295450] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 5.303123] systemd[1]: Expecting device dev-ttyS2.device...
[ 5.309003] systemd[1]: Starting Remote File Systems.
[ 5.314205] systemd[1]: Reached target Remote File Systems.
[ 5.319777] systemd[1]: Starting Syslog Socket.
[ 5.324421] systemd[1]: Listening on Syslog Socket.
[ 5.329474] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.334892] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.340805] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.347527] systemd[1]: Listening on /dev/initctl Compatibility Named
Pipe.
[ 5.354554] systemd[1]: Starting Dispatch Password Requests to Console
Directory Watch.
[ 5.362624] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 5.370564] systemd[1]: Starting udev Kernel Socket.
[ 5.375992] systemd[1]: Listening on udev Kernel Socket.
[ 5.381300] systemd[1]: Starting udev Control Socket.
[ 5.386603] systemd[1]: Listening on udev Control Socket.
[ 5.392135] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 5.401631] systemd[1]: Starting Encrypted Volumes.
[ 5.406512] systemd[1]: Reached target Encrypted Volumes.
[ 5.412165] systemd[1]: Starting Swap.
[ 5.415924] systemd[1]: Reached target Swap.
[ 5.420339] systemd[1]: Starting Journal Socket.
[ 5.425071] systemd[1]: Listening on Journal Socket.
[ 5.430179] systemd[1]: Starting Syslog.
[ 5.434113] systemd[1]: Reached target Syslog.
[ 5.438689] systemd[1]: Started Import network configuration from
initramfs.
[ 5.445744] systemd[1]: Starting Configure read-only root support...
[ 5.456715] systemd[1]: Starting Apply Kernel Variables...
[ 5.484740] systemd[1]: Started Load Kernel Modules.
[ 5.490318] systemd[1]: Mounted FUSE Control File System.
[ 5.496033] systemd[1]: Starting Setup Virtual Console...
[ 5.513045] systemd[1]: Mounted Huge Pages File System.
[ 5.522044] systemd[1]: Starting udev Coldplug all Devices...
[ 5.579666] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.597158] systemd[1]: Mounted Configuration File System.
[ 5.608398] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.616076] systemd[1]: Starting udev Kernel Device Manager...
[ 5.648926] systemd[1]: Starting Journal Service...
[ 5.655920] systemd[1]: Started Journal Service.
[ 5.700783] systemd-udevd[249]: starting version 195
[ 5.760099] systemd[1]: Started File System Check on Root Device.
[ 5.766165] systemd[1]: Starting Remount Root and Kernel File
Systems...
[ 5.788443] systemd[1]: Mounting Debug File System...
[ 5.796414] systemd[1]: Started udev Kernel Device Manager.
[ 5.839530] systemd[1]: Started Apply Kernel Variables.
[ 5.847747] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.855127] systemd[1]: Mounted Debug File System.
[ 6.141230] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 6.738659] ov7670 0-0021: chip found @ 0x42 (i2c-gpio-1)
[ 6.856810] cdc_acm 1-1.2:1.0: usb_probe_interface
[ 6.856890] cdc_acm 1-1.2:1.0: usb_probe_interface - got id
[ 6.856913] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[ 6.896963] got GPIOs power=150 reset=102
[ 6.955674] zforce: found zForce firmware 0.0.0.7
[ 6.962771] usbcore: registered new interface driver cdc_acm
[ 7.015235] zforce: running in multitouch mode
[ 7.113289] systemd-journald[250]: Received SIGUSR1
[ 7.154907] cdc_acm: USB Abstract Control Model driver for USB modems
and ISDN adapters
[ 7.167817] input: zForce touchscreen as
/devices/d4033000.i2c/i2c-5/5-0050/input/input8
[ 7.341424] psmouse serio1: sentelic: Finger Sensing Pad, hw: 13.2.6,
sn: 0, sw: 1.1.0-K
[ 7.392390] libertas_sdio: Libertas SDIO driver
[ 7.408989] libertas_sdio: Copyright Pierre Ossman
[ 7.432685] usbcore: registered new interface driver sisusb
[ 7.489769] usbcore: registered new interface driver udlfb
[ 7.633758] usbcore: deregistering interface driver udlfb
