Difference in behaviour of "telepathy-gabble", when ejabberd is used with CentOS and Debian-6

Ajay Garg ajay at activitycentral.com
Mon Jan 21 01:11:22 EST 2013


On Mon, Jan 21, 2013 at 12:11 AM, Jerry Vonau <jvonau at shaw.ca> wrote:

> On Sun, 2013-01-20 at 13:44 +0530, Ajay Garg wrote:
> > Any ideas, please?  :)
> >
> >
>
> Ok, how about a couple of questions. What version of erlang is
> installed? Did you create the *online* group?
>

Oops... that was it !! :)

Creating the group did it :) :)


Thanks (yet again) Jerry !!! :) :)



>
> Jerry
>
>
> > On Fri, Jan 18, 2013 at 2:03 PM, Ajay Garg <ajay at activitycentral.com>
> > wrote:
> >         Hi all.
> >
> >         I have been trying to get buddies visible in the
> >         neighborhood-view, when XOs are communicating via
> >         ejabberd-server (via telepathy-gabble).
> >         Following are the two cases ::
> >
> >
> >         i)
> >         Client  :: Sugar (Fedora-18 based)
> >         Server :: ejabberd on CentOS (XS-0.7)
> >
> >         In this case, I am able to register the users on the server;
> >         and receive the  "members changed signals" (as per the
> >         attached PASS_telepathy_gabble.log).
> >         Of course, the buddies are able to see each other too :)
> >
> >
> >         ii)
> >         Client  :: Sugar (Fedora-18 based)
> >         Server :: ejabberd on Debian-6
> >
> >         In this case, I am able to register the users on the server;
> >         but DO NOT receive the "members changed signals" (as per the
> >         attached FAIL_telepathy_gabble.log).
> >         Hence, buddies are not able to see each other.
> >
> >
> >
> >         Some additional notes ::
> >         ==================
> >
> >         a)
> >         Both servers are running with the same  "ejabberd.cfg" file,
> >         as attached.
> >
> >
> >         b)
> >         On CentOS, following are effective, before starting
> >         ejabberd ::
> >
> >                                                    setenforce 0
> >                                                    service iptables
> >         stop
> >                                                    service ip6tables
> >         stop
> >
> >
> >         On Debian-6, following are effective, before starting
> >         ejabberd ::
> >
> >                                                    setenforce 0
> >                                                    iptables -F
> >                                                    iptables -X
> >                                                    iptables -t nat -F
> >                                                    iptables -t nat
> >         -X
> >                                                    iptables -t mangle
> >         -F
> >                                                    iptables -t mangle
> >         -X
> >                                                    ip6tables -F
> >                                                    ip6tables -X
> >                                                    ip6tables -t mangle
> >         -F
> >                                                    ip6tables -t mangle
> >         -X
> >
> >
> >
> >         c)
> >         Both servers are running the same ejabberd codebase (the
> >         patched version of 2.1.10), containing all the patches in
> >
> http://dev.laptop.org/xs/repos/stable/olpc/xs-0.7/source/ejabberd-2.1.10-1.el6.olpc1.src.rpm (Thanks again Jerry).
> >
> >         More  importantly, the issue of
> >         https://support.process-one.net/browse/EJAB-1533 is fixed via
> >         the "persist-all-pubsub.patch" (Thanks Daniel Drake).
> >         The buddy-properties are persisted, as seen via "ejabberdctl
> >         dump db.txt" (as seen on both CentOS and Debian).
> >
> >
> >
> ################################################################################################################
> >         However, very surprisingly, the "__get_members_ready_cb" still
> >         receives NOTHING in the failure-debian case          (see
> >         FAIL-shell.log),
> >
> >         but receives the buddy-properties in pass-CentOScase (see
> >         PASS-shell.log).
> >
> #################################################################################################################
> >
> >
> >
> >         d)
> >         Most importantly, on both the servers, the "Send XML Stream"
> >         log is seen in "/var/log/ejabberd/ejabberd.log"; however, the
> >         members-changed signal is seen only in the CentOS-ejabberd
> >         case, but not in Debian-6-ejabberd case.
> >
> >
> >         For brevity, I am also pasting the  "Send XML Stream" message
> >         (which happens to be the same on both the  servers) ::
> >
> ======================================================================================
> >
> >
> >         =INFO REPORT==== 2013-01-17 23:46:45 ===
> >         D(<0.360.0>:ejabberd_c2s:1561) : Send XML on stream =
> >         <<"<message
> >         from='
> 5ccefd7c37c12600296e0505ad3be79c0476e06e at schoolserver.mazaq.org' to='
> 5ccefd7c37c12600296e0505ad3be79c0476e06e at schoolserver.mazaq.org/sugar'
> type='headline'><event xmlns='http://jabber.org/protocol/pubsub#event'><items
> node='http://laptop.org/xmpp/buddy-properties'><item
> id='54E6D08D69C42'><properties xmlns='
> http://laptop.org/xmpp/buddy-properties'><property name='color'
> type='str'>#00A0FF,#9A5200</property><property name='key'
> type='bytes'>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
>  hIVGJ3QUFBSUVBcXlWdzMzM09GSU83TmRsY1lIVzZoZzVHY0hTUXJBblZmdWY3QWx0L1Z6bHp5cHRQTnN3NlRxN1RIWVcwOEEvVEUzUzd2dlU5WFNHVkhkY3R3Wm9yNmt3elRDYk83WSttUU1pdzViRmc4ZUNYeTcvZENPbHMzUmVhRmc3QVlobDlRR3hjS1ppUmNGRnJwOHVKVlIyQTl5YzZPSEt4Mjh4UmtBRjlkOUN5TDljPQ==</property></properties></item></items></event><addresses
> xmlns='http://jabber.org/protocol/address'><address type='replyto' jid='
> 5ccefd7c37c12600296e0505ad3be79c0476e06e at schoolserver.mazaq.org/sugar'/<http://5ccefd7c37c12600296e0505ad3be79c0476e06e@schoolserver.mazaq.org/sugar%27/>
> ></addresses></message>">>
> >
> >
> >         It seems that on Debian, the server is sending messages that
> >         SHOULD trigger the "__get_members_ready_cb" signal (with
> >         non-empty arguments), but somehow this doesn't happen (in
> >         Debian case, that is). :(
> >
> >
> >
> >
> >         So. has anyone tried ejabberd on Debian, and faced similar
> >         issues?
> >         Is it that some additional configuration is needed on Debian;
> >         or ejabberd truly doesn't talk gabble well on Debian?
> >
> >
> >         I will be grateful for any pointers on this; please let me
> >         know if you need me to do any additional tests on my side.
> >
> >
> >
> >         Regards,
> >
> >         Ajay Garg
> >         Dextrose Developer
> >         Activity Central: http://activitycentral.com
> >
> >
> >
> > --
> > Regards,
> >
> > Ajay Garg
> > Dextrose Developer
> > Activity Central: http://activitycentral.com
> > _______________________________________________
> > Devel mailing list
> > Devel at lists.laptop.org
> > http://lists.laptop.org/listinfo/devel
>
>
> _______________________________________________
> Devel mailing list
> Devel at lists.laptop.org
> http://lists.laptop.org/listinfo/devel
>



-- 
Regards,

Ajay Garg
Dextrose Developer
Activity Central: http://activitycentral.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.laptop.org/pipermail/devel/attachments/20130121/042b94b3/attachment.html>


More information about the Devel mailing list