[Server-devel] XS 0.5 Second Attempt at eth1

[Jerry Vonau]

Reuben K. Caron wrote:
> I too am having problems with DHCP (and ejabberd) on XS 0.5.
> 
> Let me detail my steps
> 
> Appended upgradeany- ran default install
> Restarted
> NICs were swapped.
> Ran xs-swapnics
> 
> Check var/log/messages found (snipet):
> 
> Dec  4 09:36:58 schoolserver1 dhcpd: Listening on
> LPF/lanbond0/00:00:00:00:00:00/172.18.96.0/19
> Dec  4 09:36:58 schoolserver1 dhcpd: Sending on  
> LPF/lanbond0/00:00:00:00:00:00/172.18.96.0/19
> ----
> 
> Dec  4 09:06:24 schoolserver1 dhcpd: No subnet declaration for lanbond0
> (172.18.96.1).
> Dec  4 09:06:24 schoolserver1 dhcpd: ** Ignoring requests on lanbond0. 
> If this is not what
> Dec  4 09:06:24 schoolserver1 dhcpd:    you want, please write a subnet
> declaration
> Dec  4 09:06:24 schoolserver1 dhcpd:    in your dhcpd.conf file for the
> network segment
> Dec  4 09:06:24 schoolserver1 dhcpd:    to which interface lanbond0 is
> attached. **
> 
> Reviewed dhcpd-xs.conf file: It did not have a declaration for 172.18.96.*
> 
> I reviewed /etc/sysconfig/olpc-scripts/dhcpd.conf.1 - It did not match
> dhcpd-xs.conf
> 
> I ran ./network-config 1
> I ran ./domain-config xs4.org (i know it isn't xs4 but I'm maintaining
> domain for posterity)
> 
> Rebooted.
> 
> dhcpd-xs.conf now has the declaration for 172.18.96
> 
> DHCP is started but still does not hand out an IP.
> 
> Below are ethtool outputs:
> 
> [root at schoolserver1 log]# ethtool eth1
> Settings for eth1:
>     Supported ports: [ TP ]
>     Supported link modes:   10baseT/Half 10baseT/Full
>                             100baseT/Half 100baseT/Full
>                             1000baseT/Half 1000baseT/Full
>     Supports auto-negotiation: Yes
>     Advertised link modes:  10baseT/Half 10baseT/Full
>                             100baseT/Half 100baseT/Full
>                             1000baseT/Half 1000baseT/Full
>     Advertised auto-negotiation: Yes
>     Speed: 100Mb/s
>     Duplex: Full
>     Port: Twisted Pair
>     PHYAD: 1
>     Transceiver: internal
>     Auto-negotiation: on
>     Supports Wake-on: g
>     Wake-on: d
>     Current message level: 0x000000ff (255)
>     Link detected: yes
>

OK, is starting to look like the 1000baseT nics are having issues with 
bonding, can you try the fix I proposed to Anna.

Jerry