[ 7.698252] input: FSPPS/2 Sentelic FingerSensingPad as
/devices/d4290000.ap-sp/serio1/input/input9
[ 7.735384] runin-check: noop
[ 8.484499] dcon_freeze_store: 1
[ 8.495652] dcon_source_switch to DCON
[ 8.531018] graphics fb0: Enter pxa168fb_active fbi[0] active 0
[ 8.531063] fbi->active 1 on 0
[ 8.531179] olpc-dcon: The DCON has control
[ 8.693894] mousedev: PS/2 mouse device common for all mice
[ 8.929244] graphics fb0: Enter pxa168fb_set_par, graphics layer
[ 8.929335] platform pxa168fb_gfx.0: Enter set_dumb_screen_dimensions
fb 0 regs->screen_active 0xfe20b118
[ 8.929347] graphics fb0: Enter set_dumb_panel_control
[ 8.929347] pxa168fb: set_screen for fbi 0
[ 8.967569] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 9.208426] input: olpc-kbdshim virtual keyboard as
/devices/virtual/input/input10
[ 9.308478] input: olpc-kbdshim virtual mouse as
/devices/virtual/input/input11
[ 9.829252] input: olpc-kbdshim virtual touchscreen as
/devices/virtual/input/input12
[ 10.011794] libertas_sdio mmc0:0001:1: (unregistered net_device):
20:7c:8f:93:20:4b, fw 9.70.20p0, cap 0x000003a3
[ 10.070604] libertas_sdio mmc0:0001:1: wlan0: Marvell WLAN 802.11
adapter
[ 10.153837] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 10.177770] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 10.184587] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 10.202094] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 10.236714] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 10.257033] systemd-udevd[269]: renamed network interface wlan0 to eth0
[ 10.281554] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 10.349390] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 10.357918] pxa168fb_release GFX layer, fbi 0 opened 2 times ----
[ 10.364056] pxa168fb_open GFX layer, fbi 0 opened 1 times ----
[ 10.376056] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.461706] pxa168fb_open GFX layer, fbi 0 opened 2 times ----
[ 10.548286] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.677962] graphics fb0: Enter pxa168fb_set_par, graphics layer
[ 10.678007] platform pxa168fb_gfx.0: Enter set_dumb_screen_dimensions
fb 0 regs->screen_active 0xfe20b118
[ 10.678022] graphics fb0: Enter set_dumb_panel_control
[ 10.678034] pxa168fb: set_screen for fbi 0
[ 10.690601] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 10.741650] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0004
[ 10.744545] hub 1-1:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 10.747550] usb 1-1.2: USB disconnect, device number 3
[ 10.752887] usb 1-1.2: unregistering device
[ 10.752887] usb 1-1.2: unregistering interface 1-1.2:1.0
[ 10.757706] usb 1-1.2: unregistering interface 1-1.2:1.1
[ 10.757942] usb 1-1.2: usb_disable_device nuking all URBs
[ 10.917943] hub 1-1:1.0: debounce: port 2: total 100ms stable 100ms
status 0x101
[ 10.997936] usb 1-1.2: new full-speed USB device number 4 using pxau2o-
ehci
[ 11.119563] usb 1-1.2: skipped 1 descriptor after configuration
[ 11.119624] usb 1-1.2: skipped 4 descriptors after interface
[ 11.119624] usb 1-1.2: skipped 1 descriptor after interface
[ 11.119810] usb 1-1.2: default language 0x0409
[ 11.120310] usb 1-1.2: udev 4, busnum 1, minor = 3
[ 11.120334] usb 1-1.2: New USB device found, idVendor=1b4f,
idProduct=2b75
[ 11.120346] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 11.148519] usb 1-1.2: Product: USB IO Board
[ 11.153112] usb 1-1.2: Manufacturer: Unknown
[ 11.167873] usb 1-1.2: usb_probe_device
[ 11.167873] usb 1-1.2: configuration #1 chosen from 1 choice
[ 11.169252] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[ 11.169509] cdc_acm 1-1.2:1.0: usb_probe_interface
[ 11.169509] cdc_acm 1-1.2:1.0: usb_probe_interface - got id
[ 11.169526] cdc_acm 1-1.2:1.0: This device cannot do calls on its own.
