[Sugar-devel] XO on Fedora 20 (was Re: [GSoC] Porting To Python3)
Gonzalo Odiard
godiard at sugarlabs.org
Mon May 12 11:37:02 EDT 2014
Attached is Xorg.log from a 1.5 with 13.3.0
On Mon, May 12, 2014 at 12:26 PM, Daniel Narvaez <dwnarvaez at gmail.com>wrote:
> Does anyone have a xo1.5 with a stock image on it to verify if we get the
> drm error in the Xorg.log there too? I suppose we might have always been
> running without drm.
>
>
> On 12 May 2014 17:23, Daniel Narvaez <dwnarvaez at gmail.com> wrote:
>
>> Official 13.2.0 doesn't seem to have a chrome drm module either.
>> Confused...
>>
>>
>> On 12 May 2014 16:37, Daniel Narvaez <dwnarvaez at gmail.com> wrote:
>>
>>> Nothing apparently related in there. I wonder if the module is just
>>> missing. We have chrome drm sources in git
>>>
>>> http://dev.laptop.org/git/users/jnettlet/kernel-drm-chrome/
>>>
>>> But I'm not sure how they would be included in the build... I don't see
>>> an rpm for them in the dropbox.
>>>
>>>
>>> On 12 May 2014 16:32, Gonzalo Odiard <godiard at sugarlabs.org> wrote:
>>>
>>>> Sure
>>>>
>>>> bash-4.2# dmesg
>>>> [ 0.000000] Initializing cgroup subsys cpu
>>>> [ 0.000000] Linux version 3.3.8_xo1.5-20140212.1212.olpc.e98f01a
>>>> (root at localhost.localdomain) (gcc version 4.7.2 20121109 (Red Hat
>>>> 4.7.2-8) (GCC) ) #1 PREEMPT Wed Feb 12 12:22:19 EST 2014
>>>> [ 0.000000] OFW detected in memory, cif @ 0xff83ae48 (reserving top
>>>> 8MB)
>>>> [ 0.000000] Reserving virtual address space above 0xff800000
>>>> [ 0.000000] BIOS-provided physical RAM map:
>>>> [ 0.000000] BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
>>>> [ 0.000000] BIOS-e801: 0000000000100000 - 000000003b69a800 (usable)
>>>> [ 0.000000] Notice: NX (Execute Disable) protection cannot be
>>>> enabled: non-PAE kernel!
>>>> [ 0.000000] DMI 2.1 present.
>>>> [ 0.000000] DMI: OLPC XO/XO, BIOS OLPC Ver 1.00.15 07/11/2013
>>>> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
>>>> (usable) ==> (reserved)
>>>> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
>>>> (usable)
>>>> [ 0.000000] last_pfn = 0x3b69a max_arch_pfn = 0x100000
>>>> [ 0.000000] initial memory mapped : 0 - 01000000
>>>> [ 0.000000] Base memory trampoline at [b009c000] 9c000 size 12288
>>>> [ 0.000000] init_memory_mapping: 0000000000000000-000000003b69a000
>>>> [ 0.000000] 0000000000 - 0000400000 page 4k
>>>> [ 0.000000] 0000400000 - 003b400000 page 2M
>>>> [ 0.000000] 003b400000 - 003b69a000 page 4k
>>>> [ 0.000000] kernel direct mapping tables up to 3b69a000 @
>>>> ffb000-1000000
>>>> [ 0.000000] RAMDISK: 3b69aa00 - 3bdfd000
>>>> [ 0.000000] Allocated new RAMDISK: 3af37000 - 3b699600
>>>> [ 0.000000] Move RAMDISK from 000000003b69aa00 - 000000003bdfcfff to
>>>> 3af37000 - 3b6995ff
>>>> [ 0.000000] ACPI: RSDP 000e0000 00024 (v02 OLPC )
>>>> [ 0.000000] ACPI: RSDT 000e0040 00034 (v01 OLPC OLPC_000 30303030
>>>> OLPC 30303030)
>>>> [ 0.000000] ACPI: FACP 000e0080 00084 (v02 OLPC OLPC_000 30303030
>>>> OLPC 30303030)
>>>> [ 0.000000] ACPI: DSDT 000fc000 023CE (v01 OLPC XO-1.5 00000001
>>>> INTL 20061109)
>>>> [ 0.000000] ACPI: FACS 000e0180 00040
>>>> [ 0.000000] ACPI: DSDT 000fc000 023CE (v01 OLPC XO-1.5 00000001
>>>> INTL 20061109)
>>>> [ 0.000000] ACPI: APIC 000e0200 0005A (v01 OLPC OLPC_000 30303030
>>>> OLPC 30303030)
>>>> [ 0.000000] ACPI: HPET 000e0280 00038 (v01 OLPC OLPC_000 30303030
>>>> OLPC 30303030)
>>>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>>>> [ 0.000000] 950MB LOWMEM available.
>>>> [ 0.000000] mapped low ram: 0 - 3b69a000
>>>> [ 0.000000] low ram: 0 - 3b69a000
>>>> [ 0.000000] PROM DT: Built device tree with 49152 bytes of memory.
>>>> [ 0.000000] Zone PFN ranges:
>>>> [ 0.000000] DMA 0x00000010 -> 0x00001000
>>>> [ 0.000000] Normal 0x00001000 -> 0x0003b69a
>>>> [ 0.000000] Movable zone start PFN for each node
>>>> [ 0.000000] Early memory PFN ranges
>>>> [ 0.000000] 0: 0x00000010 -> 0x0000009f
>>>> [ 0.000000] 0: 0x00000100 -> 0x0003b69a
>>>> [ 0.000000] On node 0 totalpages: 243241
>>>> [ 0.000000] free_area_init_node: node 0, pgdat b08a6ec4,
>>>> node_mem_map ea7bb200
>>>> [ 0.000000] DMA zone: 32 pages used for memmap
>>>> [ 0.000000] DMA zone: 0 pages reserved
>>>> [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
>>>> [ 0.000000] Normal zone: 1870 pages used for memmap
>>>> [ 0.000000] Normal zone: 237388 pages, LIFO batch:31
>>>> [ 0.000000] Using APIC driver default
>>>> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
>>>> [ 0.000000] ACPI: Local APIC address 0xfee00000
>>>> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>>>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>>>> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>>>> [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI
>>>> 0-23
>>>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high
>>>> edge)
>>>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low
>>>> level)
>>>> [ 0.000000] ACPI: IRQ0 used by override.
>>>> [ 0.000000] ACPI: IRQ2 used by override.
>>>> [ 0.000000] ACPI: IRQ9 used by override.
>>>> [ 0.000000] ACPI: IRQ10 used by override.
>>>> [ 0.000000] Using ACPI (MADT) for SMP configuration information
>>>> [ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
>>>> [ 0.000000] nr_irqs_gsi: 40
>>>> [ 0.000000] Allocating PCI resources starting at 3b69a800 (gap:
>>>> 3b69a800:c4965800)
>>>> [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
>>>> [ 0.000000] pcpu-alloc: [0] 0
>>>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
>>>> Total pages: 241339
>>>> [ 0.000000] Kernel command line: console=ttyS0,115200 console=tty0
>>>> fbcon=font:SUN12x22 no_console_suspend selinux=0
>>>> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>>>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
>>>> 524288 bytes)
>>>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
>>>> bytes)
>>>> [ 0.000000] Initializing CPU#0
>>>> [ 0.000000] Memory: 950964k/973416k available (3358k kernel code,
>>>> 22000k reserved, 1434k data, 424k init, 0k highmem)
>>>> [ 0.000000] virtual kernel memory layout:
>>>> [ 0.000000] fixmap : 0xff7a3000 - 0xff7ff000 ( 368 kB)
>>>> [ 0.000000] vmalloc : 0xebe9a000 - 0xff7a1000 ( 313 MB)
>>>> [ 0.000000] lowmem : 0xb0000000 - 0xeb69a000 ( 950 MB)
>>>> [ 0.000000] .init : 0xb08af000 - 0xb0919000 ( 424 kB)
>>>> [ 0.000000] .data : 0xb0747a5d - 0xb08ae2c0 (1434 kB)
>>>> [ 0.000000] .text : 0xb0400000 - 0xb0747a5d (3358 kB)
>>>> [ 0.000000] Checking if this processor honours the WP bit even in
>>>> supervisor mode...Ok.
>>>> [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
>>>> [ 0.000000] CPU 0 irqstacks, hard=ea008000 soft=ea00a000
>>>> [ 0.000000] Console: colour dummy device 80x25
>>>> [ 0.000000] console [tty0] enabled
>>>> [ 0.000000] console [ttyS0] enabled
>>>> [ 0.000000] ODEBUG: 5 of 5 active objects replaced
>>>> [ 0.000000] ODEBUG: selftest passed
>>>> [ 0.000000] hpet clockevent registered
>>>> [ 0.000000] Fast TSC calibration using PIT
>>>> [ 0.000000] Detected 997.453 MHz processor.
