<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
The XO-1 will only see Ad-hoc XO-1.5 networks which currently have
XOs connected to them. It will not show all three Mayan icons
unless there is an XO-1.5 or other computers creating three Ad-hoc
networks, one with each of the desired names. <br>
<br>
You will have to manually connect the XO-1 to an Ad-hoc network; it
will not automatically do so.<br>
<br>
Unless you told them otherwise, by default all the XO-1.5s likely
decided to use Ad-hoc channel 1 if they did not see a preferred
access point, so you should go looking on the 10.1.3 XO-1 for a
filled color circle with a single dot in it. If the XO-1.5s were
near an access point they were taught about, they may have connected
to that instead. The ad-hoc networks on the XO-1 with 10.1.3 will
look like the filled-color (active) networks on the XO-1.5 using the
XO-1 user's colors to indicate that someone is listening on the
channel.<br>
<br>
It may take up to 30 or 60 seconds(?) from the time that an XO-1.5
created the Ad-hoc network to the point that an XO-1 will decide to
rescan to see what networks are out there. I'm hoping there are no
restrictions on rescanning once an XO-1 decides to connect to a Mesh
network.<br>
<br>
Admittedly the graphic
<a class="moz-txt-link-freetext" href="http://wiki.sugarlabs.org/go/File:Adhoc_network_XO-1.png">http://wiki.sugarlabs.org/go/File:Adhoc_network_XO-1.png</a> (available
from <a class="moz-txt-link-freetext" href="http://wiki.sugarlabs.org/go/Features/Ad_hoc_Networking">http://wiki.sugarlabs.org/go/Features/Ad_hoc_Networking</a>) is
someone confusing, since the XO-1 in that screenshot actually is
connected {has parenthesis} to a network which is neither the Ad-hoc
network spotted (on channel 11 - a dot and two lines) nor the Mesh
ones.<br>
<br>
<br>
<br>
On 2/6/2011 12:58 PM, Caryl Bigenho wrote:
<blockquote cite="mid:SNT112-W34380505DC1F4DF409B22BCCE80@phx.gbl"
type="cite">
<style><!--
.hmmessage P
{
margin:0px;
padding:0px
}
body.hmmessage
{
font-size: 10pt;
font-family:Tahoma
}
--></style>
OK I think I know what happened. First a question... how will the
ad hoc networks look on the XO-1? They were still targets on
these. Maybe I grabbed the wrong usb stick and put 10.1.2 on them
again... but I don't think so. <br>
<br>
I didn't see any parenthesis... just that the 2 XO-1s could see
each other fine, but they couldn't see the 1.5s, even with sharing
on. I started the Chat on a 1.5. Maybe it has to start on a 1.0?<br>
<br>
Caryl<br>
<br>
> Date: Sun, 6 Feb 2011 12:52:01 -0500<br>
> Subject: Re: [Testing] [support-gang] Lost Communication in
10.1.3?<br>
> From: <a class="moz-txt-link-abbreviated" href="mailto:gerald.ardito@gmail.com">gerald.ardito@gmail.com</a><br>
> To: <a class="moz-txt-link-abbreviated" href="mailto:cbigenho@hotmail.com">cbigenho@hotmail.com</a><br>
> CC: <a class="moz-txt-link-abbreviated" href="mailto:gerald.ardito@gmail.com">gerald.ardito@gmail.com</a>; <a class="moz-txt-link-abbreviated" href="mailto:support-gang@lists.laptop.org">support-gang@lists.laptop.org</a>;
<a class="moz-txt-link-abbreviated" href="mailto:devel@lists.laptop.org">devel@lists.laptop.org</a>; <a class="moz-txt-link-abbreviated" href="mailto:testing@lists.laptop.org">testing@lists.laptop.org</a>;
<a class="moz-txt-link-abbreviated" href="mailto:support-gang@laptop.org">support-gang@laptop.org</a><br>
> <br>
> Caryl,<br>
> <br>
