OS Builder output img ?

[Jerry Vonau]

On Sun, 2013-03-24 at 21:33 +0100, lionel at olpc-france.org wrote:
>  
> 
> Ok. I’ve done it.
> 
> Is it possible to have an auto install? i.e. without need to type
> command from the prompt.
> 

Yes, you would need to have your security keys installed in the XOs, but
that is difficult when the XO's have security enabled. You need a key
injector signed by OLPC to be able to install your deployment key that
you used to sign the image/firmware.

Jerry

>  
> 
>                 Lionel.
> 
>  
> 
> De : Samuel Greenfeld [mailto:greenfeld at laptop.org] 
> Envoyé : dimanche 24 mars 2013 14:40
> À : lionel at olpc-france.org
> Cc : devel at lists.laptop.org
> Objet : Re: OS Builder output img ?
> 
>  
> 
> The "fs0.zip" file would only appear if you configured everything to
> make a signed build.  You would only be able to make a signed build if
> you had a copy of the private keys for the deployment you are making
> the signed build for.   Only OLPC has the keys to make a signed build
> that pretty much any XO-1 will accept.
> 
> The .crc and .img files, when copied to USB, etc., are enough to
> install the image on a unlocked XO-1 with a command like "copy-nand u:
> \21007xx0.img" from the "ok" Open Firmware prompt (available if you
> press the "ESC"/(X) key while the startup sound plays on unlocked
> units).
> 
> 
> 
> 
>  
> 
> 
> _______________________________________________
> Devel mailing list
> Devel at lists.laptop.org
> http://lists.laptop.org/listinfo/devel