>>>> [ 0.010004] Calibrating delay loop (skipped), value calculated using
>>>> timer frequency.. 1994.90 BogoMIPS (lpj=9974530)
>>>> [ 0.022819] pid_max: default: 4096 minimum: 301
>>>> [ 0.030221] Security Framework initialized
>>>> [ 0.034414] Mount-cache hash table entries: 512
>>>> [ 0.043468] CPU: Centaur VIA C7-M Processor 1000MHz stepping 00
>>>> [ 0.050088] ACPI: Core revision 20120111
>>>> [ 0.063687] ftrace: allocating 18035 entries in 36 pages
>>>> [ 0.100159] Performance Events:
>>>> [ 0.110137] Enabling APIC mode: Flat. Using 1 I/O APICs
>>>> [ 0.116257] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>>>> [ 0.230397] devtmpfs: initialized
>>>> [ 0.234329] NET: Registered protocol family 16
>>>> [ 0.240020] OLPC board revision D5 (EC=60)
>>>> [ 0.244513] ACPI: bus type pci registered
>>>> [ 0.250885] PCI: Using configuration type 1 for base access
>>>> [ 0.260780] bio: create slab <bio-0> at 0
>>>> [ 0.265113] ACPI: Added _OSI(Module Device)
>>>> [ 0.269316] ACPI: Added _OSI(Processor Device)
>>>> [ 0.270021] ACPI: Added _OSI(3.0 _SCP Extensions)
>>>> [ 0.274744] ACPI: Added _OSI(Processor Aggregator Device)
>>>> [ 0.283369] ACPI: EC: Look up EC in DSDT
>>>> [ 0.299442] ACPI: Interpreter enabled
>>>> [ 0.300019] ACPI: (supports S0 S3 S5)
>>>> [ 0.303831] ACPI: Using IOAPIC for interrupt routing
>>>> [ 0.344357] ACPI: No dock devices found.
>>>> [ 0.348315] PCI: Using host bridge windows from ACPI; if necessary,
>>>> use "pci=nocrs" and report a bug
>>>> [ 0.350358] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>>>> [ 0.360475] pci_root PNP0A03:00: host bridge window [io
>>>> 0x0000-0x0cf7]
>>>> [ 0.370009] pci_root PNP0A03:00: host bridge window [io
>>>> 0x0d00-0xffff]
>>>> [ 0.376649] pci_root PNP0A03:00: host bridge window [mem
>>>> 0x000a0000-0x000bffff]
>>>> [ 0.380008] pci_root PNP0A03:00: host bridge window [mem
>>>> 0x000c0000-0x000dffff]
>>>> [ 0.390008] pci_root PNP0A03:00: host bridge window [mem
>>>> 0xfed40000-0xfed44fff]
>>>> [ 0.397340] pci_root PNP0A03:00: host bridge window [mem
>>>> 0x40000000-0xffe80000]
>>>> [ 0.400012] pci_root PNP0A03:00: host bridge window expanded to [mem
>>>> 0x40000000-0xffe80000]; [mem 0x40000000-0xffe80000] ignored
>>>> [ 0.410182] PCI host bridge to bus 0000:00
>>>> [ 0.420009] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
>>>> [ 0.426211] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
>>>> [ 0.430008] pci_bus 0000:00: root bus resource [mem
>>>> 0x000a0000-0x000bffff]
>>>> [ 0.440007] pci_bus 0000:00: root bus resource [mem
>>>> 0x000c0000-0x000dffff]
>>>> [ 0.446898] pci_bus 0000:00: root bus resource [mem
>>>> 0x40000000-0xffe80000]
>>>> [ 0.450054] pci 0000:00:00.0: [1106:0409] type 0 class 0x000600
>>>> [ 0.450170] pci 0000:00:00.1: [1106:1409] type 0 class 0x000600
>>>> [ 0.450271] pci 0000:00:00.2: [1106:2409] type 0 class 0x000600
>>>> [ 0.450374] pci 0000:00:00.3: [1106:3409] type 0 class 0x000600
>>>> [ 0.450475] pci 0000:00:00.4: [1106:4409] type 0 class 0x000600
>>>> [ 0.450577] pci 0000:00:00.5: [1106:5409] type 0 class 0x000800
>>>> [ 0.450715] pci 0000:00:00.6: [1106:6409] type 0 class 0x000600
>>>> [ 0.450818] pci 0000:00:00.7: [1106:7409] type 0 class 0x000600
>>>> [ 0.450918] pci 0000:00:01.0: [1106:5122] type 0 class 0x000300
>>>> [ 0.450953] pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xd3ffffff
>>>> pref]
>>>> [ 0.450977] pci 0000:00:01.0: reg 14: [mem 0xf0000000-0xf0ffffff]
>>>> [ 0.451038] pci 0000:00:01.0: reg 30: [mem 0x00000000-0x0000ffff
>>>> pref]
>>>> [ 0.451078] pci 0000:00:01.0: supports D1 D2
>>>> [ 0.451144] pci 0000:00:0c.0: [1106:95d0] type 0 class 0x000805
>>>> [ 0.451178] pci 0000:00:0c.0: reg 10: [mem 0x80000000-0x800000ff]
>>>> [ 0.451202] pci 0000:00:0c.0: reg 14: [mem 0x80001000-0x800010ff]
>>>> [ 0.451226] pci 0000:00:0c.0: reg 18: [mem 0x80002000-0x800020ff]
>>>> [ 0.451308] pci 0000:00:0c.0: supports D1 D2
>>>> [ 0.451320] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot
>>>> D3cold
>>>> [ 0.451374] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
>>>> [ 0.451452] pci 0000:00:10.0: reg 20: [io 0x8000-0x801f]
>>>> [ 0.451511] pci 0000:00:10.0: supports D1 D2
>>>> [ 0.451523] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot
>>>> D3cold
>>>> [ 0.451574] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
>>>> [ 0.451652] pci 0000:00:10.1: reg 20: [io 0x8020-0x803f]
>>>> [ 0.451712] pci 0000:00:10.1: supports D1 D2
>>>> [ 0.451723] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot
>>>> D3cold
>>>> [ 0.451772] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
>>>> [ 0.451851] pci 0000:00:10.2: reg 20: [io 0x8040-0x805f]
>>>> [ 0.451910] pci 0000:00:10.2: supports D1 D2
>>>> [ 0.451921] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot
>>>> D3cold
>>>> [ 0.451979] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
>>>> [ 0.452017] pci 0000:00:10.4: reg 10: [mem 0x80003000-0x800030ff]
>>>> [ 0.452127] pci 0000:00:10.4: supports D1 D2
>>>> [ 0.452138] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot
>>>> D3cold
>>>> [ 0.452192] pci 0000:00:11.0: [1106:8409] type 0 class 0x000601
>>>> [ 0.452364] pci 0000:00:11.7: [1106:a353] type 0 class 0x000600
>>>> [ 0.452463] pci 0000:00:13.0: [1106:b353] type 1 class 0x000604
>>>> [ 0.452586] pci 0000:00:14.0: [1106:3288] type 0 class 0x000403
>>>> [ 0.452619] pci 0000:00:14.0: reg 10: [mem 0x80004000-0x80007fff
>>>> 64bit]
>>>> [ 0.452716] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
>>>> [ 0.452855] pci 0000:00:13.0: PCI bridge to [bus 01-01]
>>>> [ 0.460029] pci_bus 0000:00: on NUMA node 0
>>>> [ 0.460047] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>>>> [ 0.460749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
>>>> [ 0.461125] pci0000:00: Unable to request _OSC control (_OSC
>>>> support mask: 0x08)
>>>> [ 0.500285] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11
>>>> 12 14 15)
>>>> [ 0.507867] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12
>>>> 14 15) *9
>>>> [ 0.513232] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11
>>>> 12 14 15)
>>>> [ 0.523028] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11
>>>> 12 14 15)
>>>> [ 0.530806] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
>>>> 14 15) *0, disabled.
>>>> [ 0.539554] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
>>>> 14 15) *0, disabled.
>>>> [ 0.544210] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12
>>>> 14 15) *0, disabled.
>>>> [ 0.554201] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12
>>>> 14 15) *0, disabled.
>>>> [ 0.564556] SCSI subsystem initialized
>>>> [ 0.570098] usbcore: registered new interface driver usbfs
>>>> [ 0.575656] usbcore: registered new interface driver hub
>>>> [ 0.580129] usbcore: registered new device driver usb
>>>> [ 0.585500] Advanced Linux Sound Architecture Driver Version 1.0.24.
