[Server-devel] Re: MPP port selection

[Luis Carlos Cobo Rus]

On 3/31/07, Dan Williams <dcbw at redhat.com> wrote:
> On Sat, 2007-03-31 at 21:07 -0700, Luis Carlos Cobo Rus wrote:
> > Hi John,
> >
> > there's nothing special about the port or anycast IP, we only need
> > them to be consistent between MPPs and clients.

Actually, the anycast IP has to be in the same subnet as the IPs on
the mesh, or it won't be sent through the mesh interface. Another
option is to set a explicit route for this (route add
mpp_anycast_address msh0 on the clients).

-- 
Luis Carlos Cobo Rus       GnuPG ID: 44019B60
cozybit Inc.