#12616 NORM 13.1.0: Makey Makey board not recognized by HID on XO-4
Zarro Boogs per Child
bugtracker at laptop.org
Thu Mar 14 21:06:11 EDT 2013
#12616: Makey Makey board not recognized by HID on XO-4
---------------------------------+------------------------------------------
Reporter: mike_lee | Owner: dsd
Type: defect | Status: new
Priority: normal | Milestone: 13.1.0
Component: distro | Version: not specified
Resolution: | Keywords:
Next_action: never set | Verified: 0
Deployment_affected: | Blockedby:
Blocking: |
---------------------------------+------------------------------------------
Comment(by mike_lee):
I could not get lsusb to run.
Here is dmesg from an XO-1.5 running 12.1.0 stable with Makey Makey
plugged in:
Dup dor a'az Mubster! \_____/ Bonjour, enfants du monde!
Ciao, bambini di tutto il mondo! || o || ¡Hola, chicos del mundo!
Hallo, Kinder der Welt! |._X_.| Hallo, kinderen van de
wereld!
Hello, children of the world! //_=_=_\\ Olá, crianças do mundo!
[olpc at new-host-5 ~]$ lsusb -v
bash: lsusb: command not found
[olpc at new-host-5 ~]$ su
bash-4.2# lsusb -v
bash: lsusb: command not found
bash-4.2# dmesg
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.8_xo1.5-20120822.1309.olpc.1ce9500
(kernels at bob.laptop.org) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5)
(GCC) ) #1 PREEMPT Wed Aug 22 13:12:49 EDT 2012
[ 0.000000] OFW detected in memory, cif @ 0xff83a6f4 (reserving top
8MB)
[ 0.000000] Reserving virtual address space above 0xff800000
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e801: 0000000000100000 - 000000003b8f4400 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled:
non-PAE kernel!
[ 0.000000] DMI 2.1 present.
[ 0.000000] DMI: OLPC XO/XO, BIOS OLPC Ver 1.00.15 06/14/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] last_pfn = 0x3b8f4 max_arch_pfn = 0x100000
[ 0.000000] initial memory mapped : 0 - 01000000
[ 0.000000] Base memory trampoline at [b009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-000000003b8f4000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 003b800000 page 2M
[ 0.000000] 003b800000 - 003b8f4000 page 4k
[ 0.000000] kernel direct mapping tables up to 3b8f4000 @
ffb000-1000000
[ 0.000000] RAMDISK: 3b8f4600 - 3bdfd000
[ 0.000000] Allocated new RAMDISK: 3b3eb000 - 3b8f3a00
[ 0.000000] Move RAMDISK from 000000003b8f4600 - 000000003bdfcfff to
3b3eb000 - 3b8f39ff
[ 0.000000] ACPI: RSDP 000e0000 00024 (v02 OLPC )
[ 0.000000] ACPI: RSDT 000e0040 00034 (v01 OLPC OLPC_000 30303030
OLPC 30303030)
[ 0.000000] ACPI: FACP 000e0080 00084 (v02 OLPC OLPC_000 30303030
OLPC 30303030)
[ 0.000000] ACPI: DSDT 000fc000 023CE (v01 OLPC XO-1.5 00000001
INTL 20061109)
[ 0.000000] ACPI: FACS 000e0180 00040
[ 0.000000] ACPI: DSDT 000fc000 023CE (v01 OLPC XO-1.5 00000001
INTL 20061109)
[ 0.000000] ACPI: APIC 000e0200 0005A (v01 OLPC OLPC_000 30303030
OLPC 30303030)
[ 0.000000] ACPI: HPET 000e0280 00038 (v01 OLPC OLPC_000 30303030
OLPC 30303030)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 952MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 3b8f4000
[ 0.000000] low ram: 0 - 3b8f4000
[ 0.000000] PROM DT: Built device tree with 49152 bytes of memory.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0003b8f4
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003b8f4
[ 0.000000] On node 0 totalpages: 243843
[ 0.000000] free_area_init_node: node 0, pgdat b08a2dc4, node_mem_map
eac67200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1874 pages used for memmap
[ 0.000000] Normal zone: 237986 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] Allocating PCI resources starting at 3b8f4400 (gap:
3b8f4400:c470bc00)
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 241937
[ 0.000000] Kernel command line: console=ttyS0,115200 console=tty0
fbcon=font:SUN12x22 no_console_suspend selinux=0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 955764k/975824k available (3347k kernel code,
19608k reserved, 1428k data, 424k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff7a3000 - 0xff7ff000 ( 368 kB)
[ 0.000000] vmalloc : 0xec0f4000 - 0xff7a1000 ( 310 MB)
[ 0.000000] lowmem : 0xb0000000 - 0xeb8f4000 ( 952 MB)
[ 0.000000] .init : 0xb08ab000 - 0xb0915000 ( 424 kB)
[ 0.000000] .data : 0xb0744fdd - 0xb08aa1c0 (1428 kB)
[ 0.000000] .text : 0xb0400000 - 0xb0744fdd (3347 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=ea408000 soft=ea40a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] ODEBUG: 5 of 5 active objects replaced
[ 0.000000] ODEBUG: selftest passed
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 997.465 MHz processor.