>>>> [ 0.590016] PCI: Using ACPI for IRQ routing
>>>> [ 0.594222] PCI: pci_cache_line_size set to 64 bytes
>>>> [ 0.594410] reserve RAM buffer: 000000000009f000 - 000000000009ffff
>>>> [ 0.594423] reserve RAM buffer: 000000003b69a800 - 000000003bffffff
>>>> [ 0.595299] Switching to clocksource hpet
>>>> [ 0.600037] cfg80211: Calling CRDA to update world regulatory domain
>>>> [ 0.610445] pnp: PnP ACPI init
>>>> [ 0.613570] ACPI: bus type pnp registered
>>>> [ 0.618015] pnp 00:00: [bus 00-ff]
>>>> [ 0.618027] pnp 00:00: [io 0x0cf8-0x0cff]
>>>> [ 0.618039] pnp 00:00: [io 0x0000-0x0cf7 window]
>>>> [ 0.618051] pnp 00:00: [io 0x0d00-0xffff window]
>>>> [ 0.618063] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>>>> [ 0.618076] pnp 00:00: [mem 0x000c0000-0x000dffff window]
>>>> [ 0.618089] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>>>> [ 0.618102] pnp 00:00: [mem 0x40000000-0xffe80000 window]
>>>> [ 0.618279] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03
>>>> (active)
>>>> [ 0.618704] pnp 00:01: [mem 0xe0000000-0xefffffff]
>>>> [ 0.618896] system 00:01: [mem 0xe0000000-0xefffffff] has been
>>>> reserved
>>>> [ 0.625582] system 00:01: Plug and Play ACPI device, IDs PNP0c01
>>>> (active)
>>>> [ 0.625654] pnp 00:02: [mem 0xfee00000-0xfee00fff]
>>>> [ 0.625666] pnp 00:02: [mem 0xfec00000-0xfec00fff]
>>>> [ 0.625821] system 00:02: [mem 0xfee00000-0xfee00fff] has been
>>>> reserved
>>>> [ 0.632476] system 00:02: [mem 0xfec00000-0xfec00fff] could not be
>>>> reserved
>>>> [ 0.639462] system 00:02: Plug and Play ACPI device, IDs PNP0c02
>>>> (active)
>>>> [ 0.639541] pnp 00:03: [irq 12]
>>>> [ 0.639666] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13
>>>> (active)
>>>> [ 0.639723] pnp 00:04: [io 0x0060]
>>>> [ 0.639733] pnp 00:04: [io 0x0064]
>>>> [ 0.639749] pnp 00:04: [irq 1]
>>>> [ 0.639888] pnp 00:04: Plug and Play ACPI device, IDs PNP0303
>>>> PNP030b (active)
>>>> [ 0.639943] pnp 00:05: [io 0x0000-0x000f]
>>>> [ 0.639954] pnp 00:05: [io 0x0081-0x0083]
>>>> [ 0.639964] pnp 00:05: [io 0x0087]
>>>> [ 0.639974] pnp 00:05: [io 0x0089-0x008b]
>>>> [ 0.639985] pnp 00:05: [io 0x008f]
>>>> [ 0.639995] pnp 00:05: [io 0x00c0-0x00df]
>>>> [ 0.640023] pnp 00:05: [dma 4]
>>>> [ 0.640124] pnp 00:05: Plug and Play ACPI device, IDs PNP0200
>>>> (active)
>>>> [ 0.640174] pnp 00:06: [io 0x0070-0x0071]
>>>> [ 0.640185] pnp 00:06: [io 0x0074-0x0075]
>>>> [ 0.640202] pnp 00:06: [irq 8]
>>>> [ 0.640308] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00
>>>> (active)
>>>> [ 0.640377] pnp 00:07: [io 0x00f0]
>>>> [ 0.640393] pnp 00:07: [irq 13]
>>>> [ 0.640514] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04
>>>> (active)
>>>> [ 0.640572] pnp 00:08: [io 0x0061]
>>>> [ 0.640680] pnp 00:08: Plug and Play ACPI device, IDs PNP0800
>>>> (active)
>>>> [ 0.650548] pnp 00:09: [mem 0xfed00000-0xfed003ff]
>>>> [ 0.650692] pnp 00:09: Plug and Play ACPI device, IDs PNP0103
>>>> (active)
>>>> [ 0.651345] pnp 00:0a: [io 0x0010-0x001f]
>>>> [ 0.651356] pnp 00:0a: [io 0x0022-0x003f]
>>>> [ 0.651367] pnp 00:0a: [io 0x0044-0x005f]
>>>> [ 0.651378] pnp 00:0a: [io 0x0062-0x0063]
>>>> [ 0.651388] pnp 00:0a: [io 0x0065-0x006f]
>>>> [ 0.651399] pnp 00:0a: [io 0x0072-0x0073]
>>>> [ 0.651410] pnp 00:0a: [io 0x0076-0x007e]
>>>> [ 0.651420] pnp 00:0a: [io 0x0080]
>>>> [ 0.651430] pnp 00:0a: [io 0x0084-0x0086]
>>>> [ 0.651440] pnp 00:0a: [io 0x0088]
>>>> [ 0.651451] pnp 00:0a: [io 0x008c-0x008e]
>>>> [ 0.651461] pnp 00:0a: [io 0x0090-0x0091]
>>>> [ 0.651472] pnp 00:0a: [io 0x0092]
>>>> [ 0.651482] pnp 00:0a: [io 0x0093-0x009e]
>>>> [ 0.651493] pnp 00:0a: [io 0x00a2-0x00bf]
>>>> [ 0.651503] pnp 00:0a: [io 0x00e0-0x00ef]
>>>> [ 0.651514] pnp 00:0a: [io 0x0380-0x0387]
>>>> [ 0.651525] pnp 00:0a: [io 0x03e0-0x03e7]
>>>> [ 0.651536] pnp 00:0a: [io 0x03f8-0x03ff]
>>>> [ 0.651546] pnp 00:0a: [io 0x04d0-0x04d1]
>>>> [ 0.651557] pnp 00:0a: [io 0x0400-0x047f]
>>>> [ 0.651568] pnp 00:0a: [io 0x0500-0x050f]
>>>> [ 0.651579] pnp 00:0a: [mem 0xfed30000-0xfed300ff]
>>>> [ 0.651591] pnp 00:0a: [mem 0xfed30000-0xfed30fff]
>>>> [ 0.651821] system 00:0a: [io 0x0380-0x0387] has been reserved
>>>> [ 0.657775] system 00:0a: [io 0x03e0-0x03e7] has been reserved
>>>> [ 0.663744] system 00:0a: [io 0x03f8-0x03ff] has been reserved
>>>> [ 0.669686] system 00:0a: [io 0x04d0-0x04d1] has been reserved
>>>> [ 0.675640] system 00:0a: [io 0x0400-0x047f] has been reserved
>>>> [ 0.681594] system 00:0a: [io 0x0500-0x050f] has been reserved
>>>> [ 0.687539] system 00:0a: [mem 0xfed30000-0xfed300ff] has been
>>>> reserved
>>>> [ 0.694190] system 00:0a: [mem 0xfed30000-0xfed30fff] could not be
>>>> reserved
>>>> [ 0.701194] system 00:0a: Plug and Play ACPI device, IDs PNP0c02
>>>> (active)
>>>> [ 0.701923] pnp 00:0b: [mem 0x00000000-0x0009ffff]
>>>> [ 0.701937] pnp 00:0b: [mem 0x00000000-0xffffffff disabled]
>>>> [ 0.701949] pnp 00:0b: [mem 0x000e0000-0x000fffff]
>>>> [ 0.701960] pnp 00:0b: [mem 0x00100000-0x3bffffff]
>>>> [ 0.702170] system 00:0b: [mem 0x00000000-0x0009ffff] could not be
>>>> reserved
>>>> [ 0.709159] system 00:0b: [mem 0x000e0000-0x000fffff] could not be
>>>> reserved
>>>> [ 0.716165] system 00:0b: [mem 0x00100000-0x3bffffff] could not be
>>>> reserved
>>>> [ 0.723162] system 00:0b: Plug and Play ACPI device, IDs PNP0c01
>>>> (active)
>>>> [ 0.723196] pnp: PnP ACPI: found 12 devices
>>>> [ 0.727399] ACPI: ACPI bus type pnp unregistered
>>>> [ 0.772709] PCI: max bus depth: 1 pci_try_num: 2
>>>> [ 0.772763] pci 0000:00:01.0: BAR 6: assigned [mem
>>>> 0x40000000-0x4000ffff pref]
>>>> [ 0.780040] pci 0000:00:13.0: PCI bridge to [bus 01-01]
>>>> [ 0.785318] pci 0000:00:13.0: setting latency timer to 64
>>>> [ 0.785334] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
>>>> [ 0.785346] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
>>>> [ 0.785359] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>>>> [ 0.785372] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>>>> [ 0.785386] pci_bus 0000:00: resource 8 [mem 0x40000000-0xffe80000]
>>>> [ 0.785595] NET: Registered protocol family 2
>>>> [ 0.790142] IP route cache hash table entries: 32768 (order: 5,
>>>> 131072 bytes)
>>>> [ 0.797967] TCP established hash table entries: 131072 (order: 8,
>>>> 1048576 bytes)
>>>> [ 0.808121] TCP bind hash table entries: 65536 (order: 8, 1310720
>>>> bytes)
>>>> [ 0.817235] TCP: Hash tables configured (established 131072 bind
>>>> 65536)
>>>> [ 0.823900] TCP reno registered
>>>> [ 0.827304] NET: Registered protocol family 1
>>>> [ 0.831776] pci 0000:00:01.0: Boot video device
>>>> [ 0.831996] PCI: CLS mismatch (32 != 64), using 64 bytes
>>>> [ 0.832019] pci 0000:00:13.0: disabling DAC on VIA PCI bridge
>>>> [ 0.837974] Trying to unpack rootfs image as initramfs...
