[Testing] Testing Summary, Auckland - 28 April 2012

[Walter Bender]

On Sun, May 20, 2012 at 11:52 PM, Walter Bender <walter.bender at gmail.com> wrote:
> On Sun, May 20, 2012 at 11:10 PM, Walter Bender <walter.bender at gmail.com> wrote:
>> On Sun, May 20, 2012 at 10:00 PM, Walter Bender <walter.bender at gmail.com> wrote:
>>> On Sat, May 19, 2012 at 12:32 PM, Daniel Drake <dsd at laptop.org> wrote:
>>>> On Sat, Apr 28, 2012 at 4:17 PM, Tom Parker <tom at carrott.org> wrote:
>>>>> Details:
>>>>> One of our XO-1.5s refused to fs-update os8, complaining about something to
>>>>> do with the first block and erasing or something. Unfortunately I observed
>>>>> this a few days ago and then when I came to re-visit, os8 just installed on
>>>>> all the XOs, so I don’t know what happened there.
>>>>
>>>> Next time you see a fs-update related problem please note the firmware version.
>>>>
>>>> I suspect what might have happened is that the flash completed but it
>>>> printed a misleading error (old firmware version).
>>>> Then you rebooted, it upgraded the firmware, and when you tried again
>>>> you were running a fixed firmware version.
>>>>
>>>>> poppy-copy (XO-1.5 B2) failed to boot after installing os8 complaining about
>>>>> read only filesystems. re-flashing did not help. I haven’t looked in to this
>>>>> in any detail.
>>>>
>>>> Would be interested in serial console logs from boot if you have time.
>>>>
>>>>> rosella (XO-1.5) has very very small fonts on os8, even after a reboot
>>>>
>>>> Where do you observe the small fonts? Can you post a screenshot?
>>>>
>>>>> Ivy (XO-1.5) had a very bad resume from suspend, the laptop locked up for so
>>>>> long I thought it had crashed. I was about to hard reset it when processed
>>>>> some of my keyboard input and locked again. Eventually it started behaving
>>>>> normally but there was no eth0 for a few more minutes. After this it
>>>>> appeared to happy. I have the whole /var/log/messages if anyone wants it,
>>>>> relevant excerpt here:
>>>>
>>>> We have some issues with libertas on suspend/resume, hopefully to be
>>>> fixed soon. Please keep testing.
>>>>
>>>
>>> I've patched Measure to fix the problem with rapid pressing of the
>>> radio buttons.
>>>
>>>>> Measure’s trigger doesn’t seem to work at all now. Also, if you reduce
>>>>> either gain to zero the display stops updating until you turn off the
>>>>> trigger.
>>>
>>> Will investigate this as per #2203

I think #2203 is fixed as well. Please test.

regards.

-walter

>>
>> The freezing was due to a zero-dvide error. Still investigating the trigger bug.
>
> Found a typo introduced a while back that had broken triggering. The
> current version in git should work, but #2203 is not necessarily
> fixed.
>
> Question: When I test on 1.75, I am only seeing data on one channel,
> even in analog sound mode. Are you seeing the same?
>
> -walter
>
>>
>> -walter
>>>
>>>>> Restoring the gain does not help. Measure uses about 15% cpu even
>>>>> when it is hidden, maybe it should stop processing when in the background?
>>>
>>> Not clear that we want to do this if data is being captured. I suppose
>>> I could check to see it capture is enabled and only hold onto the
>>> device if it is.
>>>
>>>>>
>>>>> The record feature doesn’t seem to do anything.
>>>>>
>>>>> Measure’s page on aslo points to http://wiki.laptop.org/go/Measure which
>>>>> claims to be out of date and points back to aslo. Is there any up-to-date
>>>>> documentation?
>>>>
>>>> Walter, please test/comment.
>>>>
>>>> Thanks,
>>>> Daniel
>>>
>>>
>>>
>>> --
>>> Walter Bender
>>> Sugar Labs
>>> http://www.sugarlabs.org
>>
>>
>>
>> --
>> Walter Bender
>> Sugar Labs
>> http://www.sugarlabs.org
>
>
>
> --
> Walter Bender
> Sugar Labs
> http://www.sugarlabs.org



-- 
Walter Bender
Sugar Labs
http://www.sugarlabs.org