#10314 HIGH Not Tri: XO-1.5 won't boot
Zarro Boogs per Child
bugtracker at laptop.org
Mon Aug 23 17:01:46 EDT 2010
#10314: XO-1.5 won't boot
-------------------------+--------------------------------------------------
Reporter: wad | Owner: wad
Type: defect | Status: new
Priority: high | Milestone: Not Triaged
Component: hardware | Version: 1.5-C2
Keywords: XO-1.5 boot | Next_action: diagnose
Verified: 0 | Deployment_affected:
Blockedby: | Blocking:
-------------------------+--------------------------------------------------
Several XO-1.5 laptops have stopped booting. The EC boots fine, and the
power light turns on when the power button is pressed, but there are no
signs of CPU life: 1) the display flickers but is never turned on 2)
there is no boot sound 3) there is no output on the CPU serial port.
The three units I'm currently seeing this on are:
A B2 prototype, serial number SHC93701195, received from Tiago Marques.
Report from the user stated:
"My XO-1.5 B2 just entered this state last night. The only difference is
that I was using it, writing e-mail, and then it rebooted itself. After
that it would no longer boot so I tried to run memtest. It crashed on the
second test with a random character on the right side of the screen and
then it would no longer boot, the screen just flashes."
A C2 ramp laptop, serial number SHC00500908, received from George
Mavrothalassitis. Report from the user stated:
"The XO was OK running OS203. I clean installed os205 with the A/C
plugged in. On first boot (AC on) it froze about 4 sec. into the boot
process, I _think_ at "...mass storage devices" on the console. Mic or
camera lights were _not_ on. On hard reboot (with the power button for 5
sec.) the backlight blinks for a split second but the screen stays dark.
The power light coms on but not the processor and wifi lights. No chime
either. This remains the case for all consecutive boot-ups."
A C2 ramp laptop, serial number SHC005007AB, used at 1CC for SD card
testing. One morning, it decided to stop booting. (This unit was
operated without a back panel installed, and may have been damaged through
ESD.)
At first glance, these motherboards seem OK. All power supplies are
producing the right voltages, and power sequencing to the processor
(+1.8V, VCCP, VCORE, along with CPURST and CPUPWRGD)
looks OK. The clock to the processor is present and roughly correct
(although it's exact frequency wasn't checked).
--
Ticket URL: <http://dev.laptop.org/ticket/10314>
One Laptop Per Child <http://laptop.org/>
OLPC bug tracking system
More information about the Bugs
mailing list