[sugar] [RELEASE] sugar 0.82.1

Thu Aug 28 10:55:34 EDT 2008

= Sources =

http://dev.laptop.org/pub/sugar/sources/sugar/sugar-0.82.1.tar.bz2

= Closed tickets =

* #2866 Network Manager GUI doesn't report success or failure
* #3993 The color of network icon in Home view becomes white after
restarting Sugar.
* #2866 Network Manager GUI doesn't report success or failure
* #7988 Sugar control panel doesn't have a language entry for kreyol
* #7823 Non-modal alerts in CP remain when they shouldn't
* #7733 Cannot install Wikipedia-10.xo
* #7356 regression in activity view performance.
* #7660 XO Neighborhood icon drawing & erase glitches
* #6605 Screen rotates clockwise, while rotation button shows counter
clockwise arrows
* #7877 Control Panel / Data & Time: Selecting timezone by typing locks up UI
* #7965 Mirror activities list in RTL locales
* #7220 Mark newly downloaded activities as favorites by default
* #7874 Search entry in Home focuses list view when cleared
* #7971 CP fails to validate all settings correctly
* #7970 Some CP modules set needs_restart to False when they shouldn't
* #7764 Reset Registration with school servers - short term solution
* #7823 Non-modal alerts in CP remain when they shouldn't
* #7874 Search entry in Home focuses list view when cleared
* #7730 Clicking on Speaker icon should Mute/Unmute Sound
* #4656 Non-olpc buddies not shown in the meshview (using salut)
* #7873 Search entry in Home should be focused implicitly

= Testcases =

#2866

Associate with an access point / mesh. Expose frame and hover over the
frame icon representing the AP/mesh. When the secondary palette appears,
verify the correct IP address is shown there.

|TestCase|

Change to the neighborhood view. Expose the frame via the frame key.
Click on an access point / mesh icon. Observe the resulting frame icon -
it should pulse as the Neighborhood icon is. When the connection is
established, confirm the frame icon stops pulsing and becomes "solid".

#3993

Associate with an AP/mesh. Observe the frame icon - it should be
coloured. Restart Sugar (Ctrl-Alt-Erase) without disassociating. When
sugar restarts, observe the frame icon again - it should be coloured
(the same).

#2866

Associate with an access point / mesh. Expose frame and hover over the
frame icon representing the AP/mesh. When the secondary palette appears,
verify the correct IP address is shown there.

|TestCase|

Change to the neighborhood view. Expose the frame via the frame key.
Click on an access point / mesh icon. Observe the resulting frame icon -
it should pulse as the Neighborhood icon is. When the connection is
established, confirm the frame icon stops pulsing and becomes "solid".

#7823

Open the control panel and go to the frame section. Change a slider. Hit
the accept button. An alert will appear and both the cancel and the
accept button should be not sensitive. Hit Later. Go back to the frame
section. Both buttons should be sensitive again.

#7823

open the aboutme section in the control panel. remove all of the nick.
The 'valid' button will be insensitive since you must enter a valid nick
name. Hit 'cancel'. Open the aboutme section again. The 'valid' button
should be sensitive again.

#7874

Enter a search query in the list view of Home, to filter the
list. Return to the favorites view via the button in the toolbar. Clear
the search entry and verify that the favorite view remains focused (you
are not returned to list view). Then, manually return to the list view
via the button in the toolbar and verify that the list is again
unfiltered, showing all installed activities.

#7764

connect to a schoolserver using the 'Register' option in the xo-palette
on the home-view. open a terminal activity and use the command line
interface of the control panel to reset the registration
'sugar-control-panel -c registration'. After restarting sugar try to
connect to the schoolserver again.

#7823

Open the control panel and go to the frame section. Change a slider. Hit
the accept button. An alert will appear and both the cancel and the
accept button should be not sensitive. Hit Later. Go back to the frame
section. Both buttons should be sensitive again.

#7823

open the aboutme section in the control panel. remove all of the nick.
The 'valid' button will be insensitive since you must enter a valid nick
name. Hit 'cancel'. Open the aboutme section again. The 'valid' button
should be sensitive again.

#7874

Enter a search query in the list view of Home, to filter the
list. Return to the favorites view via the button in the toolbar. Clear
the search entry and verify that the favorite view remains focused (you
are not returned to list view). Then, manually return to the list view
via the button in the toolbar and verify that the list is again
unfiltered, showing all installed activities.

#7730

Reveal the frame, ensure the volume is non-zero, and click
the speaker icon. It should become muted (turn white) and volume should
be muted.

|TestCase|

Hide the frame, change the volume with the keyboard, and reveal the
frame. The speaker icon should be unmuted. Hide the frame, reduce the
volume all the way down to zero, and reveal the frame. The speaker icon
should be muted. Click on it, and the speaker icon should become unmuted
(but the volume will remain at zero, which is correct).