[ 0.010004] Calibrating delay loop (skipped), value calculated using
timer frequency.. 1994.93 BogoMIPS (lpj=9974650)
[ 0.022820] pid_max: default: 4096 minimum: 301
[ 0.030222] Security Framework initialized
[ 0.034421] Mount-cache hash table entries: 512
[ 0.043650] CPU: Centaur VIA C7-M Processor 1000MHz stepping 00
[ 0.050087] ACPI: Core revision 20120111
[ 0.063824] ftrace: allocating 17985 entries in 36 pages
[ 0.100159] Performance Events:
[ 0.110283] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.116398] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.230397] devtmpfs: initialized
[ 0.234325] NET: Registered protocol family 16
[ 0.240020] OLPC board revision D5 (EC=60)
[ 0.244507] ACPI: bus type pci registered
[ 0.251483] PCI: Using configuration type 1 for base access
[ 0.261752] bio: create slab <bio-0> at 0
[ 0.266092] ACPI: Added _OSI(Module Device)
[ 0.270023] ACPI: Added _OSI(Processor Device)
[ 0.274482] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.279202] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.283361] ACPI: EC: Look up EC in DSDT
[ 0.300462] ACPI: Interpreter enabled
[ 0.304157] ACPI: (supports S0 S3 S5)
[ 0.307966] ACPI: Using IOAPIC for interrupt routing
[ 0.344341] ACPI: No dock devices found.
[ 0.348304] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.350361] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.360476] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.370008] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.376645] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.380008] pci_root PNP0A03:00: host bridge window [mem
0x000c0000-0x000dffff]
[ 0.390008] pci_root PNP0A03:00: host bridge window [mem
0xfed40000-0xfed44fff]
[ 0.397340] pci_root PNP0A03:00: host bridge window [mem
0x40000000-0xffe80000]
[ 0.400012] pci_root PNP0A03:00: host bridge window expanded to [mem
0x40000000-0xffe80000]; [mem 0x40000000-0xffe80000] ignored
[ 0.410182] PCI host bridge to bus 0000:00
[ 0.420008] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.426204] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.430007] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 0.440007] pci_bus 0000:00: root bus resource [mem
0x000c0000-0x000dffff]
[ 0.446898] pci_bus 0000:00: root bus resource [mem
0x40000000-0xffe80000]
[ 0.450053] pci 0000:00:00.0: [1106:0409] type 0 class 0x000600
[ 0.450167] pci 0000:00:00.1: [1106:1409] type 0 class 0x000600
[ 0.450268] pci 0000:00:00.2: [1106:2409] type 0 class 0x000600
[ 0.450371] pci 0000:00:00.3: [1106:3409] type 0 class 0x000600
[ 0.450471] pci 0000:00:00.4: [1106:4409] type 0 class 0x000600
[ 0.450573] pci 0000:00:00.5: [1106:5409] type 0 class 0x000800
[ 0.450709] pci 0000:00:00.6: [1106:6409] type 0 class 0x000600
[ 0.450811] pci 0000:00:00.7: [1106:7409] type 0 class 0x000600
[ 0.450912] pci 0000:00:01.0: [1106:5122] type 0 class 0x000300
[ 0.450947] pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xd3ffffff pref]
[ 0.450970] pci 0000:00:01.0: reg 14: [mem 0xf0000000-0xf0ffffff]
[ 0.451030] pci 0000:00:01.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.451070] pci 0000:00:01.0: supports D1 D2
[ 0.451136] pci 0000:00:0c.0: [1106:95d0] type 0 class 0x000805
[ 0.451170] pci 0000:00:0c.0: reg 10: [mem 0x80000000-0x800000ff]
[ 0.451194] pci 0000:00:0c.0: reg 14: [mem 0x80001000-0x800010ff]
[ 0.451218] pci 0000:00:0c.0: reg 18: [mem 0x80002000-0x800020ff]
[ 0.451299] pci 0000:00:0c.0: supports D1 D2
[ 0.451311] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.451365] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.451443] pci 0000:00:10.0: reg 20: [io 0x8000-0x801f]
[ 0.451502] pci 0000:00:10.0: supports D1 D2
[ 0.451513] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.451564] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 0.451642] pci 0000:00:10.1: reg 20: [io 0x8020-0x803f]
[ 0.451701] pci 0000:00:10.1: supports D1 D2
