[Testing] [support-gang] Lost Communication in 10.1.3?

[Caryl Bigenho]

OK I think I know what happened.  First a question... how will the ad hoc networks look on the XO-1?  They were still targets on these.  Maybe I grabbed the wrong usb stick and put 10.1.2 on them again... but I don't think so.  

I didn't see any parenthesis... just that the 2 XO-1s could see each other fine, but they couldn't see the 1.5s, even with sharing on.  I started the Chat on a 1.5.  Maybe it has to start on a 1.0?

Caryl

> Date: Sun, 6 Feb 2011 12:52:01 -0500
> Subject: Re: [Testing] [support-gang] Lost Communication in 10.1.3?
> From: gerald.ardito at gmail.com
> To: cbigenho at hotmail.com
> CC: gerald.ardito at gmail.com; support-gang at lists.laptop.org; devel at lists.laptop.org; testing at lists.laptop.org; support-gang at laptop.org
> 
> Caryl,
> 
> Once you connect to one of the ad-hoc networks, you will see the
> familiar parentheses surrounding it. Then, in the Neighborhood View on
> the the XOs, this network should appear as a wireless device.
> 
> I would start troubleshooting by going o Settings and turning the
> radio off and then on again.
> 
> Good luck.
> 
> Gerald
> 
> On Sunday, February 6, 2011, Caryl Bigenho <cbigenho at hotmail.com> wrote:
> >
> >
> >
> >
> >
> > Hi Gerald,
> >
> > That was the first thing I tried and it didn't work for me.  I'll try it again when I get back from TX.  How did you connect the 1.0 to the network?  They are still showing as access points rather than the Mayan numerals on the 1.0s.  Maybe I need to do the install again.
> >
> > Caryl
> >
> >> Date: Sun, 6 Feb 2011 11:39:38 -0500
> >> From: gerald.ardito at gmail.com
> >> To: support-gang at lists.laptop.org
> >> CC: devel at lists.laptop.org; testing at lists.laptop.org; support-gang at laptop.org
> >> Subject: Re: [Testing] [support-gang] Lost Communication in 10.1.3?
> >>
> >> Caryl,
> >>
> >> I have been able to make this work. Here's what I did:
> >> 1. Create an ad-hoc network on one of the 1.5s.
> >> 2. Connect to it on the 1.0s.
> >> 3. Open Chat and make public.
> >>
> >> Hope this helps.
> >> Gerald
> >>
> >> On Sunday, February 6, 2011, Caryl Bigenho <cbigenho at hotmail.com> wrote:
> >> >
> >> >tee's what I
> >> >
> >> >
> >> >.
> >>
> >> H
> >> > Hi...
> >> >
> >> > Prepping some XOs for our booth at SCaLE 9X Feb 26-27.  When I first started charging and testing I was running 10.1.2.  I tried Chat and found that the XO-1s could easily chat with the XO-1.5s.
> >> >
> >> > Then I updated all of them to 10.1.3, and this ability seems to have been lost.  While the XO-1.5s connected right away to the ad hoc network, the XO-1s were totally left out.  They can only see each other.
> >> >
> >> > Is this an intentional change?  Is there a way for both models to communicate among themselves in 10.1.3?
> >> >
> >> > Caryl 		 	   		
> >> >
> >> _______________________________________________
> >> Testing mailing list
> >> Testing at lists.laptop.org
> >> http://lists.laptop.org/listinfo/testing
> >  		 	   		
> >
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.laptop.org/pipermail/testing/attachments/20110206/732b0cee/attachment.htm