Hi! We are using a software image based on dextrose, I know that the official OLPC software image is different, but for this question I think that is the same. <br>We want to install dextrose (suppose 10.1.3 image) with the firmware q2e42. <br>
What do you think? This is possible or we will have problems with this combination of firmware and software image?<br><br>Regards, Daniel.<br><br><div class="gmail_quote">---------- Forwarded message ----------<br>From: <b class="gmail_sendername">Daniel Castelo</b> <span dir="ltr"><<a href="mailto:dcastelo@plan.ceibal.edu.uy">dcastelo@plan.ceibal.edu.uy</a>></span><br>
Date: Tue, Feb 1, 2011 at 4:25 PM<br>Subject: Dextrose and Firmware q2e42<br>To: <a href="mailto:dextrose@lists.sugarlabs.org">dextrose@lists.sugarlabs.org</a><br><br><br>We have delivered dextrose 1.0 for our XO 1.5 machines, we want to release this version to XO 1.0 one's, but based on some bad experiences that we had in the past we aren't allowed to update the firmware (problems with some machines that remained broken after the process). The question is, if we have the firmware q2e42 installed, will dextrose (version 1) run properly in this machines? <br>

After a first test ( ten minutes one) seem that works, but I suppose that we could have some problems if we don't update the firmware to the last version. <br><br><br>Thanks<br>Daniel<br clear="all"><font color="#888888"><br>
-- <br>Ing. Daniel Castelo<br>
Plan Ceibal - Área Técnica<br>Avda. Italia 6201<br>Montevideo - Uruguay.<br>Tel.: 2 601 57 73 Interno 2228<br>E-mail : <a href="mailto:dcastelo@plan.ceibal.edu.uy" target="_blank">dcastelo@plan.ceibal.edu.uy</a><br>
</font></div><br><br clear="all"><br>-- <br>Ing. Daniel Castelo<br>Plan Ceibal - Área Técnica<br>Avda. Italia 6201<br>Montevideo - Uruguay.<br>Tel.: 2 601 57 73 Interno 2228<br>E-mail : <a href="mailto:dcastelo@plan.ceibal.edu.uy" target="_blank">dcastelo@plan.ceibal.edu.uy</a><br>