[ 0.451712] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.451762] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[ 0.451840] pci 0000:00:10.2: reg 20: [io 0x8040-0x805f]
[ 0.451898] pci 0000:00:10.2: supports D1 D2
[ 0.451910] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.451967] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[ 0.452004] pci 0000:00:10.4: reg 10: [mem 0x80003000-0x800030ff]
[ 0.452114] pci 0000:00:10.4: supports D1 D2
[ 0.452125] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.452179] pci 0000:00:11.0: [1106:8409] type 0 class 0x000601
[ 0.452350] pci 0000:00:11.7: [1106:a353] type 0 class 0x000600
[ 0.452448] pci 0000:00:13.0: [1106:b353] type 1 class 0x000604
[ 0.452570] pci 0000:00:14.0: [1106:3288] type 0 class 0x000403
[ 0.452603] pci 0000:00:14.0: reg 10: [mem 0x80004000-0x80007fff 64bit]
[ 0.452699] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[ 0.452837] pci 0000:00:13.0: PCI bridge to [bus 01-01]
[ 0.460029] pci_bus 0000:00: on NUMA node 0
[ 0.460048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.460754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[ 0.461132] pci0000:00: Unable to request _OSC control (_OSC support
mask: 0x08)
[ 0.500219] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.507805] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14
15) *9
[ 0.513230] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.523030] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.530513] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[ 0.539258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[ 0.544205] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[ 0.554209] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[ 0.564561] SCSI subsystem initialized
[ 0.570018] usbcore: registered new interface driver usbfs
[ 0.575573] usbcore: registered new interface driver hub
[ 0.580130] usbcore: registered new device driver usb
[ 0.585504] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.590017] PCI: Using ACPI for IRQ routing
[ 0.594222] PCI: pci_cache_line_size set to 64 bytes
[ 0.594410] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.594422] reserve RAM buffer: 000000003b8f4400 - 000000003bffffff
[ 0.595301] Switching to clocksource hpet
[ 0.600038] cfg80211: Calling CRDA to update world regulatory domain
[ 0.610433] pnp: PnP ACPI init
[ 0.613561] ACPI: bus type pnp registered
[ 0.618002] pnp 00:00: [bus 00-ff]
[ 0.618014] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.618025] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.618037] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.618050] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.618062] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.618075] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.618088] pnp 00:00: [mem 0x40000000-0xffe80000 window]
[ 0.618268] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.618691] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.618884] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.625564] system 00:01: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.625636] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.625648] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.625803] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.632461] system 00:02: [mem 0xfec00000-0xfec00fff] could not be
reserved
[ 0.639443] system 00:02: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.639521] pnp 00:03: [irq 12]
[ 0.639645] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.639701] pnp 00:04: [io 0x0060]
[ 0.639711] pnp 00:04: [io 0x0064]
[ 0.639727] pnp 00:04: [irq 1]
[ 0.639865] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[ 0.639920] pnp 00:05: [io 0x0000-0x000f]
[ 0.639931] pnp 00:05: [io 0x0081-0x0083]
[ 0.639941] pnp 00:05: [io 0x0087]
[ 0.639951] pnp 00:05: [io 0x0089-0x008b]
[ 0.639961] pnp 00:05: [io 0x008f]
[ 0.639972] pnp 00:05: [io 0x00c0-0x00df]
[ 0.639982] pnp 00:05: [dma 4]
[ 0.640100] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.640150] pnp 00:06: [io 0x0070-0x0071]
