Updates:<br><br>Both USB2VGA and USB2VGA2 work just fine on Build 23 on the 1.5's.<br><br>Neither work on any 11.2 build from os2 to os23 on the 1.0's. I have 5 XO 1.0s on the 'test bed', and installed all of the buildsto see if any worked.  None of them come up, with an external monitor.  Doing the 'check-mark' boot shows they stop booting at various places, some with the USB 8 buffers assigned (13.xxxxx) line mentioned in the ticket, some with a Starting Cronds, some with a Setting Hostname line.  However, to repeat, they never boot successfully, regardless of where it stops, with an adapter plugged in to any port on any 1.0 machine with any 11.2.<br>
<br>(Must say I don't miss those multiple keychain prompts after first install on the early builds)  :-)<br><br>Since it seems to never work on any build, if you like, I can concentrate on just os23 on multiple XO 1.0 machines on multiple USB ports and see if there are any differences in where it halts, even if I've previously plugged it in after boot or not.  I've had it get to the 3rd dot before hanging on a couple of occasions, and I think that's the time I see the 'Starting Cronds' on the console .  So, if I have a more directed rather than shotgun plan, perhaps I can be more helpful.<br>
<br>Just to be clear, i have verified that all 5 of these XO 1.0's work great with these same external adapters using Build 860 from 10.10.1.3.<br><br>Cheers, KG<br><br><br><br><br><br><div class="gmail_quote">On Sat, Jun 18, 2011 at 8:47 AM, Daniel Drake <span dir="ltr"><<a href="mailto:dsd@laptop.org">dsd@laptop.org</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div class="im">On 18 June 2011 13:39, Kevin Gordon <<a href="mailto:kgordon420@gmail.com">kgordon420@gmail.com</a>> wrote:<br>

> First results, and I do apologize but I wont have any more time until<br>
> tomorrow to test further<br>
><br>
> 3 different XO's:  USB2VGA and USB2VGA2 work first time everytime using<br>
> build 860.  Same 3 XO 1's, using os23 the external adapters work never.  Not<br>
> intermittently, never.  The single dot is the one with the V not the one<br>
> with the X.  There was one weird thing, on one of the USB ports on one of<br>
> the XO's it got to the third dot then the animation switched to the console<br>
> and then the machine hung.  For fun, plugging in the adapter after a boot,<br>
> LSUSB output does show the device correctly attached to the USB2 hub.  But<br>
> booting with the device attached to that port is still unsuccessful.  I have<br>
> *not* tried the XO 1.5's yet.<br>
<br>
</div>In this case you should boot with the check game key to (hopefully)<br>
see more info at the point of hang.<br>
<a href="http://wiki.laptop.org/go/Cheat_codes" target="_blank">http://wiki.laptop.org/go/Cheat_codes</a><br>
<br>
Thanks,<br>
<font color="#888888">Daniel<br>
</font></blockquote></div><br>