[Server-devel] [XSCE] Re: Cubox Solidrun Prototype Packaging

Jon Nettleton jon.nettleton at gmail.com
Sat Jan 4 12:15:06 EST 2014


Those and some sheet metal screws or pop rivets look about perfect to me.


On Sat, Jan 4, 2014 at 6:13 PM, Tim Moody <tim at timmoody.com> wrote:

>
> http://www.markertek.com/Connectors-Adapters/Data-Connectors-Adapters/RJ45-CAT5-and-CAT6-Connectors/Switchcraft-Corporation/EHRJ45P5E.xhtmlor someplace else to find a cat5e case mountable receptacle.
>
> Tim
>
>  *From:* Tim Moody <tim at timmoody.com>
> *Sent:* Saturday, January 04, 2014 11:50 AM
> *To:* George Hunt <georgejhunt at gmail.com> ; Jon Nettleton<jon.nettleton at gmail.com>
> *Cc:* XS Devel <server-devel at lists.laptop.org> ; xsce-devel<xsce-devel at googlegroups.com>
> *Subject:* [XSCE] Re: Cubox Solidrun Prototype Packaging
>
>   My first question is are we trying to run off AC or 12V DC.  If the
> latter, do we need a 12V connector and wires to split for the cubox and the
> drive?
>
> I was also assuming we would use a conventional 2.5” sata drive with a
> sata to esata connector cable.
>
> My custom case at home brings motherboard usb to an external connector and
> I’m guessing that ..231 does the same.  It would be nice if there were an
> rj45 connector on the chassis that could pass through the ethernet from the
> cubox.
>
> Tim
>
>  *From:* George Hunt <georgejhunt at gmail.com>
> *Sent:* Saturday, January 04, 2014 10:44 AM
> *To:* Jon Nettleton <jon.nettleton at gmail.com>
> *Cc:* Tim Moody <tim at timmoody.com> ; XS Devel<server-devel at lists.laptop.org>;
> xsce-devel <xsce-devel at googlegroups.com>
> *Subject:* Re: Cubox Solidrun Prototype Packaging
>
>  My experience tells me that connectors are the weak link in most
> systems.  So I'm not excited about a connector that is part of the
> essential data path, exiting the enclosure and exposed to being
> bumped/damaged.
>
> Jon, I'd really like to start working on your kernel, and getting it to
> play nicely with the XSCE. Is that possible? soon?
>
>
> On Sat, Jan 4, 2014 at 10:14 AM, Jon Nettleton <jon.nettleton at gmail.com>wrote:
>
>> I figured we just put the cubox at the back of the case for now and loop
>> the esata cable back around into the box to hook up the drive.  Is there
>> any reason to even worry about making the hdmi cable available?  In the
>> back of my head I do have a dream where the XSCE could sit attached to a
>> monitor/projector for teaching materials, but that seems far enough out not
>> to worry about it.
>>
>> What does everyone else think?  You guys obviously have more "in the
>> field" experience than myself.  Those sorts of cases just seemed like a
>> relatively cheap solution to a problem that was brought up.
>>
>> I did talk with Rabeeh about the cooling for the i4pro and he said the
>> external case didn't need any sort of special cooling it just radiates as
>> is and should be fine completely enclosed.  There is actually a team that
>> is building an i4pro into their RC surveillance plane :-)  My i4pro should
>> be here this coming week and I can box it up, stress test it, and monitor
>> thermals from the on-board sensor as well as my IR thermometer to make sure
>> things look reasonable.
>>
>>
>>
>> On Sat, Jan 4, 2014 at 3:48 PM, George Hunt <georgejhunt at gmail.com>wrote:
>>
>>> What's the best strategy long term? The cubox has all its connectors on
>>> one face. Most of these need to be available to the outside. We can open
>>> the cubox and solder a esata connector that comes out the back. Picture is
>>> at http://imx.solid-run.com/wiki/index.php?title=CuBox-i_Hardware.
>>>
>>> Or we can try to project the essential stuff from the cubox mounted
>>> internally, and not really accessible from the outside.  The second item
>>> ending in 231 looks like it has pigtails to project the usb to the
>>> outside.  We'd need to do the same for the internal ethernet adapter. This
>>> approach still leaves the hdmi, and console usb that might need to be
>>> available occasionally.
>>>
>>> So maybe in the long run, we need something intermediate between the two
>>> Jon has suggested, so that when it is necessary, we can get a hand into the
>>> box to make insert the hdmi or console cables.
>>>
>>> I'm in favor with going with number ..231 this time around.
>>>
>>>
>>>
>>>
>>> On Sat, Jan 4, 2014 at 8:56 AM, Jon Nettleton <jon.nettleton at gmail.com>wrote:
>>>
>>>> Well from taking some basic measurements I was thinking we could pack a
>>>> 2.5" sata drive and connector along with the cubox into a 5.25 external
>>>> case like this
>>>> http://www.newegg.com/Product/Product.aspx?Item=N82E16817145090  That
>>>> with a few dremel modifications and some soldering I think it would make a
>>>> nice compact holder.  Given the time constraints that is probably not
>>>> happening.  I did look around and found this which is more than enough
>>>> space to do whatever is needed without much more cost,
>>>> http://www.newegg.com/Product/Product.aspx?Item=N82E16811163231  It
>>>> also has excellent ventilation.
>>>>
>>>> Of course these are just suggestions to help create a more
>>>> self-contained product right now.
>>>>
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.laptop.org/pipermail/server-devel/attachments/20140104/14479b2b/attachment-0001.html>


More information about the Server-devel mailing list