It is not a modem.
[ 11.187603] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[ 11.197902] usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1)
[ 11.197975] usb 1-1.2: adding 1-1.2:1.2 (config #1, interface 2)
[ 11.198184] usbhid 1-1.2:1.2: usb_probe_interface
[ 11.198334] usbhid 1-1.2:1.2: usb_probe_interface - got id
[ 11.200572] input: Unknown USB IO Board as
/devices/d4208000.usb/usb1/1-1/1-1.2/1-1.2:1.2/input/input13
[ 11.221257] usb 1-1.2: link qh1-0e01/ec92a900 start 0 [1/3 us]
[ 11.221686] hid-generic 0003:1B4F:2B75.0001: input: USB HID v1.01 Mouse
[Unknown USB IO Board ] on usb-d4208000.usb-1.2/input2
[ 11.249139] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0004
[ 11.449375] usb 1-1.2: link qh64-0e01/ec92a300 start 3 [1/2 us]
[ 12.339091] graphics fb0: Enter pxa168fb_active fbi[0] active 1
[ 12.339099] fbi->active 0 on 1
[ 13.419805] fuse init (API version 7.19)
[ 14.879648] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 17.200893] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 23.011257] usb 1-1.2: unlink qh64-0e01/ec92a300 start 3 [1/2 us]
[ 23.011294] usb 1-1: clear tt buffer port 2, a4 ep3 t00808d82
[ 23.018572] pxau2o-ehci d4208000.usb: reused qh ec92a300 schedule
[ 23.018572] usb 1-1.2: link qh64-0e01/ec92a300 start 3 [1/2 us]
[ 24.056166] dcon_freeze_store: 0
[ 24.073982] dcon_source_switch to CPU
[ 24.104089] graphics fb0: Enter pxa168fb_active fbi[0] active 1
[ 24.104107] olpc-dcon: The CPU has control
[ 24.127792] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 29.012541] usb 1-1.2: unlink qh64-0e01/ec92a300 start 3 [1/2 us]
[ 29.012541] usb 1-1: clear tt buffer port 2, a4 ep3 t00808d82
[ 29.017757] usb 1-1: clear tt buffer port 2, a4 ep3 t00808d82
[ 29.019914] pxau2o-ehci d4208000.usb: reused qh ec92a300 schedule
[ 29.019974] usb 1-1.2: link qh64-0e01/ec92a300 start 3 [1/2 us]
[ 36.312559] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 41.015326] usb 1-1.2: unlink qh64-0e01/ec92a300 start 3 [1/2 us]
[ 41.015326] usb 1-1: clear tt buffer port 2, a4 ep3 t00808d82
[ 41.018137] pxau2o-ehci d4208000.usb: reused qh ec92a300 schedule
[ 41.018193] usb 1-1.2: link qh64-0e01/ec92a300 start 3 [1/2 us]
[ 47.018022] usb 1-1.2: unlink qh64-0e01/ec92a300 start 3 [1/2 us]
[ 47.018072] usb 1-1: clear tt buffer port 2, a4 ep3 t00808d82
[ 76.247592] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 93.869745] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 103.141261] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 103.549864] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 120.862266] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 123.152021] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 123.228533] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 123.308367] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 123.367720] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 123.448025] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 123.508038] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 123.568643] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 123.628801] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 123.705539] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 123.785415] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 123.842509] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 137.480170] graphics fb0: pxa168_graphic_ioctl cmd 0x6d12
[ 141.847524] olpc-ec-1.75: got event 04
[olpc at new-host-6 ~]$ su
bash-4.2# lsusb -v
bash: lsusb: command not found
bash-4.2#
--
Ticket URL: <http://dev.laptop.org/ticket/12616#comment:5>
One Laptop Per Child <http://laptop.org/>
OLPC bug tracking system
More information about the Bugs
mailing list