>>>> [ 0.900925] Freeing initrd memory: 7564k freed
>>>> [ 0.919375] olpc-xo15-sci XO15EC:00: Initialized, GPE = 0x1
>>>> [ 1.039554] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>>>> [ 1.046319] VFS: Disk quotas dquot_6.5.2
>>>> [ 1.050327] Dquot-cache hash table entries: 1024 (order 0, 4096
>>>> bytes)
>>>> [ 1.057580] msgmni has been set to 1872
>>>> [ 1.061776] cryptomgr_test used greatest stack depth: 7700 bytes left
>>>> [ 1.068538] io scheduler noop registered
>>>> [ 1.072636] io scheduler cfq registered (default)
>>>> [ 1.077637] ioapic: probe of 0000:00:00.5 failed with error -22
>>>> [ 1.083781] VIA Graphics Integration Chipset framebuffer 2.4
>>>> initializing
>>>> [ 1.104018] gpiochip_add: registered GPIOs 250 to 255 on device:
>>>> VIAFB onboard GPIO
>>>> [ 1.137749] Console: switching to colour frame buffer device 100x40
>>>> [ 1.166274] input: Lid Switch as
>>>> /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0D:00/input/input0
>>>> [ 1.176097] ACPI: Lid Switch [LID]
>>>> [ 1.179981] input: Power Button as
>>>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>>>> [ 1.187908] ACPI: Power Button [PWRF]
>>>> [ 1.192080] Marking TSC unstable due to TSC halts in idle
>>>> [ 1.197869] ACPI: acpi_idle registered with cpuidle
>>>> [ 1.198265] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
>>>> [ 1.500195] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>>>> [ 1.507491] Non-volatile memory driver v1.3
>>>> [ 1.512018] VIA RNG detected
>>>> [ 1.515191] Linux agpgart interface v0.103
>>>> [ 1.535592] brd: module loaded
>>>> [ 1.550429] vx855_gpio vx855_gpio: found VX855 GPIO controller
>>>> [ 1.567985] gpiochip_add: registered GPIOs 0 to 41 on device: VX855
>>>> South Bridge
>>>> [ 1.587400] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
>>>> Driver
>>>> [ 1.605740] ehci_hcd 0000:00:10.4: EHCI Host Controller
>>>> [ 1.622614] ehci_hcd 0000:00:10.4: new USB bus registered, assigned
>>>> bus number 1
>>>> [ 1.641699] ehci_hcd 0000:00:10.4: debug port 1
>>>> [ 1.657630] ehci_hcd 0000:00:10.4: irq 23, io mem 0x80003000
>>>> [ 1.690037] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
>>>> [ 1.707134] usb usb1: New USB device found, idVendor=1d6b,
>>>> idProduct=0002
>>>> [ 1.725371] usb usb1: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 1.744023] usb usb1: Product: EHCI Host Controller
>>>> [ 1.760231] usb usb1: Manufacturer: Linux
>>>> 3.3.8_xo1.5-20140212.1212.olpc.e98f01a ehci_hcd
>>>> [ 1.780015] usb usb1: SerialNumber: 0000:00:10.4
>>>> [ 1.796481] hub 1-0:1.0: USB hub found
>>>> [ 1.811511] hub 1-0:1.0: 6 ports detected
>>>> [ 1.826887] uhci_hcd: USB Universal Host Controller Interface driver
>>>> [ 1.844628] uhci_hcd 0000:00:10.0: UHCI Host Controller
>>>> [ 1.861016] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
>>>> bus number 2
>>>> [ 1.879847] uhci_hcd 0000:00:10.0: irq 20, io base 0x00008000
>>>> [ 1.896981] usb usb2: New USB device found, idVendor=1d6b,
>>>> idProduct=0001
>>>> [ 1.915136] usb usb2: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 1.933677] usb usb2: Product: UHCI Host Controller
>>>> [ 1.949572] usb usb2: Manufacturer: Linux
>>>> 3.3.8_xo1.5-20140212.1212.olpc.e98f01a uhci_hcd
>>>> [ 1.969019] usb usb2: SerialNumber: 0000:00:10.0
>>>> [ 1.984997] hub 2-0:1.0: USB hub found
>>>> [ 1.999356] hub 2-0:1.0: 2 ports detected
>>>> [ 2.014184] uhci_hcd 0000:00:10.1: UHCI Host Controller
>>>> [ 2.029936] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
>>>> bus number 3
>>>> [ 2.047987] uhci_hcd 0000:00:10.1: irq 22, io base 0x00008020
>>>> [ 2.064258] usb usb3: New USB device found, idVendor=1d6b,
>>>> idProduct=0001
>>>> [ 2.081557] usb usb3: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 2.099261] usb usb3: Product: UHCI Host Controller
>>>> [ 2.114554] usb usb3: Manufacturer: Linux
>>>> 3.3.8_xo1.5-20140212.1212.olpc.e98f01a uhci_hcd
>>>> [ 2.133547] usb usb3: SerialNumber: 0000:00:10.1
>>>> [ 2.149342] hub 3-0:1.0: USB hub found
>>>> [ 2.163843] hub 3-0:1.0: 2 ports detected
>>>> [ 2.178688] uhci_hcd 0000:00:10.2: UHCI Host Controller
>>>> [ 2.194414] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
>>>> bus number 4
>>>> [ 2.212399] uhci_hcd 0000:00:10.2: irq 21, io base 0x00008040
>>>> [ 2.228640] usb usb4: New USB device found, idVendor=1d6b,
>>>> idProduct=0001
>>>> [ 2.245957] usb usb4: New USB device strings: Mfr=3, Product=2,
>>>> SerialNumber=1
>>>> [ 2.263729] usb usb4: Product: UHCI Host Controller
>>>> [ 2.279227] usb usb4: Manufacturer: Linux
>>>> 3.3.8_xo1.5-20140212.1212.olpc.e98f01a uhci_hcd
>>>> [ 2.298455] usb usb4: SerialNumber: 0000:00:10.2
>>>> [ 2.314310] hub 4-0:1.0: USB hub found
>>>> [ 2.328803] hub 4-0:1.0: 2 ports detected
>>>> [ 2.343622] Initializing USB Mass Storage driver...
>>>> [ 2.359043] usbcore: registered new interface driver usb-storage
>>>> [ 2.375504] USB Mass Storage support registered.
