<div dir="ltr"><div><div>Might anyone know why the VGA (or Mini DisplayPort) cable can never be unplugged from CentOS 7.2 (even for a second, forcing you to somehow reboot[*] if you want to restore video) but yet this ain't a problem on Fedora 22 and similar -- as I've demonstrated with several units of the same very NUC6i3SYH hardware, and also on 4th gen NUC D34010WYKH ?<br></div><div><br></div>I do understand that CentOS 7.2 is largely based on Fedora 19 from July 2013, whereas Fedora 22 was released almost 2 years later May 2015 -- but the ability to attach/reconnect any VGA monitor at any time is something most PC's could handle over recent decades (even after boot, or if the VGA cable falls off for a second, etc).<br><br>Might there be a way to make the VGA  (or Mini DisplayPort) cable less fragile within CentOS 7 on Intel NUC's, or some setting within CentOS 7 that might have gone wrong?  Aside: I used Jerry Vonau's pre-XSCE-6.1 ISO from July to install CentOS 7.2 in this case.  No worries if conversely this is a CentOS 7 bug/quirk we just have to live with; still as a major annoyance during in-person debugging/support, I thought I'd ask!<br><br></div>[*] or worse, earlier today one CentOS7 NUC did not bring up video 4 reboots in a row -- it was only by ssh'ing in remotely to this NUC that I was able to restore video/monitor output, after typing "reboot" at the prompt (something that a rural/impoverished deployment would never do, realistically!)  In most cases, a couple forced poweroffs do the job of restoring video output (touching the NUC's power button turns it off within 2 seconds generally -- if the NUC does not produce video output on the next boot, then FYI the 2nd boot (almost) always works.<br></div>