[Openec] Uart TX HiZ?

[Frieder Ferlemann]

Hi Rafael,

thanks for the new dump!


Rafael Enrique Ortiz Guerrero schrieb:
> > Hi Frieder,
> > this settings changed for Q2c25 firmware
> > this are the new settings:
> >
> > GPIOO  fc00:   68  0 1e  0
> > GPIOE  fc10:   87 d7 fe  1  f bd
                   ^^
this one now has its bit 7 set (which should to my reading
switch GPIO07 (the RX pin, (U41,24)) to output...
Bit 6 for GPIO06 (U41,23) would still be input. I'm puzzled.

Greetings,
Frieder