>>>> [ 2.390649] usbcore: registered new interface driver libusual
>>>> [ 2.407166] usbcore: registered new interface driver usbserial
>>>> [ 2.423510] USB Serial support registered for generic
>>>> [ 2.439051] usbcore: registered new interface driver
>>>> usbserial_generic
>>>> [ 2.456191] usbserial: USB Serial Driver core
>>>> [ 2.471191] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
>>>> at 0x60,0x64 irq 1,12
>>>> [ 2.515567] serio: i8042 KBD port at 0x60,0x64 irq 1
>>>> [ 2.531378] serio: i8042 AUX port at 0x60,0x64 irq 12
>>>> [ 2.547459] rtc_cmos 00:06: RTC can wake from S4
>>>> [ 2.562780] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>>>> [ 2.579238] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet
>>>> irqs
>>>> [ 2.596641] Linux video capture interface: v2.00
>>>> [ 2.642769] input: AT Translated Set 2 keyboard as
>>>> /devices/platform/i8042/serio0/input/input2
>>>> [ 2.880756] hwmon_vid: Using 6-bit VID table for VIA C7-M CPU
>>>> [ 2.912789] cpuidle: using governor ladder
>>>> [ 2.952099] cpuidle: using governor menu
>>>> [ 2.973686] sdhci: Secure Digital Host Controller Interface driver
>>>> [ 3.011790] sdhci: Copyright(c) Pierre Ossman
>>>> [ 3.049995] sdhci-pci 0000:00:0c.0: SDHCI controller found
>>>> [1106:95d0] (rev 10)
>>>> [ 3.078233] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.078269] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.078353] Registered led device: mmc0::
>>>> [ 3.078463] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.079570] mmc0: SDHCI controller on PCI [0000:00:0c.0] using DMA
>>>> [ 3.121676] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.121706] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.121792] Registered led device: mmc1::
>>>> [ 3.121875] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.122901] mmc1: SDHCI controller on PCI [0000:00:0c.0] using DMA
>>>> [ 3.165804] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.165832] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.165905] Registered led device: mmc2::
>>>> [ 3.165982] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.167008] mmc2: SDHCI controller on PCI [0000:00:0c.0] using DMA
>>>> [ 3.191892] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.213208] usbcore: registered new interface driver usbhid
>>>> [ 3.268417] usbhid: USB HID core driver
>>>> [ 3.282674] i2c-core: driver [olpc_dcon] using legacy suspend method
>>>> [ 3.311938] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.335036] i2c-core: driver [olpc_dcon] using legacy resume method
>>>> [ 3.373452] olpc-dcon: Discovered DCON version 2
>>>> [ 3.388581] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.421446] input: EBook Switch as
>>>> /devices/LNXSYSTM:00/device:00/PNP0A03:00/XO15EBK:00/input/input3
>>>> [ 3.453388] modprobe used greatest stack depth: 7064 bytes left
>>>> [ 3.473486] snd_hda_intel 0000:00:14.0: enabling device (0000 ->
>>>> 0002)
>>>> [ 3.490973] sdhci-pci 0000:00:0c.0: setting latency timer to 64
>>>> [ 3.502125] snd_hda_intel 0000:00:14.0: PCI: Disallowing DAC for
>>>> device
>>>> [ 3.568721] mmc1: new SDIO card at address 0001
>>>> [ 3.600235] ALSA device list:
>>>> [ 3.613948] #0: HDA VIA VT82xx at 0x80004000 irq 17
>>>> [ 3.631054] TCP bic registered
>>>> [ 3.644670] Initializing XFRM netlink socket
>>>> [ 3.659918] NET: Registered protocol family 10
>>>> [ 3.678679] Mobile IPv6
>>>> [ 3.691624] NET: Registered protocol family 17
>>>> [ 3.706546] lib80211: common routines for IEEE802.11 drivers
>>>> [ 3.722622] lib80211_crypt: registered algorithm 'NULL'
>>>> [ 3.722632] Registering the dns_resolver key type
>>>> [ 3.737603] Using IPI Shortcut mode
>>>> [ 3.755836] Freeing unused kernel memory: 424k freed
>>>> [ 3.772443] Write protecting the kernel text: 3360k
>>>> [ 3.787931] Write protecting the kernel read-only data: 1176k
>>>> [ 3.820291] mmc2: new high speed SDHC card at address bcc2
>>>> [ 3.839273] init used greatest stack depth: 6988 bytes left
>>>> [ 3.855300] mmcblk0: mmc2:bcc2 SU04G 3.69 GiB
>>>> [ 3.874317] tmpfs: No value for mount option 'strictatime'
>>>> [ 3.890440] mount used greatest stack depth: 6880 bytes left
>>>> [ 3.915588] mmcblk0: p1 p2
>>>> [ 3.938941] tmpfs: No value for mount option 'strictatime'
>>>> [ 3.970313] mount used greatest stack depth: 6752 bytes left
>>>> [ 3.991489] tmpfs: No value for mount option 'strictatime'
>>>> [ 4.052810] dracut: dracut-18 (Spherical Cow)
>>>> dracut-024-18.git20130102.fc18
>>>> [ 4.098936] systemd-udevd[66]: starting version 195
>>>> [ 4.127600] udevadm used greatest stack depth: 6632 bytes left
>>>> [ 5.818870] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly
>>>> filesystem
>>>> [ 5.837100] EXT4-fs (mmcblk0p2): write access will be enabled during
>>>> recovery
>>>> [ 5.957634] EXT4-fs (mmcblk0p2): recovery complete
>>>> [ 5.977347] EXT4-fs (mmcblk0p2): mounted filesystem with ordered
>>>> data mode. Opts: (null)
>>>> [ 6.018188] dracut: Remounting /dev/disk/mmc/mmc2p2 with -o
>>>> [ 6.036643] EXT4-fs (mmcblk0p2): re-mounted. Opts:
>>>> user_xattr,barrier=1,data=ordered
>>>> [ 6.055839] init used greatest stack depth: 6604 bytes left
>>>> [ 6.091184] dracut: Mounted root filesystem /dev/disk/mmc/mmc2p2
>>>> [ 6.123244] EXT4-fs (mmcblk0p2): re-mounted. Opts:
>>>> user_xattr,barrier=1,data=ordered
>>>> [ 6.149415] EXT4-fs (mmcblk0p1): warning: mounting unchecked fs,
>>>> running e2fsck is recommended
>>>> [ 6.171807] EXT4-fs (mmcblk0p1): mounted filesystem without journal.
>>>> Opts: (null)
>>>> [ 6.247717] Dsize 7744512 Psize 7605248 Pstart 139264 Pend 7744512
>>>> [ 7.300442] plymouthd used greatest stack depth: 6312 bytes left
>>>> [ 7.703585] dcon_freeze_store: 0
>>>> [ 7.707095] dcon_source_switch to CPU
>>>> [ 7.751790] olpc-dcon: The CPU has control
>>>> [ 7.845836] dracut: Switching root
>>>> [ 8.522271] systemd[1]: systemd 208 running in system mode. (+PAM
>>>> +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>>>> [ 8.543465] systemd[1]: Set hostname to <xo-a7-32-6d.localdomain>.
>>>> [ 9.605502] systemd[1]: Started Replay Read-Ahead Data.
>>>> [ 9.610858] systemd[1]: Starting Forward Password Requests to Wall
>>>> Directory Watch.
>>>> [ 9.618884] systemd[1]: Started Forward Password Requests to Wall
>>>> Directory Watch.
>>>> [ 9.626554] systemd[1]: Expecting device dev-ttyS0.device...
>>>> [ 9.632413] systemd[1]: Starting Remote File Systems.
>>>> [ 9.637607] systemd[1]: Reached target Remote File Systems.
>>>> [ 9.643265] systemd[1]: Starting /dev/initctl Compatibility Named
>>>> Pipe.
>>>> [ 9.650130] systemd[1]: Listening on /dev/initctl Compatibility
>>>> Named Pipe.
>>>> [ 9.657133] systemd[1]: Starting Delayed Shutdown Socket.
>>>> [ 9.662781] systemd[1]: Listening on Delayed Shutdown Socket.
>>>> [ 9.668609] systemd[1]: Starting Dispatch Password Requests to
>>>> Console Directory Watch.
>>>> [ 9.676842] systemd[1]: Started Dispatch Password Requests to
>>>> Console Directory Watch.
>>>> [ 9.685927] systemd[1]: Starting Paths.
>>>> [ 9.689953] systemd[1]: Reached target Paths.
>>>> [ 9.694432] systemd[1]: Starting udev Kernel Socket.
>>>> [ 9.699615] systemd[1]: Listening on udev Kernel Socket.
>>>> [ 9.705021] systemd[1]: Starting udev Control Socket.
>>>> [ 9.710342] systemd[1]: Listening on udev Control Socket.
>>>> [ 9.715798] systemd[1]: Starting Encrypted Volumes.
>>>> [ 9.720843] systemd[1]: Reached target Encrypted Volumes.
>>>> [ 9.726318] systemd[1]: Starting Journal Socket.
>>>> [ 9.731292] systemd[1]: Listening on Journal Socket.
>>>> [ 9.736343] systemd[1]: Starting udev Coldplug all Devices...
>>>> [ 9.758486] systemd[1]: Starting Apply Kernel Variables...
>>>> [ 9.765903] systemd[1]: Starting Setup Virtual Console...
>>>> [ 9.775452] systemd[1]: Mounting Debug File System...
>>>> [ 9.824449] systemd[1]: Started Load Kernel Modules.
>>>> [ 9.829578] systemd[1]: Mounted FUSE Control File System.
>>>> [ 9.889367] systemd[1]: Starting Create list of required static
>>>> device nodes for the current kernel...
>>>> [ 9.901033] systemd[1]: Starting Journal Service...
>>>> [ 9.911159] systemd[1]: Started Journal Service.
>>>> [ 10.817387] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
>>>> [ 11.052166] systemd-udevd[232]: starting version 208
>>>> [ 12.747405] Via camera: serial port is enabled, refusing to load.
>>>> [ 12.778865] libertas_sdio: Libertas SDIO driver
>>>> [ 12.806068] Specify override_serial=1 to force module loading.