[ 0.640161] pnp 00:06: [io 0x0074-0x0075]
[ 0.640178] pnp 00:06: [irq 8]
[ 0.640284] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.640352] pnp 00:07: [io 0x00f0]
[ 0.640368] pnp 00:07: [irq 13]
[ 0.640488] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.640545] pnp 00:08: [io 0x0061]
[ 0.640653] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.650550] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.650691] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.651347] pnp 00:0a: [io 0x0010-0x001f]
[ 0.651359] pnp 00:0a: [io 0x0022-0x003f]
[ 0.651369] pnp 00:0a: [io 0x0044-0x005f]
[ 0.651380] pnp 00:0a: [io 0x0062-0x0063]
[ 0.651391] pnp 00:0a: [io 0x0065-0x006f]
[ 0.651401] pnp 00:0a: [io 0x0072-0x0073]
[ 0.651412] pnp 00:0a: [io 0x0076-0x007e]
[ 0.651422] pnp 00:0a: [io 0x0080]
[ 0.651432] pnp 00:0a: [io 0x0084-0x0086]
[ 0.651442] pnp 00:0a: [io 0x0088]
[ 0.651453] pnp 00:0a: [io 0x008c-0x008e]
[ 0.651463] pnp 00:0a: [io 0x0090-0x0091]
[ 0.651473] pnp 00:0a: [io 0x0092]
[ 0.651484] pnp 00:0a: [io 0x0093-0x009e]
[ 0.651494] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.651505] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.651516] pnp 00:0a: [io 0x0380-0x0387]
[ 0.651526] pnp 00:0a: [io 0x03e0-0x03e7]
[ 0.651537] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.651548] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.651558] pnp 00:0a: [io 0x0400-0x047f]
[ 0.651569] pnp 00:0a: [io 0x0500-0x050f]
[ 0.651580] pnp 00:0a: [mem 0xfed30000-0xfed300ff]
[ 0.651592] pnp 00:0a: [mem 0xfed30000-0xfed30fff]
[ 0.651822] system 00:0a: [io 0x0380-0x0387] has been reserved
[ 0.657773] system 00:0a: [io 0x03e0-0x03e7] has been reserved
[ 0.663745] system 00:0a: [io 0x03f8-0x03ff] has been reserved
[ 0.669686] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.675640] system 00:0a: [io 0x0400-0x047f] has been reserved
[ 0.681594] system 00:0a: [io 0x0500-0x050f] has been reserved
[ 0.687537] system 00:0a: [mem 0xfed30000-0xfed300ff] has been reserved
[ 0.694190] system 00:0a: [mem 0xfed30000-0xfed30fff] could not be
reserved
[ 0.701190] system 00:0a: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.701926] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.701939] pnp 00:0b: [mem 0x00000000-0xffffffff disabled]
[ 0.701951] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.701963] pnp 00:0b: [mem 0x00100000-0x3bffffff]
[ 0.702179] system 00:0b: [mem 0x00000000-0x0009ffff] could not be
reserved
[ 0.709168] system 00:0b: [mem 0x000e0000-0x000fffff] could not be
reserved
[ 0.716172] system 00:0b: [mem 0x00100000-0x3bffffff] could not be
reserved
[ 0.723170] system 00:0b: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.723203] pnp: PnP ACPI: found 12 devices
[ 0.727399] ACPI: ACPI bus type pnp unregistered
[ 0.772728] PCI: max bus depth: 1 pci_try_num: 2
[ 0.772782] pci 0000:00:01.0: BAR 6: assigned [mem
0x40000000-0x4000ffff pref]
[ 0.780057] pci 0000:00:13.0: PCI bridge to [bus 01-01]
[ 0.785333] pci 0000:00:13.0: setting latency timer to 64
[ 0.785349] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.785361] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.785374] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.785387] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.785401] pci_bus 0000:00: resource 8 [mem 0x40000000-0xffe80000]
[ 0.785610] NET: Registered protocol family 2
[ 0.790161] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.797978] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.808137] TCP bind hash table entries: 65536 (order: 8, 1310720
bytes)
[ 0.817257] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.823928] TCP reno registered
[ 0.827337] NET: Registered protocol family 1
[ 0.831808] pci 0000:00:01.0: Boot video device
[ 0.832030] PCI: CLS mismatch (32 != 64), using 64 bytes
[ 0.832053] pci 0000:00:13.0: disabling DAC on VIA PCI bridge
[ 0.838011] Trying to unpack rootfs image as initramfs...
