#10042 NORM Not Tri: XO-1 -- Can OFW be more tolerant of an external USB hub ?

[Zarro Boogs per Child]

#10042: XO-1 -- Can OFW be more tolerant of an external USB hub ?
-------------------------------------------+--------------------------------
           Reporter:  mikus                |       Owner:  wmb at firmworks.com   
               Type:  enhancement          |      Status:  new                 
           Priority:  normal               |   Milestone:  Not Triaged         
          Component:  ofw - open firmware  |     Version:  Development firmware
         Resolution:                       |    Keywords:                      
        Next_action:  never set            |    Verified:  0                   
Deployment_affected:                       |   Blockedby:                      
           Blocking:                       |  
-------------------------------------------+--------------------------------

Comment(by Quozl):

 Mikus, please test for the symptom ''failure to boot automatically with
 hub, keyboard and trackball attached'' again with
 http://dev.laptop.org/~wmb/q2e42e.rom

 I've tested with a hub.  It works fine on Q3A33d with XO-1.5.  On Q2E42e
 it generates an error during boot but does not prevent boot:

 {{{
 +
 Forthmacs
 Type 'i' to interrupt stand-init sequence

 Failed to set device address: 2
 Retrying with a delay
 Failed to set device address: 2
 USB2 devices:
 /pci/usb at f,5/wlan at 0,0
 USB1 devices:
 OLPC C2, 256 MiB memory installed, S/N SHC92805B50
 OpenFirmware  CL1   Q2E42e Q2E   EC Firmware PQ2E34

 Type the Esc key to interrupt automatic startup
 }}}

 The same error but with different device addresses is also generated
 independently of boot using probe-usb.

-- 
Ticket URL: <http://dev.laptop.org/ticket/10042#comment:1>
One Laptop Per Child <http://laptop.org/>
OLPC bug tracking system