wad at laptop.org
Fri Jun 29 15:32:15 EDT 2007
Here is a list of the indicators planned for the school server.
I keep meaning to put it on the Wiki, but might as well get comments
before posting it there.
System status (green/red)
WAN status (green/red)
Mesh activity 0 (green)
Mesh activity 1 (green)
Mesh activity 2 (green)
LAN port 0 activity (green)
LAN port 1 activity (green)
LAN port 2 activity (green)
LAN port 3 activity (green)
LAN port 4 activity (green)
LAN port 5 activity (green)
Disk 1 status (green/red)
Disk 2 status (green/red)
All LEDs (and a reset pushbutton) are on the front of the server.
The Power and LAN activity LEDs will be driven directly by hardware.
There are no LEDs located on the RJ-45 connectors, as they are
placed in a location where no one would ever see them.
The system status LED, in conjuction with the Mesh and Disk LEDs, will
be used to indicate POST codes.
System status = green
-> successful POST and boot
Mesh and Disk LEDs indicate Mesh/Disk activity
System status = yellow
-> system POST/boot in progress
Mesh and Disk LEDs indicate progression (32 steps possible)
System status = red
-> system POST failure
Mesh and DISK LEDs indicate last succesful test (same codes as
Comments ? Suggestions ?
More information about the Server-devel