>>>> [ 12.859788] libertas_sdio: Copyright Pierre Ossman
>>>> [ 13.006488] viafb-camera: probe of viafb-camera failed with error -16
>>>> [ 13.069803] systemd-journald[206]: Received request to flush runtime
>>>> journal from PID 1
>>>> [ 13.357450] psmouse serio1: synaptics: OLPC XO detected, not
>>>> enabling Synaptics protocol.
>>>> [ 13.557124] usbcore: registered new interface driver sisusb
>>>> [ 13.679036] usbcore: registered new interface driver udlfb
>>>> [ 13.766159] usbcore: deregistering interface driver sisusb
>>>> [ 13.788618] usbcore: deregistering interface driver udlfb
>>>> [ 13.943543] runin-check: noop
>>>> [ 14.553320] input: PS/2 Synaptics TouchPad as
>>>> /devices/platform/i8042/serio1/input/input4
>>>> [ 14.598784] mousedev: PS/2 mouse device common for all mice
>>>> [ 14.848613] dcon_freeze_store: 1
>>>> [ 14.852368] dcon_source_switch to DCON
>>>> [ 14.857601] libertas_sdio mmc1:0001:1: (unregistered net_device):
>>>> 00:17:c4:a7:32:6d, fw 9.70.20p0, cap 0x000003a3
>>>> [ 14.879904] libertas_sdio mmc1:0001:1: wlan0: Marvell WLAN 802.11
>>>> adapter
>>>> [ 14.893277] olpc-dcon: The DCON has control
>>>> [ 15.432974] input: olpc-kbdshim virtual keyboard as
>>>> /devices/virtual/input/input5
>>>> [ 15.477577] input: olpc-kbdshim virtual mouse as
>>>> /devices/virtual/input/input6
>>>> [ 16.064894] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2,
>>>> id: 0x92a0b1, caps: 0xa04711/0x200000/0x0
>>>> [ 16.239130] input: SynRelPS/2 Synaptics TouchPad as
>>>> /devices/platform/i8042/serio1/input/input7
>>>> [ 16.945560] systemd-udevd[244]: renamed network interface wlan0 to
>>>> eth0
>>>> [ 18.203809] ip_tables: (C) 2000-2006 Netfilter Core Team
>>>> [ 22.015895] ADDRCONF(NETDEV_UP): eth0: link is not ready
>>>> [ 50.582600] dcon_freeze_store: 0
>>>> [ 50.585900] dcon_source_switch to CPU
>>>> [ 50.623341] olpc-dcon: The CPU has control
>>>>
>>>>
>>>>
>>>> On Mon, May 12, 2014 at 11:21 AM, Daniel Narvaez <dwnarvaez at gmail.com>wrote:
>>>>
>>>>> I haven't really looked into this yet, but I wonder about this
>>>>>
>>>>>
>>>>> [ 32.849] [drm] failed to load kernel module "chrome"
>>>>> [ 32.849] (EE) [drm] drmOpen failed.
>>>>>
>>>>> Can you also post dmesg? I suppose it might have info about why
>>>>> loading the module failed.
>>>>>
>>>>>
>>>>>
>>>>> On 12 May 2014 16:16, Gonzalo Odiard <godiard at sugarlabs.org> wrote:
>>>>>
>>>>>> bash-4.2# cat /var/log/Xorg.0.log
>>>>>> [ 32.666]
>>>>>> X.Org X Server 1.14.4
>>>>>> Release Date: 2013-10-31
>>>>>> [ 32.666] X Protocol Version 11, Revision 0
>>>>>> [ 32.666] Build Operating System: 3.12.8-300.fc20.x86_64
>>>>>> [ 32.666] Current Operating System: Linux xo-a7-32-6d.localdomain
>>>>>> 3.3.8_xo1.5-20140212.1212.olpc.e98f01a #1 PREEMPT Wed Feb 12 12:22:19 EST
>>>>>> 2014 i686
>>>>>> [ 32.666] Kernel command line: console=ttyS0,115200 console=tty0
>>>>>> fbcon=font:SUN12x22 no_console_suspend selinux=0
>>>>>> [ 32.666] Build Date: 28 February 2014 03:35:45AM
>>>>>> [ 32.666] Build ID: xorg-x11-server 1.14.4-7.fc20
>>>>>> [ 32.666] Current version of pixman: 0.30.0
>>>>>> [ 32.666] Before reporting problems, check http://wiki.x.org
>>>>>> to make sure that you have the latest version.
>>>>>> [ 32.666] Markers: (--) probed, (**) from config file, (==)
>>>>>> default setting,
>>>>>> (++) from command line, (!!) notice, (II) informational,
>>>>>> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>>>>>> [ 32.666] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 12
>>>>>> 14:23:38 2014
>>>>>> [ 32.667] (==) Using config directory: "/etc/X11/xorg.conf.d"
>>>>>> [ 32.667] (==) Using system config directory
>>>>>> "/usr/share/X11/xorg.conf.d"
>>>>>> [ 32.668] (==) No Layout section. Using the first Screen section.
>>>>>> [ 32.668] (==) No screen section available. Using defaults.
>>>>>> [ 32.668] (**) |-->Screen "Default Screen Section" (0)
>>>>>> [ 32.668] (**) | |-->Monitor "<default monitor>"
>>>>>> [ 32.668] (==) No device specified for screen "Default Screen
>>>>>> Section".
>>>>>> Using the first device section listed.
>>>>>> [ 32.668] (**) | |-->Device "Configured Video Device"
>>>>>> [ 32.668] (==) No monitor specified for screen "Default Screen
>>>>>> Section".
>>>>>> Using a default monitor configuration.
>>>>>> [ 32.668] (**) Option "DontZap" "true"
>>>>>> [ 32.669] (**) Option "BlankTime" "0"
>>>>>> [ 32.669] (**) Option "StandbyTime" "0"
>>>>>> [ 32.669] (**) Option "SuspendTime" "0"
>>>>>> [ 32.669] (**) Option "OffTime" "0"
>>>>>> [ 32.669] (==) Automatically adding devices
>>>>>> [ 32.669] (==) Automatically enabling devices
>>>>>> [ 32.669] (==) Automatically adding GPU devices
>>>>>> [ 32.669] (==) FontPath set to:
>>>>>> catalogue:/etc/X11/fontpath.d,
>>>>>> built-ins
>>>>>> [ 32.669] (==) ModulePath set to "/usr/lib/xorg/modules"
>>>>>> [ 32.669] (**) Extension "DPMS" is disabled
>>>>>> [ 32.669] (II) The server relies on udev to provide the list of
>>>>>> input devices.
>>>>>> If no devices become available, reconfigure udev or disable
>>>>>> AutoAddDevices.
