Touch Pad Double tap to select not working

[James Cameron]

And your Synaptics touchpads do work in firmware ok prompt on XO-4?

On Thu, May 21, 2015 at 05:47:49AM +0545, Bishnu Bidari wrote:
> As the XO with this touchpad is not even have tap-to-click on OK prompt test.
> Hence IMHO, the firmware is not supporting either. 
> 
> Thanks,
> Bishnu
> 
> On Thu, May 21, 2015 at 5:11 AM, Martin Langhoff <[1]martin.langhoff at gmail.com>
> wrote:
> 
>     Then maybe this is a new variant of Sentelic board which only works
>     partially with the driver in this kernel.
> 
>     This looks like a deep rabbit hole :-/
>    
>     m
> 
>     On May 20, 2015 6:36 PM, "James Cameron" <[2]quozl at laptop.org> wrote:
> 
>         Martin Langhoff wrote:
>         > James Cameron wrote:
>         > > It is either new touchpad firmware, or newer touchpad than
>         > > previous touchpad.
>         >
>         > Or a new kernel.
> 
>         Good idea; it may be the XO-4 kernel never had this feature working.
>         The XO-4 with working tap-to-click have different touchpad model.
> 
>         > Is the protocol in use FSPPS/2 ? If not, kernel may be missing FSP
>         > support, and reverting to "classic" compat protocol.
> 
>         CONFIG_MOUSE_PS2_SENTELIC=y is in .config, so this seems correct.
> 
>         --
>         James Cameron
>         [3]http://quozl.linux.org.au/
> 
> References:
> 
> [1] mailto:martin.langhoff at gmail.com
> [2] mailto:quozl at laptop.org
> [3] http://quozl.linux.org.au/

-- 
James Cameron
http://quozl.linux.org.au/