[ 0.890462] Freeing initrd memory: 5156k freed
[ 0.904700] olpc-xo15-sci XO15EC:00: Initialized, GPE = 0x1
[ 1.044771] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.051537] VFS: Disk quotas dquot_6.5.2
[ 1.055518] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.062800] msgmni has been set to 1876
[ 1.066989] cryptomgr_test used greatest stack depth: 7700 bytes left
[ 1.073560] cryptomgr_test used greatest stack depth: 7684 bytes left
[ 1.080250] io scheduler noop registered
[ 1.084287] io scheduler cfq registered (default)
[ 1.089277] ioapic: probe of 0000:00:00.5 failed with error -22
[ 1.095500] VIA Graphics Integration Chipset framebuffer 2.4
initializing
[ 1.116012] gpiochip_add: registered GPIOs 250 to 255 on device: VIAFB
onboard GPIO
[ 1.623308] Console: switching to colour frame buffer device 100x40
[ 1.651805] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0D:00/input/input0
[ 1.661620] ACPI: Lid Switch [LID]
[ 1.665507] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.673434] ACPI: Power Button [PWRF]
[ 1.677588] Marking TSC unstable due to TSC halts in idle
[ 1.683397] ACPI: acpi_idle registered with cpuidle
[ 1.683811] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.990195] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.997498] Non-volatile memory driver v1.3
[ 2.002025] VIA RNG detected
[ 2.005196] Linux agpgart interface v0.103
[ 2.025395] brd: module loaded
[ 2.039909] vx855_gpio vx855_gpio: found VX855 GPIO controller
[ 2.057256] gpiochip_add: registered GPIOs 0 to 41 on device: VX855
South Bridge
[ 2.076320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.094348] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2.110917] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 1
[ 2.129744] ehci_hcd 0000:00:10.4: debug port 1
[ 2.145553] ehci_hcd 0000:00:10.4: irq 23, io mem 0x80003000
[ 2.180037] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 2.196933] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 2.214966] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.233404] usb usb1: Product: EHCI Host Controller
[ 2.249334] usb usb1: Manufacturer: Linux
3.3.8_xo1.5-20120822.1309.olpc.1ce9500 ehci_hcd
[ 2.268849] usb usb1: SerialNumber: 0000:00:10.4
[ 2.285061] hub 1-0:1.0: USB hub found
[ 2.299833] hub 1-0:1.0: 6 ports detected
[ 2.314968] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.332737] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.349154] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 2
[ 2.368021] uhci_hcd 0000:00:10.0: irq 20, io base 0x00008000
[ 2.385192] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.403434] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.422122] usb usb2: Product: UHCI Host Controller
[ 2.438047] usb usb2: Manufacturer: Linux
3.3.8_xo1.5-20120822.1309.olpc.1ce9500 uhci_hcd
[ 2.457518] usb usb2: SerialNumber: 0000:00:10.0
[ 2.473552] hub 2-0:1.0: USB hub found
[ 2.487944] hub 2-0:1.0: 2 ports detected
[ 2.502810] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.518597] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 3
[ 2.536657] uhci_hcd 0000:00:10.1: irq 22, io base 0x00008020
[ 2.552966] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.570297] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.588033] usb usb3: Product: UHCI Host Controller
[ 2.603521] usb usb3: Manufacturer: Linux
3.3.8_xo1.5-20120822.1309.olpc.1ce9500 uhci_hcd
[ 2.622538] usb usb3: SerialNumber: 0000:00:10.1
[ 2.638353] hub 3-0:1.0: USB hub found
[ 2.652870] hub 3-0:1.0: 2 ports detected
[ 2.667815] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.683589] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 4
[ 2.701624] uhci_hcd 0000:00:10.2: irq 21, io base 0x00008040
[ 2.717891] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.735241] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.753030] usb usb4: Product: UHCI Host Controller
[ 2.768577] usb usb4: Manufacturer: Linux
3.3.8_xo1.5-20120822.1309.olpc.1ce9500 uhci_hcd
[ 2.787803] usb usb4: SerialNumber: 0000:00:10.2
[ 2.803699] hub 4-0:1.0: USB hub found
[ 2.818214] hub 4-0:1.0: 2 ports detected
[ 2.832793] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 2.850231] Initializing USB Mass Storage driver...