>>>>>> [ 32.669] (II) Loader magic: 0x826b6a0
>>>>>> [ 32.669] (II) Module ABI versions:
>>>>>> [ 32.669] X.Org ANSI C Emulation: 0.4
>>>>>> [ 32.669] X.Org Video Driver: 14.1
>>>>>> [ 32.669] X.Org XInput driver : 19.2
>>>>>> [ 32.669] X.Org Server Extension : 7.0
>>>>>> [ 32.672] (--) PCI:*(0:0:1:0) 1106:5122:152d:0833 rev 0, Mem @
>>>>>> 0xd0000000/67108864, 0xf0000000/16777216, BIOS @ 0x????????/65536
>>>>>> [ 32.672] Initializing built-in extension Generic Event Extension
>>>>>> [ 32.672] Initializing built-in extension SHAPE
>>>>>> [ 32.672] Initializing built-in extension MIT-SHM
>>>>>> [ 32.672] Initializing built-in extension XInputExtension
>>>>>> [ 32.673] Initializing built-in extension XTEST
>>>>>> [ 32.673] Initializing built-in extension BIG-REQUESTS
>>>>>> [ 32.673] Initializing built-in extension SYNC
>>>>>> [ 32.673] Initializing built-in extension XKEYBOARD
>>>>>> [ 32.673] Initializing built-in extension XC-MISC
>>>>>> [ 32.673] Initializing built-in extension XINERAMA
>>>>>> [ 32.673] Initializing built-in extension XFIXES
>>>>>> [ 32.673] Initializing built-in extension RENDER
>>>>>> [ 32.673] Initializing built-in extension RANDR
>>>>>> [ 32.673] Initializing built-in extension COMPOSITE
>>>>>> [ 32.673] Initializing built-in extension DAMAGE
>>>>>> [ 32.673] Initializing built-in extension MIT-SCREEN-SAVER
>>>>>> [ 32.673] Initializing built-in extension DOUBLE-BUFFER
>>>>>> [ 32.673] Initializing built-in extension RECORD
>>>>>> [ 32.673] Initializing built-in extension DPMS
>>>>>> [ 32.673] Initializing built-in extension X-Resource
>>>>>> [ 32.673] Initializing built-in extension XVideo
>>>>>> [ 32.673] Initializing built-in extension XVideo-MotionCompensation
>>>>>> [ 32.673] Initializing built-in extension SELinux
>>>>>> [ 32.673] Initializing built-in extension XFree86-VidModeExtension
>>>>>> [ 32.673] Initializing built-in extension XFree86-DGA
>>>>>> [ 32.673] Initializing built-in extension XFree86-DRI
>>>>>> [ 32.673] Initializing built-in extension DRI2
>>>>>> [ 32.673] (II) LoadModule: "glx"
>>>>>> [ 32.674] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
>>>>>> [ 32.674] (II) Module glx: vendor="X.Org Foundation"
>>>>>> [ 32.674] compiled for 1.14.4, module version = 1.0.0
>>>>>> [ 32.674] ABI class: X.Org Server Extension, version 7.0
>>>>>> [ 32.674] (==) AIGLX enabled
>>>>>> [ 32.674] Loading extension GLX
>>>>>> [ 32.674] (II) LoadModule: "chrome"
>>>>>> [ 32.675] (II) Loading /usr/lib/xorg/modules/drivers/chrome_drv.so
>>>>>> [ 32.676] (II) Module chrome: vendor="X.Org Foundation"
>>>>>> [ 32.676] compiled for 1.14.4, module version = 5.74.255
>>>>>> [ 32.676] Module class: X.Org Video Driver
>>>>>> [ 32.676] (II) chrome: driver for VIA chipsets: P4M800PRO, CX700,
>>>>>> K8M890, P4M890,
>>>>>> P4M900, VX800, VX855, VX900, CN750
>>>>>> [ 32.676] (++) using VT number 1
>>>>>>
>>>>>> [ 32.676] (WW) VGA arbiter: cannot open kernel arbiter, no
>>>>>> multi-card support
>>>>>> [ 32.676] (II) Loading sub module "vgahw"
>>>>>> [ 32.676] (II) LoadModule: "vgahw"
>>>>>> [ 32.677] (II) Loading /usr/lib/xorg/modules/libvgahw.so
>>>>>> [ 32.677] (II) Module vgahw: vendor="X.Org Foundation"
>>>>>> [ 32.677] compiled for 1.14.4, module version = 0.1.0
>>>>>> [ 32.677] ABI class: X.Org Video Driver, version 14.1
>>>>>> [ 32.677] (II) VIA(0): Detected kernel command queueing support
>>>>>> [ 32.677] (II) VIA(0): the driver module for this screen 0 is
>>>>>> "chrome" driver.
>>>>>> [ 32.677] (--) VIA(0): Chipset: "VX855"
>>>>>> [ 32.677] (--) VIA(0): Chipset Rev.: 0
>>>>>> [ 32.677] (II) VIA(0): Creating default Display subsection in
>>>>>> Screen section
>>>>>> "Default Screen Section" for depth/fbbpp 24/32
>>>>>> [ 32.677] (==) VIA(0): Depth 24, (--) framebuffer bpp 32
>>>>>> [ 32.677] (==) VIA(0): RGB weight 888
>>>>>> [ 32.677] (==) VIA(0): Default visual is TrueColor
>>>>>> [ 32.677] (II) Loading sub module "int10"
>>>>>> [ 32.678] (II) LoadModule: "int10"
>>>>>> [ 32.678] (II) Loading /usr/lib/xorg/modules/libint10.so
>>>>>> [ 32.678] (II) Module int10: vendor="X.Org Foundation"
>>>>>> [ 32.678] compiled for 1.14.4, module version = 1.0.0
>>>>>> [ 32.678] ABI class: X.Org Video Driver, version 14.1
>>>>>> [ 32.679] (EE) VIA(0): V_BIOS address 0x7bf60 out of range
>>>>>> [ 32.681] (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
>>>>>> [ 32.681] (II) Loading sub module "vt1625"
>>>>>> [ 32.681] (II) LoadModule: "vt1625"
>>>>>> [ 32.681] (WW) Warning, couldn't open module vt1625
>>>>>> [ 32.681] (II) UnloadModule: "vt1625"
>>>>>> [ 32.682] (II) Unloading vt1625
>>>>>> [ 32.682] (II) Loading sub module "ViaIntegratedTV"
>>>>>> [ 32.682] (II) LoadModule: "ViaIntegratedTV"
>>>>>> [ 32.682] (WW) Warning, couldn't open module ViaIntegratedTV
>>>>>> [ 32.682] (II) UnloadModule: "ViaIntegratedTV"
>>>>>> [ 32.682] (II) Unloading ViaIntegratedTV
>>>>>> [ 32.682] (II) Loading sub module "ad9389"
>>>>>> [ 32.682] (II) LoadModule: "ad9389"
>>>>>> [ 32.683] (WW) Warning, couldn't open module ad9389
>>>>>> [ 32.683] (II) UnloadModule: "ad9389"
>>>>>> [ 32.683] (II) Unloading ad9389
>>>>>> [ 32.683] (II) Loading sub module "sil164"
>>>>>> [ 32.683] (II) LoadModule: "sil164"
>>>>>> [ 32.684] (WW) Warning, couldn't open module sil164
>>>>>> [ 32.684] (II) UnloadModule: "sil164"
>>>>>> [ 32.684] (II) Unloading sil164
>>>>>> [ 32.684] (==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
>>>>>> [ 32.684] (--) VIA(0): videoram = 65536k
>>>>>> [ 32.684] (II) Loading sub module "i2c"
>>>>>> [ 32.684] (II) LoadModule: "i2c"
>>>>>> [ 32.684] (II) Module "i2c" already built-in
>>>>>> [ 32.684] (II) VIA(0): I2C bus "I2C bus 1" initialized.
>>>>>> [ 32.684] (II) VIA(0): I2C bus "I2C bus 2" initialized.
>>>>>> [ 32.684] (II) Loading sub module "fb"
>>>>>> [ 32.684] (II) LoadModule: "fb"
>>>>>> [ 32.684] (II) Loading /usr/lib/xorg/modules/libfb.so
>>>>>> [ 32.685] (II) Module fb: vendor="X.Org Foundation"
>>>>>> [ 32.685] compiled for 1.14.4, module version = 1.0.0
>>>>>> [ 32.685] ABI class: X.Org ANSI C Emulation, version 0.4
>>>>>> [ 32.685] (II) Loading sub module "exa"
>>>>>> [ 32.685] (II) LoadModule: "exa"
>>>>>> [ 32.685] (II) Loading /usr/lib/xorg/modules/libexa.so
>>>>>> [ 32.686] (II) Module exa: vendor="X.Org Foundation"
>>>>>> [ 32.686] compiled for 1.14.4, module version = 2.6.0
>>>>>> [ 32.686] ABI class: X.Org Video Driver, version 14.1
>>>>>> [ 32.686] (II) Loading sub module "ramdac"
>>>>>> [ 32.686] (II) LoadModule: "ramdac"
>>>>>> [ 32.686] (II) Module "ramdac" already built-in
>>>>>> [ 32.686] (II) Loading sub module "ddc"
>>>>>> [ 32.686] (II) LoadModule: "ddc"
>>>>>> [ 32.686] (II) Module "ddc" already built-in
>>>>>> [ 32.686] (II) VIA(0): Output CRT has no monitor section
>>>>>> [ 32.686] (II) VIA(0): Output DVI has no monitor section
>>>>>> [ 32.686] (II) VIA(0): Output LCD using monitor section LCD
>>>>>> [ 32.686] (**) VIA(0): Option "DIPort" "DFP_HIGHLOW,DVP1"
>>>>>> [ 32.686] (**) VIA(0): Option "PanelSize" "1200x900"
>>>>>> [ 32.686] (II) VIA(0): Output TV has no monitor section
>>>>>> [ 32.686] (II) VIA(0): Output HDMI has no monitor section
>>>>>> [ 32.686] (II) VIA(0): Output DP has no monitor section
>>>>>> [ 32.686] (II) VIA(0): Output DP-2 has no monitor section
>>>>>> [ 32.686] (II) VIA(0): Output LCD-2 has no monitor section
>>>>>> [ 32.686] (II) VIA(0): Output CRT-2 has no monitor section
>>>>>> [ 32.703] (II) VIA(0): EDID for output CRT
>>>>>> [ 32.704] (II) VIA(0): Printing probed modes for output LCD
>>>>>> [ 32.704] (II) VIA(0): Modeline "1200x900"x49.7 57.27 1200 1211
>>>>>> 1243 1264 900 901 911 912 (45.3 kHz P)
>>>>>> [ 32.704] (II) VIA(0): Output CRT disconnected
>>>>>> [ 32.704] (II) VIA(0): Output LCD connected
>>>>>> [ 32.704] (II) VIA(0): Using exact sizes for initial modes
>>>>>> [ 32.704] (II) VIA(0): Output LCD using initial mode 1200x900 +0+0
>>>>>> [ 32.704] (II) VIA(0): Using default gamma of (1.0, 1.0, 1.0)
>>>>>> unless otherwise stated.
