[Testing] [OLPC-AU] Testing summary, Auckland - 24 March 2012
Jerry Vonau
jvonau at shaw.ca
Sun Mar 25 17:25:58 EDT 2012
On Sun, 2012-03-25 at 23:46 +1300, Tom Parker wrote:
> Testing Summary, Auckland - 24 March 2012
> Who: Fabiana, John, Oliver, Rachel, Tabitha, Tom
>
> Tested os884 on XO-1.75 and au-210 on XO-1.5
>
> os884 on XO-1.75
> Sundance:
> Record:
> Movie 2 min on low res ok - Movie a bit too pixelated when you open the
> saved version (did not show that pixelation during the recording)
> otherwise seems ok. Movie on high res 2 min stops after about 15 seconds
> - Movie is choppy during recording and play back - frames freeze.
>
> Measure:
> Wave and FFT ok. Amplitude and time control seem fine - except that FFT
> behaves quite funny when the x rate is set to 1 div 10 Hz. The update
> rate isn’t constant, if you make a loud short “hiss” noise, some kind of
> animal slowly rises out of the noise floor, arches it’s back and shakes
> like a dog before receding. Tapping the side of the laptop also arouses
> this beast. This isn’t new, I’ve seen it on XO-1.5 too. Behavior at
> 100hz/div is very good, and suits my whistling range much better than
> the default.
>
> Physics:
> Seems to be working ok.
>
> Write:
> Can change font - Fonts at the end of list beginning with ‘C’ should
> they be alphabetically organised? Can do bullet points etc.; headings,
> alignment, insert table and change cell aspect ratio; bold underline,
> italics, copy paste.
>
> Labyrinth:
> Can create, save into pdf and open with read and save into png and view
> with picture viewer (png).
>
> Tam Tam Edit:
> Seems to be working ok.
>
> Paint:
> Drew a complicated drawing and it hung. Unfortunately the wifi also
> didn’t work so couldn’t install gdb to investigate. Paint was using 100%
> CPU. This is the second time we have had paint hang in the last couple
> of weeks. Wifi started working after a reboot. Lost the logs related to
> the wifi, /var/log/message and /var/log/wpa_supplicant got cleared
> during reboot.
>
That is by upstream's design, /var/log is on a tmpfs and its contents
are lost on a reboot.
> Sundance hung while idle with the power light on solid, had to hold down
> the power button.
>
> Bonnie:
> Tried to break paint but couldn’t.
>
> Clyde:
> Did not auto-mount usb sticks, they show up in dmesg and you can
> manually mount. nothing obvious in logs. Worked normally after reboot.
>
> http://dev.laptop.org/ticket/11569 still a problem
> http://dev.laptop.org/ticket/11596 still a problem -- we should fix this
> or remove distance from the XO-1.75
> Raised http://dev.laptop.org/ticket
> <http://dev.laptop.org/ticket/11569>/11715 for maze crashing
>
> au210:
> Record:
> Screen no longer dims and blanks when recording and laptop is left
> alone. Record functions seem to work well, but low quality video is very
> very low quality. Should the default be changed?
>
Good to hear, did you have any issues during playback?
> Write:
> Tables, fonts, sizes and stuff all work
>
> Browse:
> Works
>
> Rosella with sentelec FSP had the mouse stop working. Keyboard worked,
> suspending and resuming did not help, switching to text console did not
> help. Got error in kernel log:
>
How long did this take to occur after boot?
> Mar 24 11:00:35 xo-a7-4c-2f NetworkManager[805]: <info> Activation
> (eth0) successful, device activated.
> Mar 24 11:00:35 xo-a7-4c-2f NetworkManager[805]: <info> Activation
> (eth0) Stage 5 of 5 (IP Configure Commit) complete.
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3360.930121] INFO: task kseriod:16
> blocked for more than 120 seconds.
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3360.954242] "echo 0 >
> /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3360.979924] kseriod D f1a7e6c7
> 2812 16 2 0x00000000
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.003861] eb4c2ec8 00000046
> 00000000 f1a7e6c7 000002e6 eb490a00 eb490a00 f1a7a1fe
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.029819] 000002e6 eb490a00
> ea9c1e0c eb490a00 ea9c1e10 eb4c2eec b070ca7a ea9c1e20
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.055744] ea9c1e20 ea9c1e20
> eb490a00 ea9c1e0c 00000064 ffffffff eb4c2ef8 b070cd79
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.081438] Call Trace:
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.100734] [<b070ca7a>]
> __mutex_lock_slowpath+0x6d/0xc8
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.122995] [<b070cd79>]
> mutex_lock+0x27/0x2a
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.144076] [<b05fdd0e>]
> ps2_begin_command+0x13/0x26
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.165828] [<b05fdd3b>]
> ps2_command+0x1a/0x38
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.187111] [<f13024c2>]
> psmouse_set_rate+0x34/0x43 [psmouse]
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.209986] [<f13024f1>]
> psmouse_initialize+0x20/0x40 [psmouse]
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.232885] [<f1303c41>]
> psmouse_reconnect+0xc1/0xfc [psmouse]
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.255439] [<b05fbbd0>]
> serio_reconnect_port+0x2f/0x51
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.277148] [<b05fbc04>]
> serio_reconnect_chain+0x12/0x20
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.298858] [<b05fbfdd>]
> serio_thread+0x103/0x276
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.320106] [<b0435b41>] ?
> autoremove_wake_function+0x0/0x34
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.342304] [<b05fbeda>] ?
> serio_thread+0x0/0x276
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.363278] [<b0435850>]
> kthread+0x63/0x68
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.383324] [<b04357ed>] ?
> kthread+0x0/0x68
> Mar 24 11:01:22 xo-a7-4c-2f kernel: [ 3361.403482] [<b0402cf6>]
> kernel_thread_helper+0x6/0x10
> Mar 24 11:02:34 xo-a7-4c-2f kernel: [ 3433.983953] PM: Syncing
> filesystems ... done.
> Mar 24 11:02:40 xo-a7-4c-2f kernel: [ 3434.006548] Freezing user space
> processes ... (elapsed 0.01 seconds) done.
>
I get a funny feeling that the FSP fix that went into olpc-utils needs
to be re-run after a suspend/resume cycle. Powerd has a build-in
workaround for the original ALPS touchpads, but I think I could run
'/usr/bin/olpc-fsp-regs set' from powerd's postresume hooks.
> XO-1.5 Ivy
> GCompris click:
> took forever to load
>
> labyrinth:
> image breaks it
>
> speak, memorize, implode, maze, record, write, paint, browse, ruler,
> clock, moon, visual match, fototoon, numbers, physics, arithmetic:
> All worked.
Thanks for the feedback,
Jerry
More information about the Testing
mailing list