> Once you connect to one of the ad-hoc networks, you will see
the<br>
> familiar parentheses surrounding it. Then, in the
Neighborhood View on<br>
> the the XOs, this network should appear as a wireless device.<br>
> <br>
> I would start troubleshooting by going o Settings and turning
the<br>
> radio off and then on again.<br>
> <br>
> Good luck.<br>
> <br>
> Gerald<br>
> <br>
> On Sunday, February 6, 2011, Caryl Bigenho
<a class="moz-txt-link-rfc2396E" href="mailto:cbigenho@hotmail.com"><cbigenho@hotmail.com></a> wrote:<br>
> ><br>
> ><br>
> ><br>
> ><br>
> ><br>
> > Hi Gerald,<br>
> ><br>
> > That was the first thing I tried and it didn't work for
me. I'll try it again when I get back from TX. How did you
connect the 1.0 to the network? They are still showing as access
points rather than the Mayan numerals on the 1.0s. Maybe I need
to do the install again.<br>
> ><br>
> > Caryl<br>
> ><br>
> >> Date: Sun, 6 Feb 2011 11:39:38 -0500<br>
> >> From: <a class="moz-txt-link-abbreviated" href="mailto:gerald.ardito@gmail.com">gerald.ardito@gmail.com</a><br>
> >> To: <a class="moz-txt-link-abbreviated" href="mailto:support-gang@lists.laptop.org">support-gang@lists.laptop.org</a><br>
> >> CC: <a class="moz-txt-link-abbreviated" href="mailto:devel@lists.laptop.org">devel@lists.laptop.org</a>;
<a class="moz-txt-link-abbreviated" href="mailto:testing@lists.laptop.org">testing@lists.laptop.org</a>; <a class="moz-txt-link-abbreviated" href="mailto:support-gang@laptop.org">support-gang@laptop.org</a><br>
> >> Subject: Re: [Testing] [support-gang] Lost
Communication in 10.1.3?<br>
> >><br>
> >> Caryl,<br>
> >><br>
> >> I have been able to make this work. Here's what I
did:<br>
> >> 1. Create an ad-hoc network on one of the 1.5s.<br>
> >> 2. Connect to it on the 1.0s.<br>
> >> 3. Open Chat and make public.<br>
> >><br>
> >> Hope this helps.<br>
> >> Gerald<br>
> >><br>
> >> On Sunday, February 6, 2011, Caryl Bigenho
<a class="moz-txt-link-rfc2396E" href="mailto:cbigenho@hotmail.com"><cbigenho@hotmail.com></a> wrote:<br>
> >> ><br>
> >> >tee's what I<br>
> >> ><br>
> >> ><br>
> >> >.<br>
> >><br>
> >> H<br>
> >> > Hi...<br>
> >> ><br>
> >> > Prepping some XOs for our booth at SCaLE 9X Feb
26-27. When I first started charging and testing I was running
10.1.2. I tried Chat and found that the XO-1s could easily chat
with the XO-1.5s.<br>
> >> ><br>
> >> > Then I updated all of them to 10.1.3, and this
ability seems to have been lost. While the XO-1.5s connected
right away to the ad hoc network, the XO-1s were totally left
out. They can only see each other.<br>
> >> ><br>
> >> > Is this an intentional change? Is there a way
for both models to communicate among themselves in 10.1.3?<br>
> >> ><br>
> >> > Caryl <br>
> >> ><br>
> >> _______________________________________________<br>
> >> Testing mailing list<br>
> >> <a class="moz-txt-link-abbreviated" href="mailto:Testing@lists.laptop.org">Testing@lists.laptop.org</a><br>
> >> <a class="moz-txt-link-freetext" href="http://lists.laptop.org/listinfo/testing">http://lists.laptop.org/listinfo/testing</a><br>
> > <br>
> ><br>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_______________________________________________
Devel mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Devel@lists.laptop.org">Devel@lists.laptop.org</a>
<a class="moz-txt-link-freetext" href="http://lists.laptop.org/listinfo/devel">http://lists.laptop.org/listinfo/devel</a>
</pre>
</blockquote>
<br>
</body>
</html>