>>>>>> [ 32.704] (==) VIA(0): DPI set to (96, 96)
>>>>>> [ 32.704] (--) Depth 24 pixmap format is 32 bpp
>>>>>> [ 32.716] (II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
>>>>>> [ 32.716] (II) VIA(0): [drm] Detect H6 chipset: 0007 chipid: 5122
>>>>>> [ 32.806] (EE) VIA(0): DRM open error
>>>>>> [ 32.807] drmOpenDevice: node name is /dev/dri/card0
>>>>>> [ 32.812] drmOpenDevice: node name is /dev/dri/card0
>>>>>> [ 32.849] [drm] failed to load kernel module "chrome"
>>>>>> [ 32.849] (EE) [drm] drmOpen failed.
>>>>>> [ 32.849] (EE) VIA(0): [dri] DRIScreenInit failed. Disabling DRI.
>>>>>> [ 32.853] (II) VIA(0): H6 3D Engine has been initialized.
>>>>>> [ 32.853] (II) VIA(0): VIAInternalScreenInit
>>>>>> [ 32.854] DEBUG: maxPitchBytes 16383
>>>>>> [ 32.854] (II) EXA(0): Offscreen pixmap area of 60005344 bytes
>>>>>> [ 32.854] (II) EXA(0): Driver registered support for the following
>>>>>> operations:
>>>>>> [ 32.854] (II) Solid
>>>>>> [ 32.854] (II) Copy
>>>>>> [ 32.854] (II) Composite (RENDER acceleration)
>>>>>> [ 32.854] (II) VIA(0): Enable EXA Now
>>>>>> [ 32.854] (II) VIA(0): [EXA] Trying to enable EXA acceleration.
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Mon, May 12, 2014 at 11:03 AM, Daniel Narvaez <dwnarvaez at gmail.com
>>>>>> > wrote:
>>>>>>
>>>>>>> I'm not quite convinced this is due to the not initialized eth0 (I'm
>>>>>>> not sure what that is due too though). From the serial console are you able
>>>>>>> to see the content of /var/log/Xorg.0.log (assuming there is one)?
>>>>>>>
>>>>>>>
>>>>>>> On 12 May 2014 15:08, Gonzalo Odiard <godiard at sugarlabs.org> wrote:
>>>>>>>
>>>>>>>> log from xo-1.5
>>>>>>>>
>>>>>>>> Looks like eth0 is not initialized and all stop there.
>>>>>>>> Probably you already know that, but xo-1 and xo-1.5 have a 8686
>>>>>>>> wireless card, different to the 8787 in the xo-4
>>>>>>>>
>>>>>>>> Gonzalo
>>>>>>>>
>>>>>>>>
>>>>>>>> On Mon, May 12, 2014 at 9:36 AM, Daniel Narvaez <
>>>>>>>> dwnarvaez at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Ok, at least the partitions problem is fixed then. If Gonzalo can
>>>>>>>>> look at the logs with a serial port that might tell what is going on. I
>>>>>>>>> susoect the X driver but hard to say blindly :)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 12 May 2014 14:34, Martin Abente <
>>>>>>>>> martin.abente.lahaye at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Regarding XO 1.5 image, no more kernel panic, but as Gonzalo
>>>>>>>>>> mentioned the fading problem is still present.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Mon, May 12, 2014 at 7:53 AM, Gonzalo Odiard <
>>>>>>>>>> godiard at sugarlabs.org> wrote:
>>>>>>>>>>
>>>>>>>>>>> I will attach a serial cable later and report.
>>>>>>>>>>>
>>>>>>>>>>> Gonzalo
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Mon, May 12, 2014 at 8:51 AM, Daniel Narvaez <
>>>>>>>>>>> dwnarvaez at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> How far does it get? What are the last messages you see?
>>>>>>>>>>>>
>>>>>>>>>>>> Mostly I wonder if it's the partitions issue that tch reported
>>>>>>>>>>>> yesterday or if we fail when running X.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Monday, 12 May 2014, Gonzalo Odiard <godiard at sugarlabs.org>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> xo-1.5 image do not boot, and show a strange gey patterns in
>>>>>>>>>>>>> the screen.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Gonzalo
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, May 12, 2014 at 8:01 AM, Daniel Narvaez <
>>>>>>>>>>>>> dwnarvaez at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> The xo1 image boots into sugar (latest from git) and wifi
>>>>>>>>>>>>> works. I'm now building xo4 images
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 12 May 2014 02:12, Daniel Narvaez <dwnarvaez at gmail.com>wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> A couple more images, for xo1 and xo1.5. They have sugar
>>>>>>>>>>>>> packages built from latest sugar git. I have not tested them yet so they
>>>>>>>>>>>>> might not even boot, but if someone gives them a try please let me know how
>>>>>>>>>>>>> they works.
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://146.185.144.82:3000/images/xo1/1/
>>>>>>>>>>>>> http://146.185.144.82:3000/images/xo1.5/1/
>>>>>>>>>>>>>
>>>>>>>>>>>>> The xo1.5 one also *attempts* to fix the issue reported by
>>>>>>>>>>>>> Martin. The problem is that I'm running the x86 build slave inside
>>>>>>>>>>>>> docker.io, which doesn't like xpart. So I patched
>>>>>>>>>>>>> olpc-os-builder to manually losetup the partitions, but it's sort of tricky
>>>>>>>>>>>>> to get right. It will work eventually :)
>>>>>>>>>>>>>
>>>>>>>>>>>>> I have arm packages for latest git almost built, so tomorrow I
>>>>>>>>>>>>> should be able to build xo1.75 and xo4 images too. The oob configurations
>>>>>>>>>>>>> and some initial bits of automated builds infra are now here
>>>>>>>>>>>>>
>>>>>>>>>>>>> https://github.com/dnarvaez/xugar
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 11 May 2014 20:49, Daniel Narvaez <dwnarvaez at gmail.com>wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> This could be a change I made. I will investigate and let you
>>>>>>>>>>>>> know.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 11 May 2014 20:31, Martin Abente <
>>>>>>>>>>>>> martin.abente.lahaye at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hey Daniel,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Could you check if this is correct?
>>>>>>>>>>>>>
>>>>>>>>>>>>> $md5sum 10001xx1.zd
>>>>>>>>>>>>> $0cc8f3f71d636c8dc4464ffb8bf1847b 10001xx1.zd
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Tested with 2 different XOs 1.5 and I am getting kernel panic
>>>>>>>>>>>>> errors very early on the boot sequence, with message:
>>>>>>>>>>>>>
>>>>>>>>>>>>> tmpfs: No value for mount option 'strictatime'
>>>>>>>>>>>>> mount: mounting on /newrun failed: invalid argument
>>>>>>>>>>>>> mount used greatest stack depth 6752 bytes left.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Sun, May 11, 2014 at 12:47 PM, Gonzalo Odiard <
>>>>>>>>>>>>> godiard at sugarlabs.org> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Downloading...
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Sun, May 11, 2014 at 1:31 PM, Martin Abente <
>>>>>>>>>>>>> martin.abente.lahaye at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Downloading 10001xx1.zd , will let you know how it goes soon.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Sun, May 11, 2014 at 12:19 PM, Daniel Narvaez <
>>>>>>>>>>>>> dwnarvaez at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> I made builds for xo1 and xo1.5 with the firmware change
>>>>>>>>>>>>>
>>>>>>>>>>>>> <http://sugarlabs.org/~dnarvaez/oob/images/>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Daniel Narvaez
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Gonzalo Odiard
>>>>>>>>>>>
>>>>>>>>>>> SugarLabs - Software for children learning
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Daniel Narvaez
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Gonzalo Odiard
>>>>>>>>
>>>>>>>> SugarLabs - Software for children learning
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Daniel Narvaez
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Gonzalo Odiard
>>>>>>
>>>>>> SugarLabs - Software for children learning
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Daniel Narvaez
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Gonzalo Odiard
>>>>
>>>> SugarLabs - Software for children learning
>>>>
>>>
>>>
>>>
>>> --
>>> Daniel Narvaez
>>>
>>
>>
>>
>> --
>> Daniel Narvaez
>>
>
>
>
> --
> Daniel Narvaez
>
--
Gonzalo Odiard
SugarLabs - Software for children learning
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.laptop.org/pipermail/devel/attachments/20140512/a5be44d2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0.log
Type: text/x-log
Size: 20067 bytes
Desc: not available
URL: <http://lists.laptop.org/pipermail/devel/attachments/20140512/a5be44d2/attachment.bin>
More information about the Devel
mailing list