[ 2.865756] usbcore: registered new interface driver usb-storage
[ 2.882468] USB Mass Storage support registered.
[ 2.897959] usbcore: registered new interface driver libusual
[ 2.914583] usbcore: registered new interface driver usbserial
[ 2.931002] USB Serial support registered for generic
[ 3.062150] usb 2-1: New USB device found, idVendor=1b4f,
idProduct=2b75
[ 3.079626] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.097449] usb 2-1: Product: USB IO Board
[ 3.112464] usb 2-1: Manufacturer: Unknown
[ 3.130898] usbcore: registered new interface driver usbserial_generic
[ 3.147972] usbserial: USB Serial Driver core
[ 3.162768] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 3.205232] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.221157] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.237400] rtc_cmos 00:06: RTC can wake from S4
[ 3.252940] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.269733] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet
irqs
[ 3.287375] Linux video capture interface: v2.00
[ 3.330573] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 3.571019] hwmon_vid: Using 6-bit VID table for VIA C7-M CPU
[ 3.608986] cpuidle: using governor ladder
[ 3.631992] cpuidle: using governor menu
[ 3.666574] sdhci: Secure Digital Host Controller Interface driver
[ 3.692686] sdhci: Copyright(c) Pierre Ossman
[ 3.727986] sdhci-pci 0000:00:0c.0: SDHCI controller found [1106:95d0]
(rev 10)
[ 3.760518] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 3.760553] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 3.760642] Registered led device: mmc0::
[ 3.760769] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 3.761874] mmc0: SDHCI controller on PCI [0000:00:0c.0] using DMA
[ 3.810412] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 3.810443] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 3.810525] Registered led device: mmc1::
[ 3.810607] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 3.811633] mmc1: SDHCI controller on PCI [0000:00:0c.0] using DMA
[ 3.854938] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 3.866007] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 3.866035] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 3.866117] Registered led device: mmc2::
[ 3.866195] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 3.867222] mmc2: SDHCI controller on PCI [0000:00:0c.0] using DMA
[ 3.937108] input: Unknown USB IO Board as
/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.2/input/input3
[ 3.985140] generic-usb 0003:1B4F:2B75.0001: input: USB HID v1.01 Mouse
[Unknown USB IO Board ] on usb-0000:00:10.0-1/input2
[ 4.022195] usbcore: registered new interface driver usbhid
[ 4.039278] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 4.050318] usbhid: USB HID core driver
[ 4.065414] i2c-core: driver [olpc_dcon] using legacy suspend method
[ 4.083145] i2c-core: driver [olpc_dcon] using legacy resume method
[ 4.105266] olpc-dcon: Discovered DCON version 2
[ 4.121177] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 4.180129] sdhci-pci 0000:00:0c.0: setting latency timer to 64
[ 4.269219] mmc1: new SDIO card at address 0001
[ 4.390411] input: EBook Switch as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/XO15EBK:00/input/input4
[ 4.424510] modprobe used greatest stack depth: 7064 bytes left
[ 4.442654] snd_hda_intel 0000:00:14.0: enabling device (0000 -> 0002)
[ 4.461166] snd_hda_intel 0000:00:14.0: PCI: Disallowing DAC for device
[ 4.492288] mmc2: new SDHC card at address e624
[ 4.508910] mmcblk0: mmc2:e624 SU04G 3.69 GiB
[ 4.529752] mmcblk0: p1 p2
[ 4.550430] ALSA device list:
[ 4.564571] #0: HDA VIA VT82xx at 0x80004000 irq 17
[ 4.580953] TCP bic registered
[ 4.595118] Initializing XFRM netlink socket
[ 4.610736] NET: Registered protocol family 10
[ 4.626872] Mobile IPv6
[ 4.640307] NET: Registered protocol family 17
[ 4.655673] lib80211: common routines for IEEE802.11 drivers
[ 4.672130] lib80211_crypt: registered algorithm 'NULL'
[ 4.672140] Registering the dns_resolver key type
[ 4.687433] Using IPI Shortcut mode
[ 4.702581] Freeing unused kernel memory: 424k freed
[ 4.719415] Write protecting the kernel text: 3348k
[ 4.735090] Write protecting the kernel read-only data: 1172k
[ 4.767682] init used greatest stack depth: 6988 bytes left
[ 4.785918] tmpfs: No value for mount option 'strictatime'
[ 4.802012] mount used greatest stack depth: 6880 bytes left
[ 4.829065] tmpfs: No value for mount option 'strictatime'
[ 4.861116] mount used greatest stack depth: 6732 bytes left
[ 4.880635] tmpfs: No value for mount option 'strictatime'
[ 4.938092] dracut: dracut-018-40.git20120522.fc17
[ 4.973733] udevd[59]: starting version 182
[ 4.998442] udevadm used greatest stack depth: 6624 bytes left
[ 6.556205] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data
mode. Opts: (null)
[ 6.599817] dracut: Mounted root filesystem /dev/disk/mmc/mmc2p2
[ 6.645055] EXT4-fs (mmcblk0p2): re-mounted. Opts:
user_xattr,barrier=1,data=ordered
[ 6.679452] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs,
running e2fsck is recommended
[ 6.701040] EXT4-fs (mmcblk0p1): mounted filesystem without journal.
