[Server-devel] [XSCE] cubox wifi

Jon Nettleton jon.nettleton at gmail.com
Mon Feb 24 09:38:34 EST 2014

Finally out and ready for use.


All the hardware is functional at this point.  The wifi driver is a
bit chatty and needs a bit more love for AP mode.  Everything else
from crypto to esata should be good to go.


On Sun, Feb 23, 2014 at 5:28 PM, Jon Nettleton <jon.nettleton at gmail.com> wrote:
> It was probably a UHS capable card.  We found some hardware design
> problems that will need to be rectified to support UHS speeds for the
> sdcard.  For now we will be limiting the card-slot to standard SD high
> speed modes of 50Mhz which equates to around 20MB/s
> On Sun, Feb 23, 2014 at 5:12 PM, Tim Moody <tim at timmoody.com> wrote:
>> sounds great.  one thing I noticed in Haiti was that I could not get a 16G
>> sd card to be recognized.  is this expected or was it my card?
>> Tim
>> -----Original Message----- From: Jon Nettleton
>> Sent: Sunday, February 23, 2014 11:03 AM
>> To: xsce-devel
>> Cc: server-devel at lists.laptop.org
>> Subject: Re: [XSCE] cubox wifi
>> Tim,
>> Actually the 3.10 kernel is done.  The wifi driver is a little chatty
>> and I will work on sorting that out but it is functional.  I am just
>> cleaning up the last few patches and will be pushing the kernel for
>> initial testing in a few hours.
>> -Jon
>> On Sat, Feb 22, 2014 at 5:34 PM, Tim Moody <tim at timmoody.com> wrote:
>>> Jon,
>>> Can you (or anyone else) tell me where to find the drivers for the cubox
>>> wifi adapter you mentioned on the call on Tue.
>>> Thanks,
>>> Tim

More information about the Server-devel mailing list