Opts: (null)
[ 6.752375] Dsize 7744512 Psize 7605248 Pstart 139264 Pend 7744512
[ 7.553669] plymouthd used greatest stack depth: 6320 bytes left
[ 7.912687] dcon_freeze_store: 0
[ 7.916219] dcon_source_switch to CPU
[ 7.961186] olpc-dcon: The CPU has control
[ 8.001542] dracut: Switching root
[ 8.422529] systemd[1]: systemd 44 running in system mode. (+PAM
+LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
[ 8.440231] systemd[1]: Set hostname to <xo-4a-cc-9a.localdomain>.
[ 9.017130] udevd[186]: starting version 182
[ 9.905659] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 10.861186] libertas_sdio: Libertas SDIO driver
[ 10.865726] libertas_sdio: Copyright Pierre Ossman
[ 11.123316] mousedev: PS/2 mouse device common for all mice
[ 11.135672] cdc_acm 2-1:1.0: This device cannot do calls on its own. It
is not a modem.
[ 11.298810] fedora-readonly used greatest stack depth: 6228 bytes left
[ 11.319925] cdc_acm 2-1:1.0: ttyACM0: USB ACM device
[ 11.409685] usbcore: registered new interface driver cdc_acm
[ 11.508315] cdc_acm: USB Abstract Control Model driver for USB modems
and ISDN adapters
[ 11.525301] psmouse serio1: synaptics: OLPC XO detected, not enabling
Synaptics protocol.
[ 12.317094] ov7670 1-0021: chip found @ 0x42 (viafb i2c io_port idx
0x31)
[ 12.345823] usbcore: registered new interface driver sisusb
[ 12.416300] usbcore: registered new interface driver udlfb
[ 12.679828] input: PS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input5
[ 12.696027] usbcore: deregistering interface driver udlfb
[ 12.885023] runin-check: noop
[ 13.244024] libertas_sdio mmc1:0001:1: (unregistered net_device):
20:7c:8f:4a:cc:9a, fw 9.70.20p0, cap 0x000003a3
[ 13.270237] libertas_sdio mmc1:0001:1: wlan0: Marvell WLAN 802.11
adapter
[ 13.350265] udevd[216]: renamed network interface wlan0 to eth0
[ 13.376101] dcon_freeze_store: 1
[ 13.379366] dcon_source_switch to DCON
[ 13.422154] olpc-dcon: The DCON has control
[ 14.299666] input: olpc-kbdshim virtual input as
/devices/virtual/input/input6
[ 15.132524] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id:
0x92a0b1, caps: 0xa04711/0x200000/0x0
[ 15.294657] input: SynRelPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input7
[ 15.526918] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.367728] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.280253] fuse init (API version 7.18)
[ 19.368157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.420044] eth0: no IPv6 routers present
[ 30.837230] dcon_freeze_store: 0
[ 30.840829] dcon_source_switch to CPU
[ 30.877209] olpc-dcon: The CPU has control
bash-4.2# lsusb -v
bash: lsusb: command not found
bash-4.2# run lsusb -v
bash: run: command not found
--
Ticket URL: <http://dev.laptop.org/ticket/12616#comment:4>
One Laptop Per Child <http://laptop.org/>
OLPC bug tracking system
